Mass loss and flammability of insulation materials used in sandwich panels during the pre‐flashover phase of fire

Nowadays, buildings contain more and more synthetic insulation materials in order to meet the increasing energy‐performance demands. These synthetic insulation materials have a different response to fire. In this study, the mass loss and flammability limits of different sandwich panels and their cores (polyurethane (PUR), polyisocyanurate (PIR) and stone wool) are studied separately by using a specially designed furnace. Expanded polystyrene and extruded polystyrene are tested on their cores only. The research has shown that the actual mass loss of synthetic and stone wool‐based cores is comparable up to 300 °C. From 300 °C onwards, the mass loss of PUR panels is significant higher. The mass losses up to 350 °C are 7%, 29% and 83% for stone wool, PIR and PUR respectively, for the influenced area. Furthermore, delamination can be observed at exposure to temperatures above 250 °C for the synthetic and 350 °C for the mineral wool panels. Delamination occurs due to the degradation of the resin between core and metal panels and the gasification of the (PUR) core. The lower flammability limits have been established experimentally at 9.2% m/m (PUR) and 3.1% m/m (PS). For PUR, an upper limit of 74% was found. For PIR and mineral wool, no flammability limits could be established. Copyright © 2017 John Wiley & Sons, Ltd.     

经典园林实例的演变--浅析杭州动物园金鱼展区的改造

本文以理论结合实例，阐述了经典园林景观的演变过程。通过对现状的考察、分析，得出了园林景观存在的不足，并提出了相应的解决方案。说明了要在保留其原有特色的基础上进行科学、合理地改造，进而完善其景观和功能的需求。     

Study of the solubility of Pb,Bi and Sn in aluminum by mixed CALPHAD/DFT methods: Applicability to aluminum machining alloys

The aim of this work is a formulation of a thermodynamic model for the development of new aluminum machining alloys. The three additives Bi, Pb and Sn have proven to help machining. Hence, a review of the literature showed that the liquid phase equilibria and thermodynamic data for the three binary systems Al-Bi, Al-Pb and Al-Sn is very thorough but the limited information for the FCC solution required the use of Density Functional Theory (DFT) to predict thermodynamic data. The partial heat of mixing of these three machining additives in Al(FCC) are obtained and the results helped to improve the thermodynamic model using the CALPHAD method. It was shown that for all three binary systems, the thermodynamic data obtained at three fixed compositions and that obtained for a very dilute solution gave different enthalpy curves. The thermodynamic model was used to compute the ternary systems Al-Bi-Pb, Al-Bi-Sn and Al-Pb-Sn and small adjustable parameters were added to reproduce the literature data.     

Research to reality: a critical review of the validity of various criteria for the prevention of occupationally induced low back pain disability

Criteria have been suggested to reduce the incidence, or severity of low back pain disability. Five underlying theories for such criteria have been identified in the literature, and a critical review of the validity of these criteria has been carried out. Despite attributions elsewhere, peer-reviewed validation of the various criteria range from modest to nil. The need for a validation criterion for use in workplace design in order to reduce low back pain disability, or severity, is identified and the need for an international protocol to allow cross-study validation of present and future criteria is suggested.     

Statistical Programs for High Speed Computers

Two objectives of much experimentation in science and engineering are (i) to establish the form of an adequate mathematical model for the system being investigated and (ii) to obtain precise estimates of the model parameters. In the past, statistical design procedures have been proposed for tackling either one of these problems separately. Investigators, however, frequently want to perform experiments which will shed light on both questions simultaneously. In this paper, therefore, we present a design criterion which takes both objectives into account. The basic design strategy is to emphasize model discrimination when there is considerable doubt as to which model is best and gradually shifting the emphasis to parameter estimation as experimentation progresses and discrimination is accomplished. It is assumed that experiments can be performed sequentially. The use of the design criterion is illustrated with an example.     

A 1916 World War I notebook of Luigi Sacco

Letters, notes, and above all an original notebook by Luigi Sacco dated 1916 have shed new light on the establishment and development of the “Ufficio (or Reparto) Crittografico” of the Italian Army Headquarters in World War I. Three decrypted messages, unpublished until now, are included with Sacco’s comments.     

A cross-validation of the NIOSH limits for manual lifting

The psychophysical, biomechanical, and physiological criteria used in establishing the NIOSH limits for manual lifting were cross-validated against the data published by different researchers in the subject literature. Assessment of the 1991 NIOSH lifting equation indicated that: (1) NIOSH-based limits are significantly different from the psychophysical limits in the (i) low and high frequencies of lift, and (ii) small and large horizontal distances; (2) NIOSH limits are highly correlated with the data of Snook and Ciriello (1991) in the low frequency range, with the Recommended Weight Limit (RWL) protecting about 85% of the female population and 95% of the male population; (3) the 3·4 kN limit for compression on the lumbosacral joint cannot protect the majority of the worker population on the basis of damage load concept; and (4) energy expenditure limits used in development of the RWL index can be sustained by 57 to 99% of worker population when compared to the physiological limits based on previous fatigue studies. Results of the cross-validation for psychophysical criterion confirmed the validity of assumptions made in the 1991 NIOSH revised lifting equation. However, the results of cross-validation for the biomechanical and physiological criteria were not in total agreement with the 1991 NIOSH model     

Ermittlung von Verfahrensgrenzen für das Fügen durch Knickbauchen anhand des Werkstoffes E235+N

Through a systematic approach and the consistent comparison of the results between experimental and numerical investigations, a deep understanding of the bulging mechanisms has been first developed. From these investigations process limitations were derived and presented in the form of a working diagram for the material E235+N. With regard to a wide industrial use of upset bulging as a joining technology, a technologically, productively as well as economically appropriate method could be developed and validated by means of practical and numerical experiments.     

Confidence limits for Weibull parameters estimated using linear least squares analysis

Confidence limits (at selected levels of 68.27%, 90%, 95% and 99%) for unbiased estimation of Weibull parameters obtained using linear least squares (LLS) analysis were investigated in this paper. A Monte Carlo procedure was used to obtain probability distributions for unbiased estimates of Weibull modulus, m, and Weibull scale parameter, S_o, as a function of total specimen number, N (10 ≤ N ≤ 200), and m (1 ≤ m ≤ 25). Inspection of the probability distributions indicated that confidence limits for m depended only on N whereas those for S_o depended on both N and m. Whilst the determination of confidence limits for m proved to be relatively straightforward, the respective values for S_o were obtained by fitting an empirical equation to the S_o probability distributions approximated by a Gaussian curve. Example values of m and S_o confidence limits for selected N have been presented in this work.     

An Evaluation of Different Controllers Based on the Network Frequency Maintenance Strategy for a Large and Multi-control-area Interconnected Power System

Abstract—Maintaining the network frequency at its nominal value due to the load changes is one of the most important issues in the control and operation schedule of a large and multi-area interconnected power system. For the effective control solution, two types of tie-line bias control strategy-based controllers have been applied, i.e., classical and improved controllers. The classical controllers using conventional regulators, including integral, proportional–integral and proportional-integral-derivative, have achieved initial control results to bring the steady state back to the network. However, due to the very poor control features (e.g., large overshoots and long settling times), they need to be replaced with improved controllers, such as fuzzy logic and artificial neural network. To obtain an entire evaluation of the application of different load-frequency controllers, a five-control-area interconnected power system was built as a typical case study. Three improved controllers using proportional-plus-integral-based fuzzy logic and artificial neural network-based non-linear autoregressive moving average (NARMA-L2) architectures as well as their hybrid combination will also be investigated in this study. Simulation results obtained reveal that the improved controllers have obtained smaller overshoots (from 13.95 to 84.18%) and shorter settling times (from 19.91 to 65.71%) compared with the classical controllers.