A pair of parallel differential magnetic‐field probes with high measurement accuracy and high electric‐field suppression ratio

Magnetic‐field probes can be used for electromagnetic interference measurement of high‐speed circuits. The main magnetic probe performance includes sensitivity, spatial resolution, electric‐field suppression ratio (EFSR), and measurement accuracy. In this article, a pair of differential magnetic‐field probes is proposed to improve measurement accuracy without reducing sensitivity. The proposed differential probes consist of two asymmetric loop probes, which are designed in the same plane and separated by a row of periodic vias. The proposed differential probes are fabricated under PCB process. High accuracy can be achieved by measuring difference between outputs of the two probes. In addition, EFSR can be improved by size optimization of the differential magnetic‐field probes. Simulation and measurement results show the operating bandwidth is from 100 MHz to 12 GHz, the measurement error is 3.4% and the EFSR is about 40 dB. The proposed probes have higher measurement accuracy and higher EFSR than the conventional single probe, and larger operation bandwidth than the stacked differential probes.     

一种使用帧间差值的图像传感器片上视频压缩算法

为了减少图像传感器视频数据的输出,提出了一种通过编码相邻两帧之间差值的无损视频压缩算法.算法首先将基于差分脉冲编码调制原理的差分操作在模拟域实现,减小了电路的复杂度.然后两帧之间的差值被基于块的无损压缩方案编码.实验结果证明,压缩后的图像数据可以被无损失的还原.通过对7个具有代表性的8位深度1280×720@60 fps的样本视频进行测试,在块大小为4×4和模式切换阈值为63时实现了最佳的压缩效果.在几乎没有光的条件下压缩率高达78.5％.在复杂运动场景下该算法压缩率为43.5％.提出的压缩算法更适用于长时间处于静止场景的视频录制.     

基于稳健设计的SGNS算法的超参数调优方法

通常给定超参数的若干取值选取性能最大的为最优组合(称为直接选优法),但是此方法的稳健性差。为此,提出了一种基于稳健设计的超参数调优方法(称为稳健调优法)。具体地,以SGNS算法中的超参数调优为例,在词语推断任务上实验并得出:经方差分析得到SGNS算法中的七个超参数中的五个对算法预测性能有显著影响,确定为主控因子,其余两个确定为噪声因子,且主控因子中有三个对性能估计的方差有显著影响,因此,调优中仅从期望最大来直接选优是不合理的;稳健调优法与直接选优法两者在预测性能上没有显著差异,但稳健调优法对噪声因子具有较好的稳健性。稳健调优法对一般的深度神经网络的调参有实际的借鉴意义。     

网络中多节点故障定位的探测路径选择算法

针对现有故障定位技术不能满足多节点故障定位的要求,尤其当网络中存在大量故障节点时,提出了一种基于主动探测的探测路径选择算法。该算法主要包括用于故障检测的贪婪路径选择算法和用于故障定位的禁忌链路搜索算法。在故障检测阶段,使用贪婪路径选择算法迭代地选择具有最小权重的探测路径覆盖网络中的节点。在故障定位阶段,使用禁忌链路搜索算法多次生成候选路径集以选择最合适的探测路径来解决多节点故障定位问题。在随机网络拓扑和真实网络拓扑上的仿真结果表明,与现有的节点故障定位算法相比,探测路径选择算法具有更高的成功定位率和更低的探测成本。     

基于Filter Wrapper模式的特征选择算法*

特征选择是数据挖掘、机器学习和模式识别中始终面临的一个重要问题。针对类和特征分布不均时,传统信息增益在特征选择中存在的选择偏好问题,本文提出了一种基于信息增益率与随机森林的特征选择算法。该算法结合Filter和Wrapper模式的优点,首先从信息相关性和分类能力两个方面对特征进行综合度量,然后采用序列前向选择（Sequential Forward Selection, SFS）策略对特征进行选择,并以分类精度作为评价指标对特征子集进行度量,从而获取最优特征子集。实验结果表明,本文算法不仅能够达到特征空间降维的效果,而且能够有效提高分类算法的分类性能和查全率。     

Influence of depth-thickness ratio of mining on the stability of a bedding slope with its sliding surface in concave deformation

In order to study the influence of depth-thickness ratio on bedding slope stability, whose sliding surface is flexural concave in shape under mining conditions, this paper aims to study the characteristics of deformation and damage of bedding sliding with depth-thickness ratios of 200:1, 150:1, 120:1, 100:1 and 50:1by adopting numerical simulation analysis software combined with laboratory-made ‘‘under the influence of mining variable sliding surface slope similar simulation test bed", and to propose identification methods for slope stability under the influence of mining. The results show that mining activities under the slope reduce slope stability. With a decrease in the mining depth ratio, the influence of mining on the slope increases gradually, and the damage to the slope gradually expands, the stability of the slope gradually reduces, fracture occurs on the slope toe and the central fissure gradually develops to the surface,and reaches slide threshold when the depth-thickness ratio is 50:1.     

铝—钢双金属复合轧制层厚比及轧制力的研究

用实验方法研究了铝－钢双金属复合轧制时层厚比的变化规律。给出了双金属复合时轧制力的计算式。     

初探混联法生产氧化铝的工艺优化

在目前的生产条件下。通过大量的混联法物料衡算，定量地研究了供矿铝硅比、熟料铝硅比和拜年法赤泥铝硅比对混联法的制造成本、能耗和拜年法与烧结法的生产比例的影响规律，提出我国混联法生产进一步优化的方向和途径。并开发了研究和评价的计算软件。为混联法的生产和设计的进一步优化奠定基础。     

粘土砂旧砂再生效果与其含水量的关系

在影响粘土砂旧砂再生效果的诸多因素中,旧砂中水分含量是最重要的因素。本文就水分含量对再生效果的影响规律、再生效果最佳的水分含量等进行了研究和分析,得出了如下结论:并非含水量越低再生效果就越好,而是存在一个去泥率低谷区;再生效果最佳的适宜水分含量为1～2%。