Bicriteria scheduling of a material handling robot in an m-machine cell to minimize the energy consumption of the robot and the cycle time

This study considers a flowshop type production system consisting of m machines. A material handling robot transports the parts between the machines and loads and unloads the machines. We consider the sequencing of the robot moves and determining the speeds of these moves simultaneously. These decisions affect both the robot’s energy consumption and the production speed of the system. In this study, these two objectives are considered simultaneously. We propose a second order cone programming formulation to find Pareto efficient solutions. We also develop a heuristic algorithm that finds a set of approximate Pareto efficient solutions. The conic formulation can find robot schedules for small cells with less number of machines in reasonable computation times. Our heuristic algorithm can generate a large set of approximate Pareto efficient solutions in a very short computational time. Proposed solution approaches help the decision-maker to achieve the best trade-off between the throughput of a cell and the energy efficiency of a material handling robot.     

Correlation properties of combiners with memory in stream ciphers

For pseudo-random generators where one or several LFSRs are combined by a memoryless function, it is known that the output sequences are correlated to certain LFSR-sequences whose correlation coefficients c _t satisfy the equation _i c ₂ ⁱ = 1. In this paper it is proved that a corresponding result also holds for generators whose LFSRs are connected to a combiner with memory.If correlation probabilities are conditioned on side information, e.g., on known output digits, it is shown that new or stronger correlations may occur. This is exemplified for the summation cipher with only two LFSRs where such correlations can be exploited in a known plaintext attack. A cryptanalytic algorithm is given which is shown to be successful for LFSRs of considerable length and with arbitrary feedback connection.A preliminary version of this paper was presented at Eurocrypt '90, May 21–24, Århus, Denmark, and has appeared in the proceedings, pp. 204–213.     

Citations do not solve problems.

D. T. Cambell and D. W. Fiske (1959) made the now-obvious statement that measures of the same variable made by different methods should agree (converge) and certainly should agree better than measures of different variables made by those several methods. Almost everyone accepted that statement, yet the multitrait–multimethod matrices published today show little or no improvement over the published examples cited in 1959. The article raised the conceptual problem of how a variable and its measurement should be linked and the methodological problem of clarifying the nature of methods and their effects. Given these unresolved problems, it is perhaps not surprising that the question of the appropriate statistical analysis of these matrices has also no consensual answer. Perhaps methods and traits or contents are so thoroughly intertwined that their interaction cannot be adequately analyzed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Majority gates vs. general weighted threshold gates

In this paper we study small depth circuits that contain threshold gates (with or without weights) and parity gates. All circuits we consider are of polynomial size. We prove several results which complete the work on characterizing possible inclusions between many classes defined by small depth circuits. These results are the following:

基于行人下肢防护的前保险杠改进分析

利用有限元方法,建立了小腿冲击器与汽车前部结构的碰撞模型,用以评价某款车保险杠系统对小腿损伤的影响。通过增加吸能部件、副保险杠加强板等方式减轻行人下肢的损伤,并通过正交试验设计研究了吸能部件的材料、吸能部件前后面之间的距离、副保险杠加强板的厚度以及副保险杠加强板前后面之间的距离对行人下肢损伤的影响。研究结果表明,经正交试验设计后的前保险杠系统能有效地减小小腿冲击器的胫骨加速度以及膝关节弯曲角度,使得下肢保护指标满足Eu-roNCAP法规要求。优化设计后的前保险杠系统更好的防护行人下肢的损伤。     

双参数Bézier曲线的升二次扩展

本文以二次Bernstein基函数为例,首次提出了含双参数基函数的新扩展——αβQ—Bern-stein基函数,此类基函数具有新的特点,即基函数的扩展次数一次性升高两次,且包含了二次多项式和带一个参数的三次多项式基函数的所有性质。基于这组基函数定义了αβQ—Bézier曲线,该曲线也含有参数,具有形状可调性,当α与β取某些值时曲线能达到C4连续或在某个端点处C0连续。最后与含两个参数的升一次Bézier曲线进行比较,该曲线具有调节范围广、灵活性更强的优势。     

欠驱动异构式下肢康复机器人动力学分析及参数优化

针对现有外骨骼机器人人机自由度不匹配和关节对中性差的问题,提出欠驱动下肢康复机器人. 欠驱动机器人只有4个直线驱动,驱动的直线运动通过推杆和人机连接机构转化为人下肢在矢状面内的屈伸运动,带动人体进行步态康复训练. 建立机器人系统的人机耦合模型,进行模型的动力学分析,对人机耦合模型中影响动力学结果的参数进行分析,建立驱动力与肢体推动力之间的关系模型,并以推力系数最大为目标进行参数分析与优化,得到最佳的结构参数. 根据优化后的结构参数搭建康复机器人实验系统,对髋、膝关节驱动力与角度进行对比. 实验结果表明最大髋关节角度误差为2.9°,最大膝关节角度误差为6.4°,最大误差均约为9%,验证了动力学模型和参数优化结果的正确性.     

基于GWO-SVM的下肢假肢穿戴者骑行相位识别

针对下肢假肢穿戴者骑行相位识别的问题,提出基于灰狼算法优化的支持向量机(GWO-SVM)分类模型. 建立下肢多源信息系统,采集膝关节、踝关节的加速度信号以及膝关节角度信号. 应用奇异值分解,对采集到的信号进行降噪处理. 在对信号进行降噪处理之后,为了避免单一信号不确定的影响,从数据冗余角度,选取各信号的特征点,开展归一化处理,组成多维特征向量,作为SVM分类模型的输入. 为了能够进一步提高分类精度,加强全局优化能力,利用GWO算法对核参数进行优化. 通过与PSO-SVM分类模型、GA-SVM分类模型对比表明,基于GWO优化的SVM分类模型对骑行相位的识别率为94%,高于其他方法优化的SVM分类模型.     

浅析科技英语中词义的汉译

通过实例阐述了在进行科技英语的汉译时,只有根据原文的专业、行业、技术内容、词的本义和可能的引伸义,结合词的上下文语境,才能准确、恰当地确定英语词义的汉译。文章指出明白通畅、浅显易懂、准确的词义是科技英语汉译成功的基础。     

变薄拉伸工艺中凹模锥角的计算机模拟优化

在分析了变薄拉伸工艺应力性质的基础上 ,应用有限元模拟软件定量地分析了凹模锥角对拉伸工艺的影响 ,并给出了凹模锥角的合理范围 ,从而为优化模具设计 ,合理制定工艺提供了可靠的参考依据