焊前处理方式对LF6铝合金扩散焊的影响

利用Ｇｌｅｅｂｌｅ－１５００热／力模拟试验机，研究了ＬＦ６铝合金的扩散焊工艺，通过对焊接温度、压力、时间的调整和选用不同的料前处理方法，确定了最佳的扩散规范，研究结果表明：在一定的温度和时间范围内，ＬＦ６５铝合金扩散焊接头的剪切哟度随焊接温度和时间的增加而提高；化学浸蚀法比机械打磨法能更有效的去除铝合金表面的氧化膜；在现有试验条件下，得到ＬＦ６铝合金扩散焊的最佳规范参数，搭接试扩散焊接头的剪切强度     

二进制分辨矩阵在连续属性约简中的研究

针对二进制分辨矩阵无法处理连续型数据,提出一种基于邻域的改进二进制分辨矩阵及其属性约简方法。实验结果表明,与先数据离散化,后属性约简的方法相比,利用文中方法提取出的特征属性的分类能力更高。     

不确定移动对象概率Skyline集的查询更新

Skyline查询的研究已从传统的静态Skyline操作延伸到动态的、不确定数据集上的Skyline查询和计算上。研究了移动环境下,查询点位置固定、目标点处于运动状态并且位置不确定情况下的连续概率Skyline计算问题。这个过程中,移动对象与查询对象之间的距离随时间不断变化。移动对象由于其运动状态导致位置无法精确定位,因此移动对象之间的支配关系只能采用概率形式表示,且随时间不断变化。给出了移动对象间的支配概率的定义,以及移动对象Skyline概率的定义,并定义了触发事件来记录对象支配概率发生变化的时刻,实现概率Skyline计算的连续跟踪和动态更新。提出了基于事件触发的连续概率Skyline查询算法(event triggered continuous probabilistic Skyline query for uncertain moving object,U-ECPS),对移动环境下的Skyline集进行连续查询和更新。大量的实验结果验证了U-ECPS算法的有效性。     

宁夏汉延渠灌区灌溉水利用系数测算分析与评价

农田灌溉水利用系数表示从水源引水被农作物吸收利用的过程,是反应灌区灌溉用水效率的一项指标。本文以汉延渠灌区为例,综合考虑宁夏的气候环境、土壤类型、灌溉制度及作物种植结构等因素,选取典型渠段和样点灌区,分别采用"连乘法"和"首尾法"计算宁夏汉延渠灌区2018—2019年的灌溉水利用系数,并对其进行对比分析评价,从而确定灌区适宜的计算方法。     

热喷焊技术在导板强化中的应用

用氧化乙炔焰热喷焊技术对普碳钢导卫装置进行表面强化，制成复合材导卫以替代高碳高合金导卫，取得较好效果。     

齿轮类零件电子束焊接结构的合理性分析

综述了齿轮类传动零部件采用电子束焊接加工的优越性，指出零件在不同结构尺寸、不同使用环境以及不同工艺状态下应选用与电子束焊接工艺相适应的焊缝结构，并对不同零件的焊缝接头结构形式的合理性进行了深入分析。     

Material flow and microstructure in the friction stir butt welds of the same and dissimilar aluminum alloys

The material flow and microstructural evolution in the friction stir welds of a 6061-Al alloy to itself and of a 6061-Al alloy to 2024-Al alloy plates of 12.7 mm in thickness were studied under different welding conditions. The results showed that plastic deformation, flow, and mechanical mixing of the material exhibit distinct asymmetry characteristics at both sides of the same and dissimilar welds. The microstructure in dissimilar 6061-Al/2024-Al welds is significantly different from that in the welds of a 6061-Al alloy to itself. Vortex-like structures featured by the concentric flow lines for a weld of 6061-Al alloy to itself, and alternative lamellae with different alloy constituents for a weld of 6061-Al to 2024-Al alloy, are attributed to the stirring action of the threaded tool, in situ extrusion, and traverse motion along the welding direction. The mutual mixing in the dissimilar metal welds is intimate and far from complete. However, the bonding between the two Al-alloys is clearly complete. Three different regions in the nugget zone of dissimilar 6061-Al/2024-Al welds are classified by the mechanically mixed region (MMR) characterized by the relatively dispersed particles of different alloy constituents, the stirring-induced plastic flow region (SPFR) consisting of alternative vortex-like lamellae of the two Al-alloys, and the unmixed region (UMR) consisting of fine equiaxed grains of the 6061-Al alloy. Within all of these three regions, the material is able to withstand a very high degree of plastic deformation due to the presence of dynamic recovery or recrystallization of the microstructure. The degree of material mixing, the thickness of the deformed Al-alloy lamellae, and the material flow patterns depend on the related positions in the nugget zone and the processing parameters. Distinct fluctuations of hardness are found to correspond to the microstructural changes throughout the nugget zone of dissimilar welds.     

绝缘门极双极性晶体管（IGBT）在焊接逆变器中的应用

本文介绍绝缘门极双极性晶体管(IGBT)的基本结构、工作原理、开关特性以及在焊接逆变器中的应用。     

Ni－Fe－Cr－B－Si涂层超塑扩散焊接的强化效应及耐磨性

研究了Ｎｉ－Ｆｅ－Ｃｒ－Ｂ－Ｓｉ合金涂层超塑性扩散焊接及焊接后的强化效应。通过对涂层的组织结构分析、硬度及耐磨性能的测试表明，当基材（５ＣｒＭｎＭｏ钢）与涂层产生协调超塑变形时，涂层原颗粒间、涂层与基材结合界面完全焊合。超塑焊合后的涂层比高频重熔及火焰重熔涂层硬度（ＨＶ）提高１００－１５０，耐摩擦磨损性能提高３０％。指出，沉淀强化、细晶强化及晶内位错密度增加是引起涂层强化效应和提高耐磨性的主要因素。