Cu-Fe-Cr原位复合材料的纤维相结构

通过感应熔炼和冷拔变形制备了Cu 16Fe 2Cr原位复合材料 ,将铜基体选择腐蚀后提取出了纤维 ,采用SEM和TEM观察分析了纤维相结构。在较低的应变量 (η =1.6 7)时 ,纤维不均匀 ,随着变形量的增大 (η =5 .42 ) ,纤维外形变得均匀。在 η =5 .42时 ,一个显著的特点是单根Fe Cr纤维分为一些由晶界隔开的平行亚单元 (宽度约为 10 0nm) ,通过亚单元共同的 [110 ]衍射获得了晶粒之间的相对取向 ,相邻晶粒的取向角在 3°～ 15°之间。     

固溶处理对铝热-离心法制备的不锈钢衬层显微结构的影响

研究了铝热 -离心法制备的复合钢管中不锈钢内衬层的显微结构以及固溶处理对不锈钢层的显微结构及力学性能的影响。结果表明 ,不锈钢内衬层主要由奥氏体枝晶组成 ,枝晶间分布着一薄层铁素体。铁素体区内有AlNi金属间化合物析出。奥氏体和铁素体的相界面上有σ相析出。 1 0 0 0℃固溶处理可消除缓慢冷却过程中在不锈钢中形成的σ相和AlNi析出相 ,显著提高不锈钢的塑性 ,不锈钢内衬层的伸长率由处理前的 8%提高到处理后的 2 1 %。     

Fabrication of composite wire of lead coated on glass fiber by extrusion

1　INTRODUCTIONCoatingglassfiberwithleadproducesakindofnewcontinuouscomposite ,whichcanfindwideap plicationsinmanydifferentfields ,especiallyinthebatteryoftheEVsandHEVsthathasalreadybecomethemostimportantgoalinmostcountries[13] .Withakindofspecialtechnologythiskindofnewcompos itewirecanbeusedtoproducegridsofnewleadacidbatterythatisveryusefultotheEVsandHEVs .Thiskindofnewleadacidbatteryhasmanyadvan tages ,suchashigherspecificenergy ,lessinnerresis tance ,morequicklychargingcapabilityand…     

Composite purification technology and mechanism of recycled aluminum alloys

Iron-rich inclusions in aluminum alloys can be effectively removed by composite purification of sedimentation and filtration technology. The results show that the purposed method has no negative effects on aluminum alloys and obviously improve their mechanical properties.     

固液挤压下陶瓷粒子增强铝基复合材料组织特点及其形成机制

本文使用接触反应法制备ＴｉＣｐ／ＬＹ１２复合材料熔体，然后经固液挤压直接制取复合板材与棒材。使用背散射扫描电镜对Ｔ６处理后的复合板材组织特点进行观察，揭示了颗粒的分布特征、基体组织特点及其成因。     

STUDY ON THE TENSILE FATIGUE DAMAGE OF QUASI—ISOTROPIC COMPOSITE LAMINATES

Quasi-isotropic. laminates have isotropic elastic properties in all in-plane directions. Therefore, this kind of laminate is widely used for structural elements. The simplest stacking sequence of quasi-isotropic laminates is [0/-60/60]s. When the direction of applied axial load to [0/-60/60]s laminate is inclined at a 30-degree angle, we have the other quasi-isotropic laminate [30/-30/90]s under axial load. The failure mechanisms of these two laminates are, however, entirely different from each other because these two laminates have different distribution of the interlaminar stresses. It was confirmed by tensile fatigue tests that the [0/-60/60]s laminate does not show any visible fatigue damage, but the [30/-30/90]s laminate develops edge-delamination during cyclic loading. The analytical results were in good agreement with the experimental results.     

SiCp/2024铝基复合材料的超塑性变形行为研究

对经过热处理和冷轧后的体积分数为17％，尺寸为3．5μm的SiC颗粒增强2024铝合金薄板在753－853K范围内进行了超塑性实验研究. 结果在813K时以10^-1/S的变形速率下获得了259％的最大延伸率，最大应力敏感系数为0．25复合材料的变形激活能值在753－793K范围内为144kJ/mol，在813－853K内为202kJ/mol，接近纯铝的晶格扩散激活能值142kJ/mol。复合材料的变形机制主要为基体晶粒滑动机制。     

铝基纳米复合材料的电子显微镜研究

一种由部分非晶和部分晶体组成的新型铝合金可以用液态旋淬法直接制备，其力学性能非常优异。电镜观察表明这种纳米复合材料具有新颖的结构：纳米级Ａｌ晶体均匀弥散分布在非晶体上且无择优取向，Ａｌ晶体具有面心立方结构。高分辨电镜初步结果显示这种Ａｌ了无内部缺陷，但存在某种程度的畸变，且界面结构非常复杂。     

New inverse method for identification of constitutive parameters

A new inverse method by coupling iSIGHT and ABAQUS was proposed to determine the constitutive parameters of Al2O3sf/LY12 composite deforming at elevated temperature. It combined the merits of the f＇mite element simulation and optimization technique. The direct model was simulated with finite element code ABAQUS. The inverse problem associated with the identification of the constitutive parameters was expressed as a least square optimization problem. The direct simulation and the parameters optimization were implemented in iSIGHT integrated environment. The aim was to match the output of the direct simulation with the experiment data. The capability of the proposed inverse method was demonstrated through the identification of constitutive parameters of Al2O3sf/LY12 composite. The proposed new inverse method is also applicable to other parameters identification which is hardly determined through experiments or direct analytical method.