碳质金矿中碳质物及其“劫金”机理研究进展

碳质金矿是重要的难处理金矿资源之一,碳质物“劫金”是金浸出率低下的主要原因。碳质物组分复杂,不同组分的碳质物的“劫金”能力和“劫金”行为存在差异,磨矿和浸出环节对碳质物的“劫金”能力也会产生影响,这些因素均能直接影响金的浸出率。通过系统总结碳质金矿中碳质物在组成特征、“劫金”机理及“劫金”能力的影响因素等方面的研究进展,对碳质物“劫金”机理现有研究工作的不足及未来研究方向进行了探讨,为碳质金矿碳质物劫金机理及预处理工艺的研究提供了重要参考。     

Fabrication of composite wire of lead coated on glass fiber by extrusion

1　INTRODUCTIONCoatingglassfiberwithleadproducesakindofnewcontinuouscomposite ,whichcanfindwideap plicationsinmanydifferentfields ,especiallyinthebatteryoftheEVsandHEVsthathasalreadybecomethemostimportantgoalinmostcountries[13] .Withakindofspecialtechnologythiskindofnewcompos itewirecanbeusedtoproducegridsofnewleadacidbatterythatisveryusefultotheEVsandHEVs .Thiskindofnewleadacidbatteryhasmanyadvan tages ,suchashigherspecificenergy ,lessinnerresis tance ,morequicklychargingcapabilityand…     

3D C/SiC复合材料在复杂环境试验中性能演变的两重性

用减压化学气相浸渗法(LPCVI)制备2组3D C/SiC复合材料,其中一组具有不同厚度的PyC界面层,另一组PyC界面层厚度一定,但经过热处理.对C/SiC复合材料在复杂环境中性能演变的两重性,即确定性和随机性进行了研究.结果表明,残余强度及其波动性对评价材料的环境适应性和可靠性是必需的.界面层和涂层是对氧化环境最敏感的微结构控制单元.以敏感度排序,3种环境参数依次是温度、气氛和应力.气氛参数的排序是氧气、水和盐,应力参数的排序是疲劳/蠕变,蠕变和疲劳.应力通过增加涂层裂纹及宽度从而加速复合材料的性能演变.氧化物薄膜有利于涂层裂纹封填,水能促进这种封填,然而疲劳/蠕变应力会使涂层裂纹封填失效.因此包括有氧气、水、疲劳和蠕变的环境是所有环境中最恶劣的.为了使复合材料具有自适应性,PyC的厚度应为最优,以提高热处理的效果;需保持适中的涂层氧化速率,以提高近表面抗氧化性.而适中的氧化速率是由温度和氧化气体分压来控制的.     

Thixoforging of continuous fiber-reinforced AlSi/AlMg-alloys

High strength in combination with low density is the key features for lightweight constructions in automotive and aerospace applications. Tailor-made fiber reinforcements in light-metal matrices could help to achieve this goal. However, the integration of fibers with conventional casting-route manufacturing techniques like squeeze casting or diffusion bonding restricts the component geometry and results in elevated process cost due to long cycle times and the need of additional fiber coatings. In the center of competence for casting and thixoforging Stuttgart (CCT), new processes for manufacturing metal matrix composites are developed. Long-fiber reinforced Al–Si alloys and components are produced by thixoforging of laminates made of alternating metal matrix layers and carbon fiber fabrics. This paper illustrates the manufacturing technology and first experimental results with special focus on fiber penetration and infiltration behavior and also on the formation of fiber-matrix interface to analyze fiber damage by mechanical or chemical attack.     

磷氮阻燃腈纶结构性能及阻燃机理研究

研究了含磷酸二氢铵和脲复合阻燃剂的共混阻燃腈纶的结构和性能。研究表明，在纤维成形加工过程中，部分阻燃剂聚合生成聚磷酸铵和聚脲，阻燃剂以微粒状均匀分散并包埋在纤维内部；阻燃剂的加入使纤维高序区大分子间等距离排列的规整性和片状结构单元等距离平行排列的程度降低，热稳定性亦略有下降；但纤维的宏形态结构及物理机械性能没有明显变化；磷氮阻燃腈纶具有良好的阻燃性和阻燃耐久性，经碱洗２０次、水洗３０次后，阻燃剂的磷和氮的保留率分别高达８２．９％和８９．５％，纤维的ＬＯＩ值仍在２６％以上。     

PHENOL RECOVERY WITH SLM USING “CYANEX 923”

The study of the phenol separation-concentration process with the hollow fiber supported liquid membrane technology has been performed. Mixtures of kerosene and CYANEX 923 were used as liquid membrane. The extractant CYANEX 923 is characterized by a high phenol selectivity and an extremely low solubility in the aqueous phase. The introduction of CYANEX 923 in the membrane composition decreases the extractant losses from the pores of the support.

The phenol separation and simultaneous concentration process has been checked. The influences of the initial concentration of phenol in the feed solution and sodium hydroxide in the stripping phase and the membrane composition on the separation rate have been investigated in a single-pass mode. The analysis of the membrane composition influence has been performed according to the steady-state mass transfer conservation equation and the associated boundary conditions, leading to the mass transfer parameters of the process     

活性炭吸附法处理麦麸膳食纤维废水的研究

采用活性炭吸附的方法来处理麦麸膳食纤维废水。实验结果表明,当活性炭的投入量为160 g/L,接触时间为20 m in,温度为55℃,pH值在小于5的条件下能有效处理该废水,CODC r的去除率最高达96.89%,BOD5的去除率最高达96.61%。     

微细纤维发展概况与趋势

介绍了微细纤维发展概况,包括生产工艺,纤维性能,最终用途以及当前的发展趋势。并对我国发展微细纤维提出建议.     

远红外丙纶的性能研究

系统测试了采用共混纺丝法研制出的远红外丙纶及织物的物理机械性能、远红外发射性能、保温性能、耐洗涤性能和抗菌性能，并对用远红外丙纶加工的护腿的医疗保健作用进行了临床检测。进而讨论了远红外丙纶及织物的医疗保健作用机理。     

导电聚苯胺复合纤维的研制

利用氧化聚合法，在室温、常压下快速将苯胺聚合在极性纤维表面，从而赋予纤维优良的导电性能，其表面电阻达到１０￣３Ω／ｃｍ。同时对导电性能的耐洗牢度进行了初步研究。