舞钢管线钢的开发与生产

系统介绍了舞钢开发的针状铁素体型X70宽厚板的设计思路、工艺特点和实物水平；采用电炉 炉外精炼 连铸 TMCP工艺生产的X70宽厚板满足西气东输专用技术条件的要求，并批量应用在西气东输主干线工程中。     

Simulation of the Forming Behaviour of a Boron Modified P91 Ferritic Steel

The forming behaviour at high temperature of a modified 9%Cr‐1%Mo (P91) ferritic steel containing B and Ti for elevated temperature service was investigated. The microstructure of the as‐received material is mainly martensite at room temperature, but special etching revealed prior austenite grains of about 25 μm in size. Torsion tests were conducted at temperatures in the range 850 to 1250 °C to simulate the hot rolling process under comparable conditions of temperature, strain rate and strain. The deformation data obtained from these tests were correlated with the Garofalo equation with a stress exponent of 4.6 and an activation energy of 315 kJ/mol. This equation was used to predict the formability behaviour for the rolling process and also to determine the maximum forming efficiency and stability of the steel. A temperature of 1200 °C is recommended to conduct the forming process.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

疏水缔合型聚丙烯酰胺的合成与性能评价

为了提高高相对分子质量的聚丙烯酰胺的抗温抗盐性能,利用自制的两亲表面活性单体与丙烯酰胺共聚合成了疏水缔合型聚丙烯酰胺并进行室内评价。结果表明,在高温、高盐、高钙条件下,合成的疏水缔合型聚丙烯酰胺具有良好的增粘性和较强的热稳定性;克服了疏水缔合型聚合物在盐水中溶解性差的问题,可用各种矿化度的盐水和油田产出污水配制;具有良好的无机盐增粘性能和抗温性能。     

住宅建筑带钢副框铝合金门窗防渗漏施工技术

使用自粘性防水卷材对带钢副框的铝合金门窗窗边进行粘接,以防止雨水通过副框与墙体之间的缝隙渗漏到室内,重点介绍了详细的施工措施。     

艺术建筑设计的探索

通过徐州一中艺术楼的设计实践，寻求优美而独特的艺术形象，并用纯几何形体的组合来达到功能与形式的完美统一。     

A parametric interpolator with confined chord errors, acceleration and deceleration for NC machining

Parametric interpolation has many advantages over linear interpolation in machining curves. Real time parametric interpolation research so far has addressed achieving a uniform feed rate, confined chord errors and jerk limited trajectory planning. However, simultaneous consideration of confined chord errors that respect the acceleration and deceleration capabilities of the machine has not been attempted. In this paper, the offline detection of feed rate sensitive corners is proposed. The velocity profile in these zones is planned so that chord errors are satisfied while simultaneously accommodating the machine's acceleration and deceleration limits. Outside the zone of the feed rate sensitive corners, the feed rate is planned using the Taylor approximation. Simulation results indicate that the offline detection of feed rate sensitive corners improves parametric interpolation. For real time interpolation, the parametric curve information can be augmented with the detected feed rate sensitive corners that are stored in 2×2 matrices.     

德兴铜矿变配电网络地理信息系统设计与实践

介绍了矿山变配电地理信息系统的设计与实施。     

油田热采注汽管道在线检测技术现状

稠油热采注汽管道由于长期在高温、高压下运行,极易发生各种损伤,如腐蚀、裂纹、材料退化等,极易造成管道承压能力降低,发生失效事故。如何检测出潜在危险性缺陷,判断注汽管道能否继续使用,是保证注汽管道安全运行的关键问题。探讨了高温压力管道在线检测技术发展现状及其应用范围。     

昆2井优快钻井及油气层保护技术

昆2井是一口位于柴北缘西段的昆特依凹陷潜伏Ⅰ号圈闭上的风险探井,设计井深为5950m。针对柴北缘深探井存在的主要技术难题,制定了昆2井的技术对策。通过对钻井设备的优选、井身结构的优化、钻头及钻具组合的优选、钻井参数及钻井液性能的优化、油气层保护技术的研究与应用,形成了一套适合于柴北缘的优快钻井技术,使昆2井的完钻井深达到5950m。与邻区的深探井平均水平相比,在井深增加888m、大尺寸井眼段更长的前提下,昆2井的钻井、完井周期分别缩短了98.75d、124.2d,钻机月速度增加了317m/台,平均机械钻速增加了0.82m/h。根据“理想充填新理论”,确定了保护油气层的最优复配暂堵方案,利用该方案所配制的钻井液其渗透率恢复值达到了87.5%以上,流变性能良好,滤失量低,对改善泥饼质量、增强井壁稳定性有明显的效果。