相转移催化合成芳基烷基醚

报道了以四丁基溴化铵为相转移催化剂，简便地合成了１０个芳基烷基醚，反应几乎是定量地快速进行。     

Voigt线型及其精确快速算法

通过把上半复平面分为４个区，并在每一区利用不同近似，建立了一种精确快速计算Ｖｏｉｇｔ函数、修正的Ｖｏｉｇｔ函数和Ｖｏｉｇｔ函数偏导数的算法，其最大相对误差小于５×１０－４．该算法是Ｌｉｎｅ－ｂｙ－Ｌｉｎｅ大气透过率／辐射强度计算及其相关应用的有效算法．     

全液压稠油热力开采过程井下流体的传热

针对稠油黏度高、密度大、驱替效率低,常规方法开采困难等问题,开展了稠油开采装置研究。介绍了全液压稠油开采装置在原油开采过程中的加热功能,分析了采油装置系统井下流体流动及传热过程。结合理论研究方法和热力学计算,建立了井下流体热交换的物理和数学模型,并对模型进行了分析、矫正和求解。以实际油井参数和液压油的流量、温度为输入参数,通过计算机仿真模拟了井下热交换参数之间的关系,从而改进了已获得的热交换理论方程和模型,并得出了原油的产量与液压油的输入量之间的关系,以及保温提采原油所需要的最小液压油输入量。该模型的建立为进一步研究不同井况和不同输入状态下的流体传热提供了理论依据。     

Solution of temperature fields in hydrodynamics bearings by the numerical network method

Solution to the 2-D steady-state nonlinear heat conduction equation, involving cylindrical coordinates, applied to a plain bearing by a simple and versatile numerical technique based on network method is presented in this work. These advantages of the technique are necessary for the status evaluation of industrial machines during operation because time and computing resources are limited. The pressure field in the fluid is previously solved from the Reynolds equation by finite element method. The main difficulty is associated with the exponential dependency of the viscosity on temperature. The proposed model is very efficient and requires negligible computing times. Solutions are very close to the experimental and numerical results of other researchers.     

新产品——钢带增强聚乙烯螺旋波纹管

钢带增强聚乙烯螺旋波纹管是一种创新的埋地排水管,把钢材的高刚度、高强度和聚乙烯的柔韧、耐腐结合在一起,突出的优点是环刚度高和节约原材料.     

Comparison of mass transfer efficiency in horizontal rotating packed beds and rotating biological contactors

In this study, the mass transfer efficiencies of a novel horizontal rotating packed (h‐RPB) bed and the conventional disc‐type rotating biological contactor (RBC) were studied at four speeds and seven submergences. Pall rings of two different sizes (25, 38 mm), superintalox saddles and a wiremesh spiral bundle were used as packings in the h‐RPB. Volumetric gas–liquid mass transfer coefficients were determined by unsteady state absorption of atmospheric oxygen in de‐aerated water. Power consumption per unit liquid volume has been found for all geometries tested. The oxygen transfer efficiency values for the h‐RPB were found to be 2–5 kg kWh^?1 and for the disc RBC were found to be 1–2 kg kWh^?1. The performance of the h‐RPB was also compared with other gas–liquid contactors such as surface aerators. The study proves that the h‐RPB is a energy efficient alternative to conventional contactors. Copyright © 2005 Society of Chemical Industry     

大港油田关家堡地区不同含油层系气测解释方法探讨

大港油田关家堡地区油气藏特征复杂，不同含油层系油气显示特征不同，气测录井解释符合率相对较低。针对这一情况，通过分析关家堡地区明化镇组、馆陶组和沙河街组的地质和气测显示特征，结合试油结论，提出不同含油层系相应的气测录井解释方法——TR与Wh（湿度比）气测解释法和三角形图板法，归纳总结了全烃及组分在不同层系的变化规律。应用实例表明，效果较好，对于复杂油气藏多层系油气层的解释评价具有一定的借鉴作用。     

升深2-17井络合铝聚合物充气钻井液现场试验

为加快徐加固子深层天然气的勘探开发步伐，缩短深层气井的建井周期，在升深2-17井进行了充气钻井试验。介绍了络合铝聚合物充气钻井液技术的现场应用概况及效果以及井漏的发生与处理过程、钻井液起泡的解决措施。在现场试验过程中，络合铝聚合物钻井液性能稳定，具有较强的抑制性和较好的流变性能，流性指数控制在0．7左右，具有良好的携屑和稳定井壁能力，而且粘度较低，基本上控制在33～52s之间，满足了现场充气和脱气的需要；该钻井液抗温可达180℃，润滑性能较好，在钻井过程中无粘卡显示，在深井欠平衡井眼稳定方面取得了较好的效果；在不同的气液比条件下，可以在0．83～1．08g／cm。之间实现对当量密度的调节;与常规钻井工艺相比，充气钻井可以使机械钻速提高30％～50％；在钻进过程中实现了充气和点火同时进行，达到了欠平衡钻井工艺技术的要求，为进一步开展气体钻井打下了良好的基础。     

小高层剪力墙结构开洞设计探讨

小高层建筑需通过剪力墙开洞(结构开洞)降低侧向刚度,本文对开洞部位以及墙肢和连梁设计提出一些看法,供设计人员参考。