棕刚玉粉中Al2O3含量分析方法的探讨

对耐火材料——棕刚玉粉的质量分析控制，提出了用实用性的检测方法测定其Al2O3含量。通过与国家标准分析方法的对比试验，证实快速实用分析方法测定棕刚玉粉中Al2O3含量是可行的。     

借鉴英国经验完善中国土地产权流转

本文在简要介绍中、英两国土地产权制度和土地产权流转的基础上，分析了我国土地产权流转过程中出现的问题，如征地过程中的赔偿过低且不完善、国有土地拆迁补偿不公以及补偿的分配方式不公平等问题。由于英国在土地制度方面与中国的相似性，文章借鉴英国土地补偿中的补偿金与改善金相结合原则、土地使用权的租赁行为以及开发收益回馈社会的方法，为完善和健全我国的土地产权流转机制提出措施和建议。     

Behavioral and subjective effects of D-amphetamine and modafinil in healthy adults.

Modafinil is indicated for the management of excessive daytime sleepiness; however, recent studies have examined a broad range of potential uses. Given that clinical uses of modafinil may be expanding, this study compared modafinil and d-amphetamine effects on subjective and performance measures. Across 11 sessions, 11 healthy adults were tested after oral doses of placebo (5 sessions), modafinil (1.75 mg/kg, 3.50 mg/kg, or 7.00 mg/kg), and d-amphetamine (0.035 mg/kg, 0.070 mg/kg, 0.140 mg/kg) under double-blind, randomized conditions. Assessments of cognitive performance and subjective effects were completed before drug administration, 30 min after drug administration, and at hourly intervals after drug administration for 5 hr. Modafinil increased ratings on the Amphetamine and Morphine Benzedrine Group scales of the Addiction Research Center Inventory (ARCI) and increased ratings on the Vigor and Total Positive scales of the Profile of Mood States. d-Amphetamine increased visual analog ratings of feeling stimulated and liking the drug and increased ratings on the Morphine Benzedrine Group scale of the ARCI. Both medications significantly reduced visual analog scale ratings of feeling sleepy, and modafinil decreased ratings on the ARCI Pentobarbital-Chlorpromazine-Alcohol Group scale. Both medications sustained performance that deteriorated across time on the Sternberg Number Recognition Test. Modafinil also enhanced performance rate on the Digit-Symbol Substitution Task above baseline levels and increased response rate on the Repeated Acquisition of Response Sequences Task. These results suggest that modafinil engenders alerting effects and increases performance in healthy non-sleep-deprived individuals comparable with that of d-amphetamine. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Factor structure of the SOCRATES in a clinical sample of adolescents.

This study investigated the Stages of Change Readiness and Treatment Eagerness Scale (SOCRATES: W. R. Miller & J. S. Tonigan, 1996) in adolescents presenting for treatment of alcohol use disorder (AUD). The participants were 80 males and 43 females (mean age=16.8 years) who presented for AUD treatment (95.1% outpatient, 4.9% inpatient). Participants completed assessments at baseline and 1 year and provided information on alcohol use and related variables monthly between these 2 assessments. Principal-components and confirmatory factor analyses of the baseline SOCRATES identified 2 factors, Taking Steps and Recognition, which showed good internal consistency and concurrent and predictive evidence of validity. The results were interpreted as supporting the use of the SOCRATES with clinical samples of adolescents. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Integrated development of CFRP structures for a topless high performance vehicle

When modern saloon cars are re-engineered as convertibles (or roadsters) it is typical for them to lose 50% or more of the body’s torsional rigidity. Consequently the vehicles rarely handle quite as crisply, nor do they ride as well as the coupes from which they derived. This paper highlights the fundamental contributions of advanced composites in achieving the desired value of handling of the Murcièlago Roadster without penalizing the overall weight of the vehicle. To compensate for the absence of the roof structure, the vehicle was strongly redesigned by introducing new structural members and reinforcing existing critical components. A new all-carbon/epoxy composite sub-frame, which spans the entire engine bay, is comprised of elliptical tubular members, and it is the first of its kind in a production vehicle. Engineering of the sub-frame, from preliminary design to manufacturing decisions, is the focus of this paper, and is achieved through a Building Block approach that sets the program within the Integrated Product Development (IPD) strategy that the Advanced Composites Division of Automobili Lamborghini S.p.A. employs for its technology demonstrators. The strategy consists in a concurrent analytical and experimental development of the product, from the initial conceptual design and coupon testing, through the stages of element and subcomponent engineering, to final component manufacturing.     

Describing metal surfaces and nanostructures with orbital-free density functional theory

Orbital-free density functional theory (OF-DFT) can be made to scale linearly with sample size, allowing thousands of atoms to be treated explicitly with quantum mechanics. State-of-the-art kinetic energy density functionals and ion–electron pseudopotentials are used to obtain accurate structural property predictions for nanoparticles, nanowires, extended surfaces, and nanoindentation of simple metals.     

Optimal control of accelerator concentration for resin transfer molding process

Resin cure following mold filling is an essential element in resin transfer molding. To fabricate a composite part with high dimensional stability and minimize residual stress, uniform resin cure should be achieved. This study considers a three-part resin system composed of epoxy, hardener and accelerator. The cure kinetics can be controlled by the accelerator concentration at the injection gate. A numerical method that can predict degree of cure distribution based on accelerator concentration at the gate was proposed. The degree of cure distribution is obtained by solving the resin flow, heat transfer, accelerator concentration and cure problems sequentially. Utilizing this numerical method, an optimal variation of accelerator concentration during mold filling was sought by solving a constrained optimization problem. The effect of accelerator control on degree of cure distribution was investigated and its validity was examined for two different geometries.     

Excel在大学物理实验中的应用

利用Excel的强大功能，对实验数据进行处理、分析，对实验过程及实验结果的监控。     

Effect of pH on the Crystallization of Homogeneously Precipitated Nanosized PZT Powder

Nanosized lead zirconate titanate (PZT) powder with Zr:Ti ratio in the morphotropic phase boundary region was synthesized by homogeneous precipitation of metal ions. The powder precipitated at 90°C and at pH 6.7 resulted single-phase perovskite lead zirconate titanate powder when calcined at 550°C and above for 4 hours in air. The solution pH and the precipitation temperature strongly affect the composition of the calcined powder. The results obtained by structural characterization of homogeneously precipitated powder were compared with that obtained from the conventional precipitation method using ammonia in terms of crystallization, homogeneity, and microstructure. The homogeneously precipitated powder showed smaller particle size, minimum agglomeration and uniform shape on calcination and annealing. Powdered samples that precipitated by homogeneous precipitation crystallized directly to perovskite PZT, without any intermediate pyrochlore phase formation. In contrast, the NH₃ precipitated powder converted to perovskite PZT via metastable pyrochlore and it showed phase segregation upon annealing at higher temperatures. The reaction kinetics has been studied by X-ray diffraction, differential thermal analysis, and differential scanning calorimetry.     

Surface Hardening of High-Strength Low Alloy Steels (HSLA) Dual-Phase Steels by Ball Burnishing Using Factorial Design

Burnishing is used increasingly as a finishing operation which gives additional advantages such as increased hardness, fatigue strength, and wear resistance. Experimental work based on 3⁴ factorial design was carried out to establish the effects of ball burnishing parameters on the surface hardness of high-strength low alloy steels (HSLA) dual-phase (DP) steel specimens. Statistical analysis of the results shows that the speed, feed, lubricant and ball diameter have significant effect on surface hardness.