高纯钨中杂质元素的化学光谱法测定

采用以一定比例的ＨＮＯ３和ＨＣｌ为介质，使钨沉淀成钨酸与杂质分离，然后用碳粉吸附杂质再进行光谱测定的方法，对高纯钨（包括金属钨、三氧化钨、钨酸、钨酸铵）中１５个杂质元素Ｆｅ、Ｎｉ、Ｃｕ、Ｍｎ、Ａｌ、Ｖ、Ｃｒ、Ｃｏ、Ｃａ、Ｍｓ、Ｐｂ、Ｓｎ、Ｂｉ、Ｃｄ、Ｂｅ进行了测定，取得了理想的结果，测定下限可达（０．１～０．５）×１０（－６）。     

化工过程熵增指数及其在磷复肥清洁生产评价中的应用

从热力学第二定律出发, 指出清洁生产的热力学本质是控制物质由有序结构向无序转化并从中获取最大效益, 其优劣可由过程熵增反映。 引用复杂体系非平衡定态过程最小熵产生原理,推导出依据与外界交换的物流和热流信息定量计算化工复杂系统过程熵增的方法, 并定义过程熵增指数ζ 。 评价了化工过程对环境热力学状态的综合影响。选择以硫和以氨为载能原料的磷复肥工艺为例进行了计算和对比,其过程熵增指数分别为6.753和4.571,反映出载能原料硫作为废物排放对环境热力学状态产生更大的影响。     

化学气相沉积法制备碳化铬薄膜的研究

以三（2,2,6,6-四甲基-3,5-庚二酮）化铬为前驱体,采用化学气相沉积（CVD）法在氧化铝（Al₂O₃）陶瓷基板上制备碳化铬（Cr₃C₂）薄膜,其中沉积温度为723 K至923 K,沉积时间为1 200 s。研究了不同沉积温度对Cr₃C₂薄膜的相组成、择优取向、宏观表面、微观结构及电学性能的影响。结果表明,在723 K至923 K下制备得到具有高度（130）择优取向的Cr₃C₂薄膜。随着沉积温度的升高,Cr₃C₂薄膜表面先由光滑变粗糙,后逐渐变光滑;薄膜晶粒呈椭球型生长;薄膜的厚度先增加后减小,从而导致电阻先减小后增大。在798 K时制备得到厚度最大且电阻最小的（130）择优取向的最佳Cr₃C₂薄膜。同时,在实验条件下Cr₃C₂薄膜表面存在少量的碳和Cr₂O₃。     

碱性阻挡层抛光液中ULK介质抛光性能的研究

研究了化学机械抛光(CMP)过程中抛光液的SiO₂磨料质量分数和表面活性剂对多孔SiOCH薄膜(ULK介质)介电常数(k)及抛光速率的影响。所用抛光液(pH=10)主要由0%~4%(质量分数,下同)SiO₂、0.075%H₂O₂、1%邻苯二甲酸氢钾和不同质量浓度的表面活性剂组成,其中表面活性剂为非离子表面活性剂脂肪醇聚氧乙烯醚(AEO-9和AEO-15)、阴离子表面活性剂十二烷基硫酸铵(ADS)和两亲性非离子表面活性剂辛基苯酚聚氧乙烯醚(OP-50)。结果表明,磨料质量分数的增大会使ULK介质的去除速率和k值都增大。聚醚类表面活性剂都能在CMP过程中很好地保护ULK介质表面,降低其去除速率,OP-50的效果尤其好。当采用2%SiO₂+0.075%H₂O₂+1%KHP+200 mg/L OP-50的抛光液进行CMP时,ULK介质的去除速率为5.2 nm/min,k值增幅低于2%,Cu和Co的去除速率基本不变。     

特殊工业粉尘地区复合绝缘子腐蚀失效过程研究

硅橡胶复合绝缘子因其优异的憎水性及憎水迁移性而具备较好的防污闪能力,往往作为应对污闪事故的首选方案。但在部分特殊工业粉尘地区,复合绝缘子在短时间运行后会出现爬电及蚀损现象,并发展为绝缘失效。为研究特殊工业粉尘地区复合绝缘子的腐蚀失效过程,测试了某特殊工业园区内运行的复合绝缘子的表面污秽度及污秽成分、污闪电压梯度、憎水性能及微观性能,并分析了其腐蚀失效过程。主要结论如下:绝缘子表面等值盐密为0.1~0.2 mg/cm²,其污秽成分与化工污源类似;存在自然污秽时绝缘子表面憎水性良好,但其憎水性的减弱、恢复及迁移特性均不能满足运行要求;绝缘失效的起因是电晕放电导致憎水性降低,进而导致伞裙电蚀损,最后发展为绝缘失效。     

Robust Superhydrophobic Fabric for Durability,Self-Cleaning,and Oil/Water Separation via Thiol–Acrylate Polymerization

In recent years, highly efficient oil/water separation materials have brought much attention. It requests superhydrophobic surfaces with a rapid and facile separation process, excellent durability, and large-scale fabrication. Herein, a facile vapor-liquid sol-gel, and free radical polymerization reaction method to prepare the durable and robust superhydrophobic cotton fabric is proposed. Moreover, the fabric can be used for highly efficient and various oil/water separation. It is prepared via a simple two-step process, including a vapor-liquid sol-gel process to deposit with thiols particles, and then followed a free radical polymerization reaction to graft 2,2,3,4,4,4-hexafluorobutyl methacrylate. Scanning electron microscopy and Fourier transform infrared spectrometry prove that the rough structures are generated from the hydrolysis condensation reaction between tetraethyl orthosilicate and 3-mercaptopropyltriethoxysilane. As a result, the synthetic chemical composition provided by the natural fabric and silica nanoparticles synergistically construct a superhydrophobic surface with water contact angles and shedding angle of 158° and 9°, respectively. Additionally, the treated fabric exhibits excellent chemical resistance and self-cleaning ability. Remarkably, the fabric still retains superhydrophobic and excellent mechanical robustness after 30 cycles of various oil/water separation. In summary, the resultant fabrics with excellent chemical resistance, remarkable mechanical robustness, and versatile separation abilities have potential applications in various oil/water separations.     

Gurum Seeds: A Potential Source of Edible Oil

Cucurbitaceae family seeds are mostly discarded as agro-industrial wastes. Gurum (Citrullus lanatus var. colocynthoide) is an underutilized wild cucurbit plant, closely related to desert watermelon, which is grown abundantly in some African countries. Gurum seeds can play a significant role in health and nutrition due to their high oil content. This review describes the nutritional composition of gurum seeds and their oil profile. Gurum seeds are a good source of oil (27–35.5%), fiber (26–31%), crude protein (15–18%), and carbohydrates (14–17%). Gurum seeds oil is extracted by supercritical CO₂ (SFE), screw press, and solvent extraction techniques. The gurum seeds oil is composed of unsaturated fatty acids with a high proportion of linoleic acid (C18:2) and oleic acid (C18:1). Gurum seeds oil contains various bioactive compounds, such as tocopherols, phytosterols, and polyphenols. It is reported that solvent extraction gives a higher yield than the screw press and SFE, but the SFE is preferred due to safety issues. More studies are required for producing better quality gurum seeds oil by using novel extraction techniques that can increase oil yield.     

Chemical Labeling of Protein 4′-Phosphopantetheinylation

Nature uses a diverse array of protein post-translational modifications (PTMs) to regulate protein structure, activity, localization, and function. Among them, protein 4′-phosphopantetheinylation derived from coenzyme A (CoA) is an essential PTM for the biosynthesis of fatty acids, polyketides, and nonribosomal peptides in prokaryotes and eukaryotes. To explore its functions, various chemical probes mimicking the natural structure of 4′-phosphopantetheinylation have been developed. In this minireview, we summarize these chemical probes and describe their applications in direct and metabolic labeling of proteins in bacterial and mammalian cells.     

粉煤灰的活性激发与机理研究进展

粉煤灰是燃煤电厂中煤粉燃烧后的固体废弃物,其日益累积不但会占用大量土地资源,还会破坏原有的自然环境,造成严重污染,近年来粉煤灰的处理和资源化利用受到广泛关注。激发粉煤灰的潜在活性是提高粉煤灰综合利用率的关键。对粉煤灰的物理活性和化学活性来源进行了介绍,并对粉煤灰活性的物理激发、水热激发及化学激发技术与激发机理进行了综述,为后续粉煤灰的活化研究和大规模利用提供了参考。不同手段均能激发粉煤灰活性,但采用单一手段激发时存在活化成本高、激发程度低等问题。未来粉煤灰激发技术将朝着多种手段并用的方向发展。     

NiFeAlO4载氧体制备及煤化学链燃烧反应特性

铁基载氧体是一种具有工业应用前景的载氧体,但存在氧利用率低、在高温下易烧结等问题。虽可通过制备双金属复合载氧体或添加惰性组分改进其性能,但均存在一定缺陷。若将活性组分和惰性材料融入到一个晶体结构制备尖晶石结构载氧体,则可实现利用双金属协同作用提高载氧体活性的同时,利用Al3+提高载氧体的稳定性。采用共沉淀法和溶胶凝胶法制备了具有尖晶石结构的NiFeAlO₄载氧体,考察了制备方法、载氧体与煤质量比对NiFeAlO₄载氧体化学链燃烧特性和循环稳定性的影响,并分析了载氧体对煤转化过程的作用。结果表明,溶胶凝胶法制备的NiFeAlO₄载氧体具有更好的反应性,载氧体与煤质量比为20∶1时,碳转化率为86.7%,远高于煤单独热解时的碳转化率(34%),此时CO₂体积分数为93.6%。对反应前后NiFeAlO₄载氧体晶相结构和形貌进行分析,表明循环过程中经“还原-氧化”后生成的NiO和载氧体颗粒团聚是导致载氧体活性下降的主要原因。相较于载热作用,NiFeAlO₄载氧体在煤化学链燃烧中主要起供氧作用,其不仅会促进挥发分向煤气的转化,且NiFeAlO₄载氧体与焦炭之间也存在固-固反应,利于更多CO₂的生成。