Molecular association complex of urea with polyethylene: 3. Structural studies of the complex

The crystal structure of urea-polyethylene complex in the hexagonal form, obtained by one of our preparation methods, is analysed by X-ray power diffractometry. In this analysis, the fixed molecular parameters of urea are used, and three models with respect to rotational disorder of the guest polyethylene molecule are assumed. It is shown that the host lattice structure constructed by urea molecules is essentially the same as that of urea-n-paraffin complex. Effects of the disorder structure of the guest on X-ray scattering of the complex are presented. However, there is a difficulty in identifying the disorder structure by X-ray analysis. With the aid of a potential energy calculation between the hexagonal urea tunnel and the guest molecule, a rotational disorder model is preferred.     

有机磷化物制备羟基磷灰石工艺条件的探讨

探索用有机磷化物制备羟基磷灰石的工艺条件：采用硝酸钙、氨水、磷酸三丁酯为原料进行正交对比研究，优化得到了制备较佳羟基磷灰石的工艺条件。优化的工艺条件为：原料中Ca／P（molar ratio）1．67；Ca（NO3）2、4H2O／NH3H2O（g／g）为0.99；烧结温度为850℃：恒温时间为5h，并对合成的样品进行了化学和红外光谱的分析。     

A helical drive in-pipe robot based on compound planetary gearing

The modern society is fuelled by very comprehensive grids of gas and liquid pipelines. In recent years, various in-pipe robots have been developed for inspection and maintenance tasks inside such pipes. In this paper, a novel in-pipe robot is proposed and developed for gas/oil well interventions at thousands of meters downhole. Due to the nature of such intervention, in-pipe robot design must be capable of carrying a very large payload, as large as 2500?N inside a pipe with diameter as small as 54?mm. The proposed design concept is based on a compound planetary gearing system. One of the major novelties of this design is the use of pipe wall as a ring gear for one stage of the compound planetary gear system; the other novelty is the generation of helical angle when the planetary gears are expanded to press on the pipe wall. The proposed concept is compact, efficient, and has never been reported before. In this paper, the helical angle, the velocity, and load capability of the proposed system will be analyzed. The load transportation capability of the proposed robot is also measured based on an experiment. Initial data have shown great potential in carrying large payloads.     

PE-LLD／EVA／Mg（OH）2／复合阻燃剂高效无卤阻燃体系的研究

采用线形低密度聚乙烯/乙烯-醋酸乙烯共聚物作为复合材料主体,表面处理过的氢氧化镁(Mg(OH)2)为主阻燃剂,以微胶囊化红磷和自制硅类阻燃剂为核心的复合阻燃剂为阻燃增效剂,重点探讨了Mg(OH)2和复合阻燃剂的阻燃效果。结果表明,Mg(OH)2与复合阻燃剂并用具有良好的协同效应,当Mg(OH)2用量40份,复合阻燃剂5～7份时,可获得较高的氧指数,垂直燃烧试验通过FV0级,且材料抗静电能力提高,力学性能、加工性能较好。     

The preparation of coupled WO3/TiO2 photocatalyst by ball milling

The coupled photocatalyst WO₃/TiO₂ is prepared by ball milling by doping WO₃ into TiO₂ and using H₂O solution as disperser. The coupled photocatalyst WO₃/TiO₂ is characterized by UV–VIS diffuse reflection spectrum, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD) and Transmission electron microscopy (TEM). The results show that the optimum percentage of WO₃ doped is 3% and that the photocatalytic activity of the coupled WO₃/TiO₂ photocatalyst is much higher than that of TiO₂ and WO₃–TiO₂ with no ball milling. Compared with TiO₂, the photoexcited wavelength range of the WO₃/TiO₂ photocatalyst red-shifts about 50 nm, and the light absorption intensity is also improved. The crystal phase of TiO₂ is not changed and new crystal phases are not found during the process of ball milling. WO₃ and TiO₂ coupled highly, forming the WO₃/TiO₂ photocatalyst. The increased photocatalytic activity of the coupled photocatalyst may be attributed to the enhance charge separation efficiency and the extend wavelength range of photoexcitation.     

磷钨杂多酸催化乙醇和乙酸酯化反应的研究

以多孔钛片为支撑体,制备了磷钨杂多化合物薄膜化催化剂。在膜催化器上,考察了薄膜化催化剂对乙醇和乙酸合成乙酸乙酯的催化性能。结果表明,薄膜化催化剂显著提高了催化活性;当n(乙醇)∶n(乙酸)=1.5∶1,原料流量2.55mL/h;在反应温度为110℃时,乙酸乙酯产率可达97%,且薄膜催化剂的处理很方便,不污染环境。     

负离子分解室内有机化合物的测试

低浓度、高毒性的挥发性有机化合物(VOC)污染大气,造成“病态建筑综合症(SBS)”,严重威胁着人们的身体健康。空气中的负离子除有利于人体生理健康以外,还能有效分解空气中的VOC。将一种负离子添加剂添加到墙体涂料中,可以得到一种能有效释放负离子的涂料。本文测试了涂刷负离子添加剂涂料的测试小室中负离子分解总挥发性有机化合物(TVOC)及甲醛的性能,结果证明:涂料释放的负离子能有效分解VOC,使室内VOC的浓度在较短时间内满足GB/T—18883—2002的要求。     

新型环氧防腐涂料的研究

采用在环氧树脂中加入纳米复合铁钛粉防锈颜料WD—D-325、固化剂、制备了新型环氧树脂防腐涂料。由于纳米技术的特性，该防腐涂料具有较高的防腐性、优异的附着力和柔韧性。实验确定了复合铁钛粉防锈颜料在环氧防腐涂料中的添加量。作为新型的环保颜料，复合铁钛粉防锈颜料可以替代红丹、锌铬黄等颜料。     

带取代基硝酮化合物光环化反应的研究

本工作合成了一系列取代的硝酮类化合物。其中部分化合物仅一侧的苯环上带有取代基,而另部分化合物则两个苯环上均带有取代基。研究工作表明:取代基处于一侧的硝酮类化合物,不论取代基是给出电子或接受电子的,均有利于化合物光环化反应的进行。而当两个苯环分别带有给电子及接受电子的取代基形成推拉结构时,则大大减弱了化合物光环化反应的发生。文章对上述结果进行了初步讨论。     

锌基水系复合涂层——达克罗表面处理技术

介绍了锌基水系复合涂层——达克罗表面处理技术的抗蚀机理和优异性能。