The Problem of Estimating the Uncertainty of the Fixed Point Temperature Due to the Presence of Impurities

The main problems in estimating the uncertainty due to the presence of impurities in the material: the absence in the documents of a unique definition of the quantity being measured – the fixed point temperature, the lack of agreed methods of realizing the fixed points and the insufficient justification of the equations used for the estimate, are analyzed. The results of a measurement of the melting point of gallium are presented, which differ in the conditions in which they were realized – with one and two liquid-solid interfaces and different solidification conditions, are presented. The reasons for the considerable difference between the values of the temperatures obtained in these experiments are discussed.     

Vibrations of stretched damped beams under non-ideal boundary conditions

A simply supported damped Euler-Bernoulli beam with immovable end conditions are considered. The concept of non-ideal boundary conditions is applied to the beam problem. In accordance, the boundaries are assumed to allow small deflections and moments. Approximate analytical solution of the problem is found using the method of multiple scales, a perturbation technique.     

电脑—探针微孔测量方法研究

本文讨论了微孔自动化测量装置的原理与结构。电接触探针在微机控制下,在X方向找中心,在Y方向进行孔径测量。该系统不仅能实现测量过程自动化和测量结果自动显示,而且能自动消除测量工作台丝杠螺母反向间隙对测量精度的影响。     

Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates

Compression-after-impact (CAI) tests have been conducted for quasi-isotropic thick plates with 48 plies by using the NASA method and on plates with 32 plies by using the SACMA method. Specimens are made of CF/PEEK (APC-2) and conventional CF/epoxy for the NASA plates and CF/epoxy for the SACMA plates. In the NASA CAI tests, the sequence of delamination buckling and its propagation is clearly revealed through various experimental techniques. One major technique is moiré topography, and the other is thermo-mechanical stress analysis with a high-accuracy infrared sensor. The arrest of delamination propagation just before catastrophic failure due to high fracture toughness is clearly captured by the moiré camera. This behavior provides good CAI values of CF/PEEK. The initial buckling properties of the delaminated region by the impact are then extensively discussed. Numerical predictions of initial buckling stress have been obtained by modelled geometry of the delaminated region simplified from its precise structure clarified by ultrasonic C-scanning. They agree fairly well with the experimental results. The in-plane stress distribution in the delaminated region before initial buckling is measured by an infrared stress graphic system. This compared favorably with finite element predictions. Two types of symmetric buckling modes with respect to the central plate surface, twin and single peak ones, are experimentally captured.     

Influence of Gaseous Atmosphere on Morphology and Cellular Fatty Acid Composition of Campylobacter jejuni

ABSTRACT: We evaluated the effect of growth environment on morphology and fatty acid (FA) profiles of 2 strains of C ampylobacter jejuni (ATCC 29428 and 33560) grown under various gaseous conditions. Viable counts were determined by plate count and percentages of coccoid cells. FA profiles were measured by gas chromatography. Plate counts were lowest when cultures were grown in air and highest in CO₂ (10%), O₂ (5%), and N₂ (85%). For 29428, percentages of coccoid cells did not differ among treatments. For 33560, percentages of coccoid cells were greater than for 29428 and varied among treatments (13% to 87%). There were no significant ( P > 0.05) relationships between percentages of coccoid cells and amounts of individual or combinations of FA either between or within strains.     

Simulation of macroscopic material behavior for uniaxial fiber-matrix composites, using a DAE-approach

The macroscopic deformation behavior of a fiber-reinforced aluminum-boron composite is investigated. Different periodic and random arrangements of the microstructure are considered with macroscopic hardening behavior due to the evolution of plastic zones on the microscale being taken into account.

For the solution of the initial boundary value problem, a non-standard algorithm is applied. It consists of the direct solution of the whole set of equations, treating all variables as global quantities. Together with a higher order time integration method (BDF2), an automatic step size control is used in the FEM calculations.     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Are Samples in Randomized Controlled Trials of Psychotherapy Representative of Community Outpatients? A New Methodology and Initial Findings.

To determine the extent to which published randomized controlled trials (RCTs) of psychotherapy can be generalized to a sample of community outpatients, the authors used a method of matching information obtained from outpatient charts to inclusion and exclusion criteria from published RCT studies. They found that 80% of the patients in their sample who had diagnoses represented in the RCT literature were judged eligible for at least 1 published RCT; however, 58% of the patients had primary diagnoses such as adjustment disorder or dysthymia, which were not represented in the existing psychotherapy outcome literature. The most common reasons that patients in their sample did not match with published RCTs for psychotherapy are listed, and the implications of these findings for research and practice are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hypnosis and clinical pain.

Hypnosis has been demonstrated to reduce analogue pain, and studies on the mechanisms of laboratory pain reduction have provided useful applications to clinical populations. Studies showing central nervous system activity during hypnotic procedures offer preliminary information concerning possible physiological mechanisms of hypnotic analgesia. Randomized controlled studies with clinical populations indicate that hypnosis has a reliable and significant impact on acute procedural pain and chronic pain conditions, Methodological issues of this body of research are discussed, as are methods to better integrate hypnosis into comprehensive pain treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)