合成氢化松香乙酯的新工艺研究

以DRC为催化剂,在无溶剂条件下,通过氢化松香与乙醇的直接酯化反应合成氢化松香乙酯。探索了反应温度、催化剂用量、反应时间、物料配比等因素对反应酯化率的影响,确定最佳反应条件为:反应温度180℃,催化剂用量为原料氢化松香质量的6%,反应时间6h,醇与酸的摩尔比为3∶1。在最佳条件下酯化率达92.2%。还探讨了用阴离子交换树脂柱层析分离纯化氢化松香乙酯粗产物的方法。此外,利用红外光谱对氢化松香乙酯精制产物进行了表征;用GC-MS分别对氢化松香乙酯粗产物及其精制产物进行了定性和定量分析,比较了柱层析前后化学组成的变化。     

高性能环氧乙烯基酯树脂在车辆制造上的应用

介绍了几种特种环氧乙烯基酯树脂在不同类型车辆部件制造上的应用，阐述了高性能树脂基复合材料在车辆上的应用情况和发展趋势。     

乙烯基酯树脂耐低温性能研究

本文就乙烯基酯树脂在低温下的性能作一探讨。     

Synthesis,degradation, and drug delivery of cycloaliphatic poly(ester anhydride)s

The high melting point of poly(1,4‐cyclohexanedicarboxylic anhydride) [poly(CHDA)] is a disadvantage, in that it is intractable in the melting process of a drug delivery system. This report relates to diols introduced into the polyanhydride main chain to decrease its melting point. Various poly(ester anhydride)s containing ethylene glycol, 1,3‐propanediol, 1,4‐butanediol, or 1,6‐hexandiol [poly(CHDA–XDO)] were synthesized by the esterification reaction and melt polycondensation. FTIR, DSC, WAXD, and intrinsic viscosity of polymers were recorded and hydrolytic degradation, as well as in vitro drug delivery, was conducted. The results show that the samples are stable in an anhydrous environment at room temperature and degrade in water following a surface erosion mechanism. The degradation period of poly(CHDA–XDO) ranged from 130 to 320 h as a result of the different diols and amounts of XDO introduced. The in vitro drug delivery gave 130–350 h of stable delivery along with the typical surface erosion mechanism. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2509–2514, 2002     

Recent studies of self-condensation and co-condensation of melamine-formaldehyde resins; cure at low temperatures

Self-condensation: recent research on the chemical pathways by which alcoholated melamine-formaldehyde (MF) resins react with themselves and on the product structures is summarized. Model compound studies suggest that bridges are less stable than widely thought unless they are in hexahydro-1,3,5-triazine ring structures. In acyclic structures they are probably less stable than bridges. Co-condensation: studies of how the composition of MF resins influences the rates of reaction with poly(ol) co-reactant show that MF resins that contain very low levels of and/or functionality are quite reactive. Reactivities of a variety of poly(ester) and acrylic coreactants were studied. By combining reactive MF resins with reactive co-reactants one can formulate high solids enamels that cure by co-condensation in 30 min at 50 to 65 °C with 0.5 parts per hundred (phr) of p-toluenesulfonic acid (p-TSA) catalyst. Cure at 25 °C appears feasible with higher catalyst levels.     

A rapid test to measure performance,emission and wear of a diesel engine fueled with palm oil diesel

Results of performance, emission and tribological evaluations of palm oil methyl ester and its blends with conventional diesel in an automobile diesel engine test bed are presented. Polymerization and carbon deposits on the fuel injector were monitored. CO, CO₂, O₂, combustion efficiency and temperature of exhaust gases were also measured. Palm oil methyl ester and its blends have great potential as alternative diesel fuel. Performance and exhaust gas emission for palm oil methyl ester and its blends with conventional diesel are comparable with those of conventional diesel fuel. Palm oil methyl ester does not pose a severe environmental problem and will not deteriorate engine and bearing components.     

酚醛环氧乙烯酯树脂研究

本文以酚醛环氧树脂F-51与甲基丙烯酸合成出酚醛环氧乙烯酯树脂,并对此树脂的耐热性、耐化学溶剂性能进行了研究.     

N,N,N-三甲基-2,3-二(硬脂酰氧基)丙基氯化铵(CDESA)的生物降解性

采用活性环氧中间体失水甘油基三甲基氯化铵合成了一种阳离子双酯表面活性剂——N,N,N-三甲基-2,3-二(硬脂酰氧基)丙基氯化铵(CDESA),来代替传统的难降解的表面活性剂型柔软剂,如目前国内仍在大量使用的双十八烷基二甲基氯化铵(D1821)。对CDESA的好氧降解性能进行了研究:以天然环境中的生活沉降污泥作为微生物源,用河水稀释,经培养、驯化后用于测试降解时间和半衰期,并与D1821的好氧降解性能作了对比。结果表明,CDESA的半衰期为3 d,容易降解,而D1821半衰期为7 d,较难降解,CDESA生物降解性能优于D1821。     

Study on the structure and properties of cyanate ester/bentonite nanocomposites

Cyanate ester (CE)/bentonite (BT) nanocomposites were prepared by melt blending of CE with NH₄⁺‐BT. The nanostructure of CE/BT nanocomposites was studied by X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). It was found that partially intercalated and partially exfoliated structures coexisted in CE/BT nanocomposites containing 2.5 wt % BT with respect to that of bulk CE. Below 2.5 wt % BT content, a totally exfoliated and disordered structure was formed in the nanocomposites. The exfoliated BT enhanced the toughness of CE/BT nanocomposites. The impact strength showed a maximum of 7.1kJ/m² at 1 wt % BT, compared to 3.8kJ/m² of pure CE. Furthermore, results of thermogravimetric analysis (TGA) suggest that CE/BT nanocomposites have higher thermal stability. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 632–637, 2005     

基于动态硼酸酯键改性黄原胶的性能

基于苯硼酸聚合物可以与存在于黄原胶糖环单元结构中的伯、仲醇羟基通过硼酸酯键形成动态共价微交联结构的性质对黄原胶进行改性。以偶氮二异丁基脒二盐酸盐（AIBA）为引发剂，通过水相自由基聚合，制备了不同共聚比的丙烯酰胺（AM）、N-(3-二甲氨基丙基)丙烯酰胺（DMAPAM）和3-丙烯酰胺基苯硼酸（AMBB）的三元共聚物P(AM-co-DMAPAM-co-AMBB)。通过1H NMR、FTIR、元素分析和光散射对聚合物结构及相对分子质量进行了表征，并对其与黄原胶复配体系的增黏性、流变性、抗老化性及抗干扰性进行了评价。结果表明：P(AM-co-DMAPAM-co-AMBB)与黄原胶复配后对黄原胶溶液具有明显的增黏性，其中苯硼酸单体的摩尔比为1.0 mol%的聚合物对黄原胶溶液的增黏幅度达43.8%，在8074 mg/L的矿化水中增黏幅度高达56.4%，且复配体系具有良好的抗老化降解性，对乙二醇和1,3-丙二醇具有较强的抗干扰性。