卤水净化中储存加药方法的改进

制盐行业卤水净化都是采用库存药品和人工加药，这种做法劳动强度大，环境恶劣，影响人们健康，又不经济。为此介绍一种新的药品储存和投加工艺及设备。     

���������ɹ���ߺ�����������ѹ�����㷽����MDT���Է���

川东北飞仙关组高含硫气藏气井在完井测试过程中，压力测点位置与产层中部的距离较大，需将压力数据用气柱压力计算公式折算后再进行试井分析解释。文章以质量、动量和能量三大守恒方程和状态方程为基础，考虑了流动气柱的动能损失以及井筒和地层中复杂的传热机理，推导出计算单相气流在井筒不同部位压力和温度的方法。以坡2井为例，应用目前最新的模块化动态地层测试器MDT地层测试技术，对折算的压力进行了验证和对比分析。结果表明，应用文中的压力计算方法，完全可以满足解释的压力数据精度。另外，在没有进行完井测试前利用MDT测压资料确定地层压力等储层参数是较为直接和可靠的方法。同时此法对川东北飞仙关组高含硫气藏的开发动态监测以控制元素硫在井底和井筒的沉积具有十分重要的指导意义。     

多层砖砌体房屋震害分析及抗震措施

介绍了我国砖砌体房屋历年来遭受震害的程度以及砖砌体的抗震性能，针对一些震害现象，分别从建筑布置和抗震措施加强对砖砌体的抗震性能进行论述。     

用DataGrid控件分页显示数据

本文针对网页中的数据库显示问题，讨论了在Microsoft．Net界面下使用DataGrid控件过程中建立数据库链接的类SqlConnection及类OLEDb Connection，实现了DataGrid控件对数据库的分页显示。     

Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures

In this study, analytical modeling of the tensile strength of hot-mix asphalt (HMA) mixtures at low temperatures was developed. To do this, HMA mixtures were treated as a two-phase composite material with aggregates (coarse and fine) dispersed in an asphalt mastic matrix. A two-phase composite model, which was similar to Papanicolaou and Bakos's [J. Reinforced Plast. Compos. 11 (1992) 104] model with a particle embedded in an infinite matrix, was proposed. Unlike Papanicolaou and Bakos's model, an axial stress was introduced to the fiber end to consider the load transferred from the asphalt mastic the aggregate. Efforts were also made to consider the effect of aggregate gradation, asphalt mastic degradation, and interfacial damage between the aggregates and asphalt mastic matrix on the tensile strength of the HMA mixtures. Experimental investigations were conducted to validate the developed theoretical relations. A reasonable agreement was found between the predicted tensile strength and the experimental results at low temperatures. Parameters affecting the tensile strength of asphalt mixtures were discussed based on the calculated results.     

Efficiency of sediment transport by flood and its control in the Lower Yellow River

1IntroductionIntheriversystemwithsediment-ladenflow,WaterUseforSedimentTransport(WUST)isaveryimportantcomponentofecologicalwaterdemands,whichmaintainfundamentalfunctionofallecosystemcomponentsataspecificlevelofcondition[1].EnoughWUSTisthepremisetokeepthestableriver-bedandhealthyriverecosystem;alsoitisthebaseflowofriverfortheexploitationofwaterresources.Comparingwithotherrespectsrelatedwithwaterdemandsofriverecosystemsuchastheminimumflowforfishesorripariantrees,researchesontheWUSTarequite…     

Mg-Li基复合材料研究进展

Mg Li基复合材料具有很高的比强度和比刚度 ,是宇航、兵器等行业的理想结构材料之一。本文综述了Mg Li基复合材料常用的基体合金和增强体、制备方法以及复合材料的组织与性能。对目前存在的问题进行了探讨 ,并给出了可能的解决方法。     

多功能复合化学剂在蒸汽吞吐中的应用

辽河油田稠油热采以蒸汽吞吐开采为主,随着注汽轮次的不断增加、生产过程中各种工艺措施的不断介入,油藏受热水及其它侵入介质的影响,综合含水逐步上升,油层近井地带污染日益严重,直接影响了采收率,限制了稠油的高效开发.从油藏地质条件变化和伤害机理入手,开发研制出注蒸汽化学辅助技术--多功能复合化学剂.室内试验和现场应用表明,该技术能有效降低原油粘度、疏通油层、降低油水界面张力、改善稠油流动性、增加油层能量、提高采收率,从根本上改善稠油热采效果.     

The oxidation of two ternary Ni-Cu-10 at.% Al alloys in 1 atm of pure O2 at 800-900 °C

The oxidation of the ternary alloys Ni-45Cu-10Al and Ni-30Cu-10Al has been studied at 800-900 °C under 1 atm O₂. The presence of 10 at.% Al reduces significantly the oxidation rate of the corresponding Cu-Ni alloys during the initial oxidation stages, even before the establishment of a complete Al₂O₃ layer. The weight of individual sample of the two ternary Ni-Cu-10Al alloys at 800 °C increases more rapidly than at 900 °C during the initial oxidation stage. As oxidation proceeds, the weight gain at 800 °C slows down to a degree that the total weight gain after 24 h oxidation at 800 °C is less than that at 900 °C. Due to a faster formation of the Al₂O₃ layer, which suppresses earlier the further oxidation of Cu and Ni, the external region of the scales grown on Ni-45Cu-10Al contain much less Cu and Ni oxides than those grown on Ni-30Cu-10Al. The transition from the internal oxidation to the selective external oxidation of the most reactive component Al in Ni-Cu-Al alloys is favored by higher values of the Al content, of temperature and of the Cu/Ni ratio.     

Quantification of the layer dispersion degree in polymer layered silicate nanocomposites by transmission electron microscopy

As the performance of polymer layered silicate nanocomposites strongly depends on their interior layer dispersion, quantification of the layer dispersion degree is needed. In this work, a new methodology was developed to determine the dispersion parameter D_0.1, based on the measurement of the free-path spacing distance between the single clay sheets from the transmission electron microscopy (TEM) images. Several examples of exfoliated, intercalated, and immiscible composites were studied. It was found that the exfoliated composites had D_0.1 over 8%, while that of intercalated composites were between 4 and 8%. In the case of intercalation, a high frequency peak appeared at a short spacing distance in the histogram, which was a characteristic of the intercalation, distinct from the exfoliation. The main utility of this TEM methodology is for the quantification of exfoliated or intercalated samples with small number of layers with stacks. The dispersion parameter D_0.1 below 4% was suggested to classify as immiscible. A unique advantage of the TEM measurement is that the dispersion degree of different fillers can be counted individually.