喷码机油墨压力的模糊PI控制系统设计

针对喷码机油墨压力控制存在时滞性的特点和现有的油墨压力控制系统控制参数不易调节、调节时间过长、抗干扰能力不强等问题,结合模糊控制器和PI控制器两者的优点,设计并实现了一个模糊PI双模控制器对油墨压力进行调节。实际测试结果表明:与现有的油墨压力控制系统相比,设计的模糊PI控制器能够有效地对油墨压力进行控制,超调量较小,调节时间较短、控制精度及抗干扰均取得了较好的效果。     

基于图像分析的数字化油墨预置技术

针对印刷数字化流程中的油墨预置技术,提出一种基于图像分析的油墨预置技术。选择RIP(Raster Image Processor)后的1bit TIFF图像为基础数据,提取各墨区对应的网点面积率;建立了网点面积率和墨键开度的数学模型,并采用最小二乘法求解模型参数,从而实现油墨预置。实验结果表明,所求取的油墨预置量可以较好地拟合原来的数据,采用该技术可以提高印刷工作效率,减少印刷浪费。     

聚乙烯／膨化石墨导电复合材料的研究

研究了不同的工艺条件对聚乙烯/膨化石墨导电性能和力学性能的影响。结果表明，溶液插层法具有较低的导电渗滤阈值，但其力学性能也较差。     

聚乙烯钢塑复合管导热系数的测定

聚乙烯钢塑复合管是新一代替代传统管道的新型管材，其导热系数的测试及相关的数据目前还没有报导。本文利用一维、稳态传热的基本规律，采用相对简单易行、测试成本低、较能真实反映实际情况的测试装置，对成都某企业的聚乙烯钢塑复合管导热系数进行了测试，获取了较满意的测试结果，并对测试结果的准确性进行了分析。所采用的测试方法及所获取的数据，对相应的生产厂家、设计、施工单位具有一定的指导意义。     

烧成温度与导电陶瓷电性能关系的研究

本文通过X—射线衍射分析及阻温特性别定等方法研究了SnO2导电陶瓷的晶相组成和电性能与烧成温度的关系。结果表明，随烧成温度提高试样中SnO2金红石型晶体的含量有所增加，试样的材料常数和活化能降低，材料导电性能增强，同时还对导电陶瓷的导电机理进行了探讨。     

油墨与纸张接触的瞬间

油墨的吸收性是印刷质较短的时间尺度上分析油墨与纸张的接触过程,从而建立模型.探讨油墨吸收性对印刷质量的影响,并提出解决办法.     

Set up of a Screen-Printing Procedure for the Production of a β Alumina-Based Gas Sensor*

A gas sensor based on a -alumina thick film was recently developed on a laboratory scale. This sensor can be successfully used for selective detection of CO and NO_x, resulting from an appropriate choice of the working temperature of the sensing element. This paper deals with the approach of the industrial transfer of the sensor prototype, mainly concerning the scale-up of the screen-printing procedure from a hand-operated apparatus to an industrial production machine. Many parameters were already investigated during the laboratory development, namely the ink composition in terms of organic/inorganic component ratio, the type and amount of the liquid dispersant and rheological agent, the composition and softening temperature of the binder, the -alumina/binder weight ratio. During the industrial transfer, some other parameters must be considered, such as the particle size distribution of the ceramic components of the ink, the influence of the mesh number of the screen fabric on the surface texture of the -alumina film, the viscosity performances of the ink as a function of the applied shear rate and ageing. A common commercial metallic paste was also used as reference for optimizing the characteristics of the -alumina based ink.     

洁净核能系统边耦合质子直线加速器的设计

洁净核能系统的强流连续波质子直线加速器常温腔方案中,高能段采用边耦合加速结构（ＯＣＬ）,频率为７００ＭＨｚ,工作模式为π／２模。ＣＣＬ把来自耦合腔漂移管加速器（ＣＣＤＴＬ）的３０ｍＡ、８０ＭｅＶ的质子束加速到１ＧｅＶ。ＣＣＬ段总长１０６４ｍ,采用ＦＯＤＯ的横向聚焦结构,聚集周期长度为８βλ,腔的束孔道半径为２．００、２．２５、２．５０ｃｍ。用ＳＵＰＥＲＦＩＳＨ优化腔,给出了计算结果,同时给出了能量     

Current–voltage characteristics of AlCdO Schottky contact on the polished and unpolished p-type Si surfaces with and without light illumination

In this study, the current-voltage characteristics of the AlCdO/unpolished p-type Si and AlCdO/polished p-type Si Schottky diodes with and without light illumination were examined. It is found that the Schottky barrier height (the series resistance) of the AlCdO/unpolished p-type Si Schottky diode is higher (lower) than that of the AlCdO/polished p-type Si Schottky diode. The power conversion efficiency of the AlCdO/p-type Si devices in the light (AM 1.5 G, 100 mW/cm²) was improved by increasing built-in potential at the AlCdO/p-type Si interfaces and reducing the device series resistance and surface reflectivity. It is shown that the device surface roughness plays an essential role in improving the device performance.     

夹层压电复合材料的研究

使用碳黑／Ｐ（ＶＤＦ－ＴＦＥ）导电复合材料与０－３型ＰＺＴ／Ｐ（ＶＤＦ－ＴＦＥ）压电复合材料进行二次结构复合,形成夹层压电复合材料,对其压电性能进行了分析测试。研究结果表明,夹层压电复合材料的压电系数（ｄ３３、ｄ３１）比原单层０－３型ＰＺＴ／Ｐ（ＶＤＦ－ＴＦＥ）压电复合材料有明显提高。此外,从理论上分析说明了其压电系数提高的原因在于夹层压电复合材料受到外部应力作用时,产生了内部应力。