基于支持向量机的红细胞彩色图像分割

对红细胞进行精确的分割并统计各类参数在临床医学中有着重要的意义,但现有经典算法很难实现自动分割并获得较高准确率。红细胞的分割主要有两个难点：一是红细胞的目标提取;二是重叠红细胞的分割。本文首先利用SVM对原始图像进行红细胞提取,把原始细胞分割成红细胞和背景两类目标区域,然后对红细胞区域进行重叠分割（本文中使用改进距离标记的分水岭算法）,最终得到各个红细胞的统计数据。为获得最佳的分割效果,本文通过实验对核函数、支持向量类型及相关参数进行了详细的比较和分析。实验结果表明,该算法能有效、快捷、准确、全自动的实现     

特殊构造砖烟囱定向爆破拆除

介绍了定向控制爆破技术拆除一座烟囱、水塔的结合体,拟爆结构物地坪以上27 m处设置钢筋混凝土结构水箱,致使重心高于一般烟囱,其外壁采用ф12 mm钢筋网箍和60 mm厚混凝土进行加固。周边环境复杂,距高压配电房仅1.4 m,为避免地坪处+0.5 m烟道口对定向的影响,将爆破切口位置提高到+3.0 m处;为减小触地振动、防止倾倒过程中出现后座,采用梯形切口,爆破切口长度取其周长62%,爆破切口高度取1.4 m。为克服烟囱外壁加固层和圆拱墙体钻凿深度不准确的影响,同排相邻炮孔采用一深、一浅的布置方式,其炮眼深度差值2~3 cm,装药结构应用正、反向起爆综合技术。采用开挖减震沟、设置缓冲带控制爆破振动等措施,爆破效果理想,保证了邻近建筑物及设施安全。     

Alkylation of phenol with 1-propanol and 2-propanol over catalysts derived from hydrotalcite-like anionic clays

Vapour phase alkylation of phenol with 1-propanol and 2-propanol was carried out in a fixed-bed flow reactor over calcined magnesium aluminium hydrotalcites (MgAl-CHT) with Mg/Al atomic ratios 2, 3 and 4. MgAl 3.0-CHT showed higher phenol conversion (80% at 350C, in the alkylation of phenol with 1-propanol. Both O- and C-alkylations were found to be taking place without any skeletal isomerization of the propyl moiety, suggesting an S_N2 type mechanism. Isomorphous substitution of Mg²⁺ by Cu²⁺ or Ni²⁺ in the hydrotalcite framework resulted in the predominant C-alkylation to give 2-n-propylphenol (60–70%) with nearly 40–50% phenol conversion at 350C. When 2-propanol was used as an alkylating agent, the phenol conversion decreased over all these catalysts and the alkylation was noticed exclusively at C-centers. Comparison of the product selectivity at constant phenol conversion revealed that CuAl 3.0-CHT is more selective for 2-n-propylphenol and 2-isopropylphenol in the reaction of phenol with 1-propanol and 2-propanol respectively. The participation of a pair of acid-base sites in the calcined hydrotalcites for the alkylation reaction has been proposed. The acid-base properties of these catalysts have been examined by the decomposition of cyclohexanol as a test reaction. Analysis of the spent catalysts revealed that Cu²⁺ in CuO gets reduced into Cu¹⁺ and metallic copper during the reaction in the case of CuAl-CHT, while MgO and NiO phases of MgAl-CHT and NiAl-CHT are retained.     

高密泥老虎

泥老虎是高密最有特色的民间艺术品,经过几百年的流传保持着它独特的艺术面貌,有着它独特的制作工艺,也是研究高密地区风土人情的重要资料。所以我们应该加强对它的认识与保护,促进它的传承与发展。     

无锡惠山泥人的造型特征研究

无锡惠山泥人历史悠久,造型优美传神,是我国民间工艺的精粹。论文通过对无锡惠山泥人的造型特征进行分析,总结出其造型、色彩、及构图上的规律,以此为实例分析推动传统工艺文化的保护和发展。     

石墨粒度对低炭镁炭砖性能的影响

以电熔镁砂和4种粒度(≤0.149mm、 ≤0.074mm、≤0.044mm和≤0.01mm)的天然鳞片 石墨为主原料,在石墨含量为4%的条件下,研究了 石墨粒度对低炭镁炭砖的物理性能、抗氧化性和热震 稳定性的影响。结果表明:用细石墨取代较粗石墨 (粒度≤0.149mm)制成的镁炭砖,其物理性能、抗氧 化性和热震稳定性都有了明显的改善,且都以加入粒 度≤0.074mm石墨的效果最好。其原因是细石墨的 加入改善了镁炭砖的基质结构。石　墨     

利用铝矾土制备钛酸铝陶瓷

钛酸铝陶瓷是集低膨胀系数和高熔点为一体的新型陶瓷材料,传统钛酸铝的合成采用工业纯的氧化铝和二氧化钛为原料,生产成本较高。本文采用廉价的高铝矾土取代Al2O3制备钛酸铝陶瓷,实验分别取了三种铝钛比,通过性能测试,确定Al2O3:TiO2=1:0.90可制得综合性能较佳的Al2TiO5陶瓷,此时α=2.05×10-6℃-1,抗折强度σ=35Mpa,热震稳定性达到32次。     

电石渣综合利用生产砌块

介绍了江苏徐州北方氯碱集团有限公司采用电石法PVC生产过程中产生的电石渣废弃物生产建筑用砌块的工艺路线,分析了这种砌块的特性及发展前景。     

Adsorption isotherms of pigments from alkali-refined vegetable oils with clay minerals

Adsorption isotherms of pigments from alkali-refined oils (rapeseed, soybean, wheatgerm, safflower, corn, cottonseed and sunflower) were measured to investigate the applicability of the Langmuir and Freundlich equations and to elucidate the adsorption characteristics of pigments on sepiolites and standard activated clay. The Freundlich equation was more applicable to the experimental adsorption isotherms. The equilibrium amount adsorbed, acidity, pore size distribution and inflection of the Freundlich isotherms could be explained by assuming that pigments were adsorbed on the stronger acid sites in smaller pores at low concentration, and then in the larger ones when the concentration increased. The amount adsorbed increased with a rise in adsorption temperatures from 70 to 110°C, and the heat of adsorption was below 10 kcal/mol. The results indicate that pigments were physically adsorbed on the acid sites activated at higher adsorption temperatures.     

大直径钢管桩打桩振动对粘土土阻力的影响

随着海洋平台上部结构的增大,大直径超长的钢管桩越来越多的被应用于实际工程中.要想对桩的可打入性进行准确预测,首先要对打桩冲击振动对周围土体所造成的影响有准确的评价.为了对打桩过程中的土阻力作出准确分析,根据渤海海域36根桩的打桩记录,对其中粘性土土层的打桩记录进行了反分析,总结了打桩过程中粘土层中土阻力的变化特点,分析了这些特点产生的原因.同时利用实测数据回归得到粘土层强度衰减的规律,提出了进行打桩分析时粘土层计算参数选取的方法,并通过一个实际工程对此进行了验证.分析结果显示,粘土层在打桩过程受动力效应的影响较大,其土性参数会随着捶击数的增加而降低,采用回归结果对打桩预测可以取得较好的结果.