浮动电极对屏蔽栅沟槽型MOSFET特性的影响

提出了在屏蔽栅沟槽型MOSFET(SGT)的沟槽侧壁氧化层中形成浮动电极的结构,通过改善电场分布,优化了特征导通电阻与特征栅漏电容。在传统SGT结构的基础上,仅通过增大外延层掺杂浓度,改变浮动电极的长度和位置以及氧化层厚度,最终得到击穿电压为141.1 V、特征导通电阻为55 mΩ·mm²、特征栅漏电容为4.72 pF·mm^-2的浮动电极结构。与相同结构参数的SGT结构相比,在击穿电压不变的条件下,浮动电极结构的特征导通电阻降低了9.3%,Baliga优值提升了13%,特征栅漏电容降低了28.4%。     

Floating Catalyst Chemical Vapor Deposition Patterning Nitrogen-Doped Single-Walled Carbon Nanotubes for Shape Tailorable and Flexible Micro-Supercapacitors

Micro-supercapacitors (MSCs) as high-power density energy storage units are designed to meet the booming development of flexible electronics, requiring simple and fast fabrication technology. Herein, a fast and direct solvent-free patterning method is reported to fabricate shape-tailorable and flexible MSCs by floating catalyst chemical vapor deposition (FCCVD). The nitrogen-doped single-walled carbon nanotubes (N-SWCNTs) are directly deposited on a patterned filter by FCCVD with designable patterns and facilely dry-transferred on versatile substrates. The obtained MSCs deliver an excellent areal capacitance of 3.6 mF cm⁻² and volumetric capacitance of 98.6 F cm⁻³ at a scan rate of 5 mV s⁻¹ along with excellent long-term cycle stability over 125 000 circles. Furthermore, the MSCs show good performance uniformity, which can be readily integrated via connection in parallel or series to deliver a stable high voltage (4 V with five serially connected devices) and large capacitance (5.1 mF with five parallel devices) at a scan rate of 100 mV s⁻¹, enabling powering the light emitting displays. Therefore, this method blazes the trail of directly preparing flexible, shape-customizable, and high-performance MSCs.     

基于模拟退火的动态缆线型优化北大核心CSCD

动态电缆在水中的线型对确保电缆的合理受力,保证疲劳寿命具有重要的作用。文中针对浮式风电动态缆的陡波线型,基于经典悬链线方程,以远位张力与近位曲率的利用率之和作为线型优化的目标,采用模拟退火算法对线型进行优化,分析了不同浮力系数对线型优化的影响。文中结论对线型工程设计具有一定参考和指导意义。     

典型半潜式平台结构的微振子捕能特性研究北大核心CSCD

半潜式平台在海洋资源开发领域应用前景广阔,但存在平台设备能源供给不足的问题。本研究把常见的半潜式平台简化为三种典型的浮式基础,将波浪能发电装置集成至浮式基础,建立浮式基础与浮子耦合的运动方程,利用水动力仿真软件AQWA开展数值模拟和参数化分析,获得了波浪方向、浮式基础的截面形状、浮子直径以及浮子与浮式基础间距等因素对浮子捕能特性的影响规律。结果表明,四棱柱浮式基础在特定波浪方向下能够增强微阵列浮子的捕能效果,三棱柱浮式基础使微阵列浮子更好地适应各个方向的波浪激励,圆柱浮式基础以遮蔽效应为主,较大程度上减弱了浮子的捕能特性;不同波浪方向对四棱柱浮式基础、三棱柱浮式基础周围的浮子影响较大,而对基于圆柱浮式基础的微阵列浮子影响不大;通过增加浮子的直径以及浮子距圆柱浮式基础的距离,能够有效提高微阵列浮子平均输出功率。本研究可为半潜式平台与波浪能发电装置的集成提供参考。     

串接小容量变压器预充磁技术参数设计

串接小容量变压器预充磁涌流抑制技术在船舶电力系统中应用广泛,但缺乏规范化的参数设计方法。推导了串接小容量变压器预充磁技术各次合闸最大励磁涌流峰值解析计算公式。基于此,以预充磁变压器合闸励磁涌流峰值小于系统额定电流,工作变压器合闸励磁涌流峰值小于差动保护启动值为原则确定可选预充磁变压器容量范围;从海洋核动力平台安全性、经济性角度出发规范预充磁电路结构;基于实际建立磁通与预期磁通相位一致原则规范预充磁变压器绕组接线方式;提出相邻周期涌流能量比方法计算变压器建立稳态磁通所需时间,规范预充磁最短合闸时间间隔。MATLAB/Simulink仿真结果表明,在不同合闸角、剩磁情况下,所设计的参数能够保证预充磁合闸过程中变压器差动保护可靠不误动。     

Flexible Nonvolatile Transistor Memory with Solution‐Processed Transition Metal Dichalcogenides

Nonvolatile field‐effect transistor (FET) memories containing transition metal dichalcogenide (TMD) nanosheets have been recently developed with great interest by utilizing some of the intriguing photoelectronic properties of TMDs. The TMD nanosheets are, however, employed as semiconducting channels in most of the memories, and only a few works address their function as floating gates. Here, a floating‐gate organic‐FET memory with an all‐in‐one floating‐gate/tunneling layer of the solution‐processed TMD nanosheets is demonstrated. Molybdenum disulfide (MoS₂) is efficiently liquid‐exfoliated by amine‐terminated polystyrene with a controlled amount of MoS₂ nanosheets in an all‐in‐one floating‐gate/tunneling layer, allowing for systematic investigation of concentration‐dependent charge‐trapping and detrapping properties of MoS₂ nanosheets. At an optimized condition, the nonvolatile memory exhibits memory performances with an ON/OFF ratio greater than 10⁴, a program/erase endurance cycle over 400 times, and data retention longer than 7 × 10³ s. All‐in‐one floating‐gate/tunneling layers containing molybdenum diselenide and tungsten disulfide are also developed. Furthermore, a mechanically‐flexible TMD memory on a plastic substrate shows a performance comparable with that on a hard substrate, and the memory properties are rarely altered after outer‐bending events over 500 times at the bending radius of 4.0 mm.     

Targeting orthotopic gliomas with renal-clearable luminescent gold nanoparticles

A major clinical translational challenge in nanomedicine is the potential of toxicity associated with the uptake and long-term retention of non-degradable nanoparticles (NPs) in major organs.The development of inorganic NPs that undergo renal clearance could potentially resolve this significant biosafety concern.However,it remains unclear whether inorganic NPs that can be excreted by the kidneys remain capable of targeting tumors with poor permeability.Glioblastoma multiforme,the most malignant orthotopic brain tumor,presents a unique challenge for NP delivery because of the blood-brain barrier and robust blood-tumor barrier of reactive microglia and macroglia in the tumor microenvironment.Herein,we used an orthotopic murine glioma model to investigate the passive targeting of glutathione-coated gold nanoparticles (AuNPs) of 3 nm in diameter that undergo renal clearance and 18-nm AuNPs that fail to undergo renal clearance.Remarkably, we report that 3-nm AuNPs were able to target intracranial tumor tissues with higher efficiency (2.3x relative to surrounding non-tumor normal brain tissues) and greater specificity (3.0x)than did the larger AuNPs.Pharmacokinetics studies suggested that the higher glioma targeting ability of the 3-nm AuNPs may be attributed to the longer retention time in circulation.The total accumulation of the 3-nm AuNPs in major organs was significantly less (8.4x) than that of the 18-nm AuNPs.Microscopic imaging of blood vessels and renal-clearable AuNPs showed extravasation of NPs from the leaky blood-tumor barrier into the tumor interstitium.Taken together,our results suggest that the 3-nm AuNPs,characterized by enhanced permeability and retention,are able to target brain tumors and undergo renal clearance.     

Engineered microparticles based on drug–polymer coprecipitates for ocular-controlled delivery of Ciprofloxacin: influence of technological parameters

Abstract

Ciprofloxacin is a drug active against a broad spectrum of aerobic Gram-positive and Gram-negative bacteria, for the therapy of ocular infections. It requires frequent administrations owing to rapid ocular clearance and it is a good candidate for ocular controlled release formulations. The preparation of such drug release systems is still a challenge. Ionic interactions between ciprofloxacin and the polyelectrolytes chondroitin sulfate or lambda carrageenan result in coprecipitates that can act as microparticulate controlled release systems from which the drug is released after being displaced by the medium’s ions. In some formulations, Carbopol was added to improve the mucoadhesive properties. The aim of this research was the study of the influence of the technological parameters of the preparation method of coprecipitates on their particle size, with the goal of achieving particles engineered with a size suitable for the ocular administration. Technological parameters taken into account were: concentration of drug and polymer solutions utilized for the preparation of interaction products, possible use of surfactants (kind and concentration), temperature of the solutions and stirring during the process of preparation of the coprecipitates. Preliminary stability study tests were carried out to further characterize the leader formulation. Particle size in suspensions for ocular drug delivery is a critical parameter influencing the quality of the formulation. The results obtained from this study show that chondroitin sulfate coprecipitates present the best characteristics in terms of particle size suitable for ocular administration. A further improvement of the particle size characteristics has been obtained with the addition of surfactants.     

粉煤灰漂珠@BaTiO_3@PAn的制备及其电流变性能

聚苯胺(PAn)作为电流变材料具有响应快、屈服应力大的特点,但因其良好的导电性能导致漏电击穿现象发生,为了进一步增加PAn的悬浮稳定性,引入了粉煤灰漂珠(FAFB),BaTiO_3作为经典的电介质材料也引入其中以进一步提高材料的介电性能。采用逐层包覆的思路,利用溶胶-凝胶法在漂珠表面包覆BaTiO_3,获得FAFB@BaTiO_3,再利用原位聚合法制备以FAFB@BaTiO_3为核、PAn为壳的结构复合材料即FAFB@BaTiO_3@PAn。利用FTIR、XRD和SEM对材料的结构与形貌进行分析,借助四探针技术和LCR数字电桥对材料的导电与介电性能进行分析,利用自组装电流变仪进行了电流变特性测试,考察了7d内的悬浮稳定性能。结果表明:BaTiO_3、PAn确实发生了逐层包覆,且电导率、介电常数、介电损耗和剪切应力均符合复合效应规律,介于PAn与FAFB@BaTiO_3之间,其中,剪切应力可达675Pa(电场强度为3.0kV/mm);漏电现象得到缓解,击穿电压提高了20%;比较悬浮稳定性发现,7d后FAFB@BaTiO_3@PAn悬浮率仍为82%。