Failure load prediction of structural adhesive joints : Part 2: Experimental study

The objective of this study was to determine how the fracture of adhesive joints depends on elastic beam parameters describing the adherends and the applied loads. The basic specimen geometry was the cracked lap shear joint constructed of aluminium alloy with various adherend and bondline thicknesses. Loads were applied in different combinations of bending, tension and shear to generate a failure envelope for each adhesive and specimen geometry. It was found that crack propagation for precracked specimens occured at a critical strain energy release rate but was also a function of the G_I/G_II ratio and the bondline thickness. The experiments also showed that the loads required to propagate a crack in a precracked specimen were always lower than the loads required to break the fillet. Hence, by treating uncracked joints as being cracked, where the fictitious crack tip is assumed to coincide with the location of the fillet, a conservative estimate of the failure load is obtained.     

多降液管筛板塔的设计计算

简要介绍多降液管筛板塔的特点及塔板参数的设计计算方法。     

美国能源部的浆态床F－T合成技术

浆态床Ｆ－Ｔ合成技术是美国能源部Ｆ－Ｔ合成技术的主要开发项目。本文就浆态相Ｆ－Ｔ合成催化剂的开发、中试示范实验和浆态反应器的化工基础研究作一扼要的介绍。     

FORMATION AND FLOW OF GAS BUBBLES IN A PRESSURIZED BUBBLE COLUMN WITH A SINGLE ORIFICE OR NOZZLE GAS DISTRIBUTOR

The characteristics of gas bubbles in a 5 cm diameter bubble column equipped with a single orifice of 1,3 or 5 mm diameter were investigated under system pressure of 0.1-15 MPa. The formation of gas bubbles was strongly affected by the system pressure. Under high pressures a dispersed gas jet was formed at gas velocities where spherical gas bubbles would have been formed at atmospheric pressure. The critical gas velocity between the bubbling regime and the jetting regime was correlated with the liquid phase Weber number and the gas phase Reynolds number based on the gas velocity at the orifice. Bubble size and gas holdup in the main part of the bubble column were also affected by the bubble formation pattern at the distributor     

真空粉末绝热低温贮罐制造的部分工艺方法

在真空粉末绝热低温贮罐的制造过程中、通过吸附器分子筛的活化、夹层真空系统的处理和充装珠光砂等工艺方法的改进,可较大地缩短产品的制造周期并提高产品的质量。     

Synthesis of Pseudoionones by Acid and Base Solid Catalysts

The preparation of pseudoionones by aldol condensation reaction between citral and acetone have been carried out in the presence of acid (HY and beta zeolites), an acid–base (amorphous aluminophosphate) and basic catalysts such as an aluminophosphate oxynitride, MgO and different activated hydrotalcites. The results showed that acid or acid–base catalysts were not successful for performing in one pot the preparation of ionones. MgO and calcined hydrotalcites showed excellent activity and selectivity to pseudoionones, with calcined hydrotalcite more selective than MgO. Moreover, the rate of reaction can be improved by activating the hydrotalcite through rehydration. This activation can be successfully done by simply adding the optimum amount of water to the calcined hydrotalcite before reaction. The inhibiting effect of the concentration citral on the catalytic activity of rehydrated hydrotalcites that has been reported to occur at 273 K can be avoided by working at a reaction temperature of 333 K.     

Flow regime, hydrodynamics, floc size distribution and sludge properties in activated sludge bubble column, air-lift and aerated stirred reactors

This paper presents a comparative study how reactor configuration, sludge loading and air flowrate affect flow regimes, hydrodynamics, floc size distribution and sludge solids-liquid separation properties. Three reactor configurations were studied in bench scale activated sludge bubble column reactor (BCR), air-lift reactor (ALR) and aerated stirred reactor (ASR). The ASR demonstrated the highest capacity of gas holdup and resistance, and homogeneity in flow regimes and shearing forces, resulting in producing large numbers of small and compact flocs. The fluid dynamics in the ALR created regularly directed recirculation forces to enhance the gas holdup and sludge flocculation. The BCR distributed a high turbulent flow regime and non-homogeneity in gas holdup and mixing, and generated large numbers of larger and looser flocs. The sludge size distributions, compressibility and settleability were significantly influenced by the reactor configurations associated with the flow regimes and hydrodynamics.     

无线通信基站建设中电磁辐射缓解技术应用实践

无线通信基站电磁辐射缓解技术包括增加发射天线架设高度、增加天线增益、降低发射器功率、减小VRP下倾角度和改变垂直辐射图VRP等。结合案例分析了无线通信基站建设过程中电磁辐射缓解技术的应用实践。     

基于多渐消因子强跟踪UKF 和约束AR模型的故障估计与预测

针对非线性系统中不可观测故障参数估计和预测问题, 提出一种基于多重渐消因子强跟踪无迹卡尔曼滤波(MSTUKF) 的状态和参数联合估计法, 通过引入多重渐消因子增强了对变化函数未知的故障参数的跟踪能力. 对于得到的故障参数估计值, 利用递推最小二乘法更新约束AR预测模型, 从而实现故障参数的在线估计与预测. 仿真结果表明, MSTUKF方法在故障参数估计精度上优于UKF 和单渐消因子强跟踪UKF, 约束AR模型的预测精度高于无约束条件下的预测精度.

     

SYNTHESIS OF ACICULAR GOETHITE PARTICLES BY OXIDATION OF AQUEOUS FERROUS HYDROXIDE SUSPENSION IN A BUBBLE COLUMN WITH DRAFT TUBE

Acicular goethite particles were synthesized by oxidation of an alkaline suspension of ferrous hydroxide using a bubble column with draft tubes of different diameters at a constant temperature of 40°C. The oxidation rate increased with decreasing draft tube diameter. The mean size based on the major axis of acicular particle decreased with increasing oxidation rate and decreasing draft tube diameter. The major axis was found to grow preferentially compared with the minor axis. The mean size of major axis was correlated well to the modified reaction rate defined as a product of the reaction rate per unit volume of the reactor multiplied by the ratio of the column diameter to the draft tube diameter, irrespective of the draft tube diameter.