纵横波测井资料在储层评价中的应用

将弹性波基础理论，Gasman理论，Biot理论和实验研究结果相结合，探讨了沉积岩地层中速度和弹性模量，弹性模量和孔隙度，剪切模量和孔隙度，速度和孔隙度，孔隙度和Biot系数之间的关系，利用从各种声学测井资料中提取出的P波和S波时差（或速度）定量评价地层孔隙度和骨架物质，辅以泥质指示测井曲线，可以计算地层孔隙度，饱和度，岩性等参数，在M，Krief方法的基础上，采用优化算法寻求适合于任何岩性地层的孔隙度与Biot系数之间的关系式，提高了Biot系数的计算精度，该评价方法有坚实的实验基础和理论基础，评价结果与实验室岩心分析数据吻合。     

永8复杂断块油藏水平井地质优化设计

永8块为复杂断块油藏，若全部采用直井开发，不但井网密度大、开采时间长，而且直井防砂后产量低，开发效益不明显。水平井开发的可行性论证认为，出砂的复杂断块油藏适合用水平井开发；水平段应与大断层保持一定的距离且位于正韵律油层的中上部。采用直井和水平井相组合的布井方式，可充分发挥直井钻遇油层层数多和水平井与油层接触面积大、产量高的优势，从而提高复杂断块油藏的开发效果。     

电视机监督检验电磁兼容结果分析和对策

本文讨论了电磁兼容对电视机的技术要求和相应对策。     

Discrete singular convolution and its application to the analysis of plates with internal supports. Part 2: Applications

Part 2 of this series of two papers presents the applications of the discrete singular convolution (DSC) algorithm. The main purpose of this paper is to explore the utility, test the accuracy and examine the convergence of the proposed approach for the vibration analysis of rectangular plates with internal supports. Both partial internal line supports and complex internal supports are considered for 21 square plates of various combinations of edge support conditions. The effects of different size, shape and topology of the internal supports and different boundary conditions on the vibration response of plates are investigated. The partial internal line supports may vary from a central point support to a full range of cross or diagonal line supports. Several closed‐loop supports, such as ring, square and rhombus, and their combinations are studied for complex internal supports. Convergence and comparison studies are carried out to establish the correctness and accuracy of the DSC algorithm. The DSC results are compared with those in the available literature obtained by using other methods. Numerical results indicate that the DSC algorithm exhibits controllable accuracy for plate analysis and shows excellent flexibility in handling complex geometries, boundary conditions and support conditions. Copyright © 2002 John Wiley & Sons, Ltd.     

Design for Consecutive Testability of System-on-a-Chip with Built-In Self Testable Cores

This paper introduces a new concept of testability called consecutive testability and proposes a design-for-testability method for making a given SoC consecutively testable based on integer linear programming problem. For a consecutively testable SoC, testing can be performed as follows. Test patterns of a core are propagated to the core inputs from test pattern sources (implemented either off-chip or on-chip) consecutively at the speed of system clock. Similarly the test responses are propagated to test response sinks (implemented either off-chip or on-chip) from the core outputs consecutively at the speed of system clock. The propagation of test patterns and responses is achieved by using interconnects and consecutive transparency properties of surrounding cores. All interconnects can be tested in a similar fashion. Therefore, it is possible to test not only logic faults but also timing faults that require consecutive application of test patterns at the speed of system clock since the consecutively testable SoC can achieve consecutive application of any test sequence at the speed of system clock.     

CAS-BUS: A Test Access Mechanism and a Toolbox Environment for Core-Based System Chip Testing

As System on a Chip (SoC) testing faces new challenges, some new test architectures must be developed. This paper describes a Test Access Mechanism (TAM) named CAS-BUS that solves some of the new problems the test industry has to deal with. This TAM is scalable, flexible and dynamically reconfigurable. The CAS-BUS architecture is compatible with the IEEE P1500 standard proposal in its current state of development, and is controlled by Boundary Scan features.This basic CAS-BUS architecture has been extended with two independent variants. The first extension has been designed in order to manage SoC made up with both wrapped cores and non wrapped cores with Boundray Scan features. The second deals with a test pin expansion method in order to solve the I/O bandwidth problem. The proposed solution is based on a new compression/decompression mechanism which provides significant results in case of non correlated test patterns processing. This solution avoids TAM performance degradation.These test architectures are based on the CAS-BUS TAM and allow trade-offs to optimize both test time and area overhead. A tool-box environment is provided, in order to automatically generate the needed component to build the chosen SoC test architecture.     

复合形法优化内河航道重力式护岸

采用复合形优化法,结合《港口及航道护岸工程设计与施工规范》中推荐的抗滑、抗倾稳定的分项系数计算方法,并考虑了内河航道船形波等作用的影响效应,对重力式护岸断面进行了优化。     

气体加速泵排水采气工艺技术应用与展望

介绍气体加速泵的结构、工艺原理及现场试验情况.通过室内实验和研究,并在蜀南气矿S1、S2井进行了先导性试验,对其在有水气田的应用作出了适应性评价.     

Juvenile competence to stand trial evaluations: A survey of current practices and test usage among psychologists.

What is the current standard of practice for evaluations of juvenile competence to stand trial (JCST)? The present study surveyed psychologists regarding the practices used when conducting JCST evaluations. Respondents rated the importance of 17 elements that might be included in a JCST evaluation report. Of these elements, 7 were considered essential by 70% or more of respondents, with 9 additional elements rated as either essential or recommended. A majority of respondents felt that the use of psychological and forensic instruments was important. A list of tests used is provided, and the implications for the development of standards and policy are discussed to provide practitioners with additional knowledge that will help to further the state of the discipline. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

土壤源热泵取热的实验研究

通过广泛分析国内外对土壤源热泵实验研究的现状,建立了可以模拟多个地区、多种运行工况的土壤源热泵沙箱实验台,并进行了绝热边界工况短期内取热的实验研究。