埃及Ain Sukhna Ezz带钢厂的电弧炉

埃及Ain Sukhna Ezz带钢厂的电弧炉是达涅利公司建造的最大的电弧炉之一,由于可选用多种入炉原料,采用最优化熔炼和精炼方法,可在电弧炉上以转炉生产成本生产转炉优质钢种.     

Electron microscope studies of InxGav1−xAs/GaAs/Si grown by metalorganic chemical vapor deposition

The microstructure of In_xGa_1−xAs/GaAs (5 nm/5 nm, x < 0 to 1.0), as grown by a metalorganic chemical vapor deposition two-step growth technique on Si(100) at 450‡C, and subsequently annealed at 750‡C, is investigated using plan-view and cross-sectional transmission electron microscopy. The variations in resultant island morphology and strain as a function of the In content were examined through the comparison of the misfit dislocation arrays and moirés observed. The results are discussed in relation to the ways in which the island relaxation process changes for high In content.     

Defensive allomones in three species ofHypselodoris (gastropoda: Nudibranchia) from the Cantabrian sea

ThreeHypselodoris species,H. villafranca, H. cantabrica, and H. tricolor, have been studied in order to further investigate the defensive strategies of Chromodorididae mollusks from Iberian coasts. All animals possess large amounts of furanosesquiterpenoids, probably derived from their diet of sponges. The products are transferred and stored in specific sites of the mantle (mantle dermal formations, MDFs) to be used as chemical deterrents against predators. Chemical analysis of CantabrianHypselodoris species has led to the characterization of eight sesquiterpenoids. Among these, six have been found previously in both sponges and nudibranchs, while two are new natural products.Hypselodoris species cooccurring in the same area contained comparable mixtures of sesquiterpenoids. However, two populations ofH. cantabrica from different sites of the Cantabrian sea showed different metabolic patterns. All sesquiterpenoids induce feeding deterrence inCarassius auratus and two are also toxic toGambusia affinis.     

流程模拟中分解与切断的计算机处理方法探讨

探讨在化工过程模拟计算中对大系统分解及排出单元模拟优先顺序，找出切断流的最佳切断位置的一种新方法。     

石化行业自动化控制仪表常见故障分析及其处理

介绍化工生产过程中仪表故障及其处理措施。     

电导法测定乙酸解离常数实验数据处理软件设计

介绍了用电导法测定乙酸解离常数的实验原理和步骤,给出了用计算机对电导法测定乙酸解离常数的实验数据进行处理的软件设计方法,同时给出了用Visual FoxPro 6.0编写电导法测定乙酸解离常数的处理软件的基本结构和部分程序代码。     

关于新建炉EDTA低浓度清洗的探讨

阐述了EDTA清洗锅炉的基本原理,低浓度清洗新建炉的工艺、方法及控制要点,EDTA低浓度清洗与协调EDTA清洗的经济性比较,为新建炉EDTA低浓度清洗探索了方向。     

基于软测量的化工精馏过程推断控制策略

针对化工精馏过程产品成分无法在线检测及其用温度间接控制产品成分的常规控制策略存在着控制精度低的问题,提出基于软测量的精馏过程成分非线性串级推断控制策略。该控制策略首先提出核岭回归的实时软测量方法,即利用满足Mercer条件的核函数改进线性岭回归算法,实现精馏过程产品成分的在线检测;然后在此基础上,提出一种新的非线性串级推断控制策略,即副环采用常规的温度间接控制,主环采用基于核岭回归软测量的推断控制策略。通过Mejedell等建立的精馏塔动态模型分别对单端和双端成分非线性串级推断控制策略性能进行分析,仿真结果表明,与传统控制方案比较,新控制策略的控制质量有了较大提高,控制结构简单,易于实施。     

温度对Ni—P化学镀层结合力影响的研究

用弯曲法、划痕法研究了镀后加热温度对Ni-P化学镀层结合力的影响,结果表明:镀后退火温度越高,镀层结合力越好,但温度过高时,镀层硬度将下降。用金相观察及电子探针分析,探讨了镀后退火温度影响结合力的机理。结果指出:退火时将在镀层和基体界面上发生Ni与Fe的互扩散,形成Ni-Fe合金扩散层,从而提高了结合力。为了能在保证镀层硬度的前提下提高结合力,本文提出了二次镀覆的设想,获得较好试验结果。     

CVD反应器传输过程的三维数学模型

提出了一个同时表示CVD过程的气体流动、温度分布和物质传输的三维数学模型。应用这个模型预报了在含有SiCl_4的氢气流中沉积出Si的锥台式反应器中的速度场、温度场和浓度场。所得的结果有助于增进对这类反应器中的传输过程的认识,模型亦可用于设计参数的最优化,诸如入口流量,锥台倾角等。