Time-optimized contextual information forwarding in mobile sensor networks

We study on the forwarding of quality contextual information in mobile sensor networks (MSNs). Mobile nodes form ad-hoc distributed processing networks that produce accessible and quality-stamped information about the surrounding environment. Due to the dynamic network topology of such networks the context quality indicators seen by the nodes vary over time. A node delays the context forwarding decision until context of better quality is attained. Moreover, nodes have limited resources, thus, they have to balance between energy conservation and quality of context. We propose a time-optimized, distributed decision making model for forwarding context in a MSN based on the theory of optimal stopping. We compare our findings with certain context forwarding schemes found in the literature and pinpoint the advantages of the proposed model.     

软件定义网络中交换机处理时延的仿真

针对目前的网络仿真工具在对软件定义网络(SDN)的仿真过程中,未考虑交换机的处理时延的问题,提出一种处理时延的仿真方法,目的是为了使仿真结果更加真实和准确。该方法首先将交换机的转发处理过程分解为对流表的查询操作和执行不同的动作;然后,利用交换机的处理器频率和访存周期,将查询流表和执行动作转换为处理时间。实验中测量了真实环境中不同配置的交换机处理时延,并与利用该方法仿真出的处理时延进行对比。实验结果表明,利用该方法仿真出的处理时延和真实交换机的处理时延基本一致,该方法能够较准确地仿真交换机处理时延。     

基于Zig Bee技术的智能调光开关设计

根据智能家居的发展方向和用户需求,设计了一种基于Zig Bee技术的智能调光开关系统。设计方案采用新一代SOC芯片CC2530作为系统的无线收发模块,使得模块具备成本低、功耗小、高可靠、自组网、超视距通信等能力。采用ARM7嵌入式处理器LPC2132作为系统的微控制器模块,简化设计提高可靠性,使得系统具备分布处理能力。通过检测市电的过零点,开启延时定时器,定时器超时后触发双向可控硅导通的时间点来达到调光的目的。结果表明:本设计能够使家居照明系统更具可控性,更节能,使得家居环境更加舒适。     

基于带缓冲的双通道开关技术的网络隔离器设计

在对网络隔离技术进行分析的基础上,研究利用网络隔离技术来解决网络安全问题。目前的网络隔离产品大多是采用基于硬件的开关控制,受限于现有硬件技术条件,并且厂家要根据不同用户要求而开发生产针对特定应用的网闸,不能方便地同时支持多种应用。提出了一种改进的安全隔离网闸实现方案。重点是模块化和软件方式实现开关技术,采用独立的软件开关控制和模块化设计,解决了现有物理隔离网闸产品在硬件开关控制和所支持应用上的限制,这种采用软件实现开关功能的方式避免基于现有硬件技术的可用性和寿命时间的限制。     

Context-aware adaptive IP mobility anchoring

The novel distributed mobility management trend is a promising direction to cope with the increasing mobile data traffic and flatten network architectures. Most of the novel mobility approaches distribute the mobility anchors through the access level, as opposed to the centralized mobility anchoring model. Other recent approaches argue that mobility anchors closer to the content servers may be the solution to optimize the mobility performance. However, none of the mobility anchoring models is ideal for all scenarios, since it depends on the user, the session and the network. Hence, we propose an IP mobility approach driven by the context of the user, sessions and the network, where the mobility anchors for IP address allocation and for routing/forwarding are distributed through the network nodes, while the mobility context is managed by the mobile devices. Although each session is properly anchored in the establishment phase, the routing/forwarding is adapted over time, according to the user, the session and the network context: the proposed approach is able to signal different mobility anchors to optimize the routing path to new and ongoing sessions of the user. The outcome of the evaluation shows that the proposed approach overall reduces the data cost, the data delay, the tunneled packets and the tunnel length, when compared with other anchoring models.     

企业网络交换机配置文件的批量备份

交换机配置文件的备份是网络维护工作的一项重要内容,大型企业网中一般有不同规格型号的交换设备数百台,使得手动备份的工作相当繁琐。为解决交换设备配置文件批量和自动备份问题,使用Visual Basic.开发的一个运行在WIN DO WS环境下的软件,利用交换机备份数据表、Win Sock控件和Do Event函数等,有效地进行批量工作,并得到了较好的应用效果。     

程控多路宽电压通道切换电路设计

为克服传统校验方法的不足,简化自动化测试设备的面板设计和校验过程,基于单片机技术和RS-422通信接口,设计了一种程控多路宽电压通道切换电路。介绍了电路工作原理、元器件选择、软硬件设计过程。该电路已经在多台测试设备的校验环节得到应用,工作性能稳定。     

乙酸乙酯与乙酸正丙酯的切换式连续生产

作者在对乙酸乙酯、乙酸异丙酯、乙酸正丙酯和乙酸丁酯的现有生产工艺进行分析后,以乙酸乙酯和乙酸正丙酯为研究对象,在以往对两者研究的基础上,提出了乙酸乙酯与乙酸正丙酯切换式连续生产的工艺流程,并且通过模拟计算和小试验证证明,在同样的生产装置上,可以分别连续生产乙酸乙酯和乙酸正丙酯,采用该工艺生产乙酸乙酯能耗低于传统工艺12%,生产乙酸正丙酯比原有工艺可以提高收率2%。     

沿海电厂露天布置循环水泵出口液控蝶阀的可靠性优化

循环水泵出口液控蝶阀关系到循环水泵自身乃至整台机组的安全运行。但露天布置的液控蝶阀跟传统室内布置的液控蝶阀比,其运行环境比较恶劣,对系统的安全投运带来许多隐患。针对浙江大唐乌沙山发电厂出现的问题,本文从热控角度提出选型、安装、维护等方面的几点建议。     

基于S120变频器的转炉倾动主从控制设计及应用

随着SINAMICS S120在工控领域的应用,越来越多的成功应用案例随之产生,主从控制方案就是一个典型的案例,在许多工业领域得到了应用.本文主要介绍了转炉倾动控制系统的主从控制方案设计,实现变频器主从自动切换的调试过程及注意事项.