顶部定常吸气对高层建筑模型气动力的影响

为减少高层建筑受到的风荷载,提高高层建筑抗风性能,提出一种顶部吸气的主动控制方法。在一高宽比为H/d=5的正方形截面柱体的高层建筑模型上,通过在其顶部前边缘开设狭缝进行吸气来实现流动控制。通过风洞试验研究了顶部吸气对气动力与顶部分离流的影响.利用流动可视化与流场测试结果揭示了顶部狭缝吸气的控制机理.实验对比了不同吸气系数Q(=U/U_∞,U为狭缝吸气速度)对气动力控制效果的影响,并对Q=0,1和3的三种工况下风压分布与顶部剪切流进行了详细对比.研究发现狭缝吸气改变了顶部分离流特性,并对模型所有高度上的气动力均有显著影响.Q=1时控制效果最佳,脉动阻力与脉动升力分别减小17.8%和45.5%.此时顶面分离流被削弱并伴随有再附现象且湍流强度较大,最有利于顶部剪切流与尾流间的动量交换,从而削弱柱体展向涡脱落与脉动气动力.     

大内跨小边跨框架结构预应力筋优化布置方法

预应力筋的优化布置是大内跨小边跨的多跨预应力混凝土框架结构合理设计计算的关键.为满足控制截面承载力最大的需要,以往常将大跨所需预应力筋布置为连续曲线,并按水平直线延伸通过其相邻的两小跨,按这种布置方式仅使大跨内产生竖向向上的预应力等效荷载,可较好平衡大跨的竖向外荷载;而若将大跨及相邻的两小跨统一考虑,预应力筋按连续曲线布置,张拉产生的预应力等效荷载不但可有效平衡大跨的竖向外荷载而且也可平衡小跨的竖向外荷载,可以使荷载平衡得到优化实现.以一典型工程为例,分析了在相同条件下两种预应力筋布置过程中张拉引起的综合弯矩、主弯矩和次弯矩的分布和量值上差异,比较了两类布筋形式对正截面承载力计算结果的影响,验证了对大内跨小边跨框架结构统一考虑后整体上按三段连续正反抛物线预应力筋布置的合理性.     

Evaluation research on applicability of rapid iodide migration test

The applicability of the rapid iodide migration test was systematically studied. Comparative experimental tests of different test conditions, including several external voltages, test durations, concrete ages and mixing proportions, were carried out to make clear the transport behaviors of iodide under parallel electric fields. Numerical simulations were also done using the finite element method to found the correlation between chloride and iodide transport behaviors. The test and numerical results show that the chloride transport behaviors of RIM and RCM tests have a good correlation under the several conditions used in the present paper. Moreover, the influence of external conditions （external voltages, test durations） on the test results is small. Thus, it can be concluded that the RIM method is available to determine the chloride penetration resistance of the chloride-eroded structural concrete.     

混凝土尿素池的腐蚀及防腐蚀措施

本文对混凝土尿素池的腐蚀原因、规律及影响因素进行了阐述，提出了混凝土尿素池的腐蚀及防腐蚀措施，延长了设备的寿命，保证了尿素生产的正常运转。     

Flow of gas-liquid-solid system and its application in packed flotation column

A packed flotation column, which is packed with multiple board ripple packings, was described. Based on comprehensive steady state models, chemical reactor developed previously in chemical engineering subjects, have been extended to packed flotation column for mineral separation. The experimental results verify that tarts in series model is better than axially-dispersed plug flow model to describe flow pattern in the collection zone of column by RTD (residence time distribution), and the error of experimental data and calculated data of both models are 0. 07 % - 0. 1% and 0. 18 % - 0.45 % respectively. And, RTD of gas phase was also considered, results also show that gas in the whole column appears plug flow. The cleaning process through adding wash water in froth zone of column was described, and the effect of superficial air vdodty and superficial wash water vdocity on the cleaning action of froth zone were discussed. Flotation experiment for single column was conducted for phosphate ores. The recovery for P2Os was 85.8%, and the grade was 26.8%.     

A new high accuracy method for two-dimensional biharmonic equation with nonlinear third derivative terms: application to Navier–Stokes equations of motion

In this paper, we propose a new compact fourth-order accurate method for solving the two-dimensional fourth-order elliptic boundary value problem with third-order nonlinear derivative terms. We use only 9-point single computational cell in the scheme. The proposed method is then employed to solve Navier–Stokes equations of motion in terms of streamfunction–velocity formulation, and the lid-driven square cavity problem. We describe the derivation of the method in details and also discuss how our streamfunction–velocity formulation is able to handle boundary conditions in terms of normal derivatives. Numerical results show that the proposed method enables us to obtain oscillation-free high accuracy solution.     

基于逻辑回归模型的木片和树皮的图像识别

为了提高木片生物能的利用率,需要除去木片中的树皮杂质。识别木片和树皮的图像对于实现二者分离具有重要作用。提出一种基于逻辑回归模型来对木片和树皮进行图像识别的算法。算法流程包括计算各种可以描述木片和树皮纹理的参数,利用SAS统计分析出最佳参数,将最佳参数计算所得的样本数据用于SAS LOGISTIC过程得到预测方程,再将预测方程用于逻辑回归模型来实现木片和树皮的图像识别。通过实验可知,最佳参数为灰度方差,该图像识别算法的正确率能达到97.4%。     

一种相控阵天线安装精度检测与校准

文中论述了一种相控阵雷达天线安装后的精度检测方法。按照雷达天线安装后的几何形态,采用光学测量仪器进行相关的数据采集,建立检测的数学模型,利用线性回归法以及最小二乘法进行数据拟合,计算出安装后雷达天线底面与水平面的最大夹角和天线边缘与正北方向的夹角,并进行了试验误差评估和分析,依据检测数据对雷达天线的水平和方位角度进行校...     

统计过程控制(SPC)在龙滩水电站混凝土生产质量控制中的应用

混凝土生产工艺流程复杂,控制工序多,生产过程除易受系统因素影响外,还受随机因素的干扰较大,生产质量不易控制,本文应用统计过程控制(SPC)在龙滩水电站混凝土生产中的质量控制实践来谈点初浅的认识.     

图像处理建立混凝土有限元模型探讨

针对工程中常用的混凝土材料的不均匀特性,提出了一种基于图像处理技术建立二维混凝土有限元模型的方法.该方法综合图像处理过程中的图像增强、消除噪声和边缘检测技术建立人机对话平台,并结合网格自动划分技术建立非均匀有限元模型.通过一个实例,验证了该方法的有效性.