多CPU控制器在大功率整流控制系统中的应用

介绍了利用多CPU来设计整流控制器，解决大功率整流装置产生的磁场对整流计算机控制系统产生的干扰。     

D级压力容器制造许可证鉴定评审中企业存在问题综述

阐述了在D级压力容器制造许可证取换证鉴定评审过程中,取换证制造企业存在的较为普遍的问题。     

An analysis,design and tuning of Cascade Control Systems in the presence of constraints in actuator and process outputs

In the presence of rate constraints in actuator, design of cascade controller based on the primary controller conditional integration can result into closed-loop system oscillations. Stability analysis, performed by the describing function technique and confirmed by simulation, demonstrates that the solution based on the Anti-Reset Windup Cascade Control System (ARW CCS) structure is successful. Design and tuning of the ARW CCS secondary controller is a standard ARW single-input single-output problem. In the present paper tuning is proposed for the ARW CCS primary controller. For the serial process modeling simple rules are derived and confirmed by experimental results, obtained on a drum type boiler of a 210 MWe lignite coal fired unit. General design of the ARW CCS is based on the parallel process modeling and optimization of the primary controller. Optimization is performed in the frequency domain, under constraints on the maximum sensitivity, multiplicative uncertainty bound and sensitivity to measurement noise. Simulation and experimental results on a laboratory thermal plant demonstrate effectiveness of the proposed optimization.     

SYNTHESIS OF ACICULAR GOETHITE PARTICLES BY OXIDATION OF AQUEOUS FERROUS HYDROXIDE SUSPENSION IN A BUBBLE COLUMN WITH DRAFT TUBE

Acicular goethite particles were synthesized by oxidation of an alkaline suspension of ferrous hydroxide using a bubble column with draft tubes of different diameters at a constant temperature of 40°C. The oxidation rate increased with decreasing draft tube diameter. The mean size based on the major axis of acicular particle decreased with increasing oxidation rate and decreasing draft tube diameter. The major axis was found to grow preferentially compared with the minor axis. The mean size of major axis was correlated well to the modified reaction rate defined as a product of the reaction rate per unit volume of the reactor multiplied by the ratio of the column diameter to the draft tube diameter, irrespective of the draft tube diameter.     

基于VB的球面网壳施工控制系统设计

根据球面网壳的施工特点,采用VB6.0编制了球面网壳施工控制系统。根据系统的数据特点,采用MicrosoftExcel作为数据库。使用OLE控件调用AutoCAD软件,绘制三维结构模型图。使用Image控件和Line控件设计工具栏。系统根据施工误差对施工时可能出现的问题进行预警,有利于提高球面网壳的施工质量。     

CDMA干扰对GSM系统的影响及消除方式

本文主要研究CDMA系统对GSM系统的上行干扰,通过实验以及理论计算分析CDMA干扰对GSM系统的影响,并结合天线隔离度分析两系统之间的安全距离.     

Decentralized weighted control for a class of large‐scale systems with multi‐modes

In this paper, the control synthesis problem for a class of large‐scale systems with multi‐modes that are called large‐scale switched systems is addressed. By introducing the concept of decentralized switching signal and the relevant decentralized average dwell time, the asymptotic stability and weighted ?₂ gain performance are investigated. It should be noted that the decentralized switching covers general switching cases for large‐scale switched systems, namely, it admits both time‐dependent switching signal and arbitrary switching signal blended in the decentralized switching. Then, on the basis of the analysis results, the decentralized weighted control scheme including state feedback controller gains and switching signals is studied. Several design algorithms are proposed to meet different controller design problems. Finally, numerical examples are provided to illustrate theoretical findings within this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

Control policies for an industrial acetylene hydrogenation reactor

This paper addresses the problem of finding optimal operational policies for an acetylene reactor for day to day operation. A lumped parameter model based on four main reactions is developed and used to examine the effects of the reactor manipulated variables on key reaction parameters. An optimal and a sub-optimal operational policy which minimize the ethylene loss over time are formulated and the solution techniques are presented. The results indicate that the reactor model is in good agreement with industrial plant data. The performance of the optimal control policy is very similar to the performance of the sub-optimal control policy. However, the sub-optimal formulation, while retaining the dominant features of the optimal response, reduces the computational requirements. Finally, some issues concerning the real-time implementation of an advanced acetylene reactor control scheme are presented. These include the estimation of the optimum regeneration cycle, a recursive model update algorithm, the process optimizer and their overall coordination. A preliminary analysis of the benefits associated with the advanced control scheme suggests a considerable reduction in the yearly ethylene loss.     

Experiments of a prototype wind-driven reverse osmosis desalination system with feedback control

A prototype wind-powered reverse osmosis desalination system was constructed and tested on Coconut Island off the northern coast of Oahu, Hawaii, for brackish water desalination. The system has four major subsystems: a multi-vaned windmill/pump, a flow/pressure stabilizer, a reverse osmosis module, and a control mechanism. The feedback control mechanism, developed by this study, allowed this prototype system to be operated satisfactorily under mild ambient wind of 5 m/s or less. No auxiliary power source was needed. The system operational data showed that at an average wind speed of 5 m/s, brackish feedwater at a total dissolved solids concentration of 3000 mg/1 and at a flow rate of 13 1/min could be processed by this system. The average rejection rate of this prototype system was 97% and the average recovery ratio was 20%. The energy efficiency of the system was measured at 3 5%, which is comparable to the typical energy efficiency of well-operated multi-vaned windmills. Generally, the system's energy efficiency decreases as wind speed increases.