从供应商受益角度研究国际供应链合作关系

首先指出从供应商受益角度对国际供应链合作关系进行研究的重要意义，接着对国际供应链合作关系的起源及其概念界定进行了综合分析；其次对国际供应链战略伙伴关系下的供应商受益进行了相关研究结论的综合，并对我国供应商参与国际供应链合作的实际受益进行分析，然后将两者进行了比较，最后综合全文探讨得出本文研究的结论。     

带钢窄边线状裂纹缺陷的形成原因及预防措施

本文通过对带钢窄边线状裂纹缺陷的金相显微组织观察和扫描电镜与能谱分析，确定了带钢窄边线状裂纹缺陷的形成原因，并针对原因提出了相应的预防措施，有效地控制了带钢窄边线状裂纹缺陷的重复发生。     

数据库备份与恢复技术研究及应用

针对数据库备份、数据库恢复的概念、技术原理和方法等方面进行了分析和探讨。事实证明,通过借助于网络信息技术、数据库处理技术、网络存储等技术有助于实现企业信息系统的数据库备份与恢复。     

基于神经网络观测器的飞控传感器在线故障诊断

为提高无人机飞行安全可靠性,针对飞行控制系统中常出现的传感器故障以及非线性气动力模型参数难以确定的问题,提出了基于BP神经网络观测器估计的故障诊断方法;引用LM改进算法对网络参数进行调整,构造了神经网络观测器模型逼近非线性系统,并运用于飞行控制系统进行在线数字仿真,对垂直陀螺输出卡死故障、恒偏差故障和恒增益故障分别进行仿真分析;仿真结果表明,所设计神经网络观测器可以有效估计系统输出,在线诊断传感器故障。     

Group technology based adaptive cell formation using predator-prey genetic algorithm

In recent years, there has been a considerable growth of application of group technology in cellular manufacturing. This has led to investigation of the primary cell formation problem (CFP), both in classical and soft-computing domain. Compared to more well-known and analytical techniques like mathematical programming which have been used rigorously to solve CFPs, heuristic approaches have yet gained the same level of acceptance. In the last decade we have seen some fruitful attempts to use evolutionary techniques like genetic algorithm (GA) and Ant Colony Optimization to find solutions of the CFP. The primary aim of this study is to investigate the applicability of a fine grain variant of the predator-prey GA (PPGA) in CFPs. The algorithm has been adapted to emphasize local selection strategy and to maintain a reasonable balance between prey and predator population, while avoiding premature convergence. The results show that the algorithm is competitive in identifying machine-part clusters from the initial CFP matrix with significantly less number of iterations. The algorithm scaled efficiently for large size problems with competitive performance. Optimal cluster identification is then followed by removal of the bottleneck elements to give a final solution with minimum inter-cluster transition cost. The results give considerable impetus to study similar NP-complete combinatorial problems using fine-grain GAs in future.     

Internal-oxide-band formation during oxidation of Ag-Mg alloys

Ag-3a/oMg was oxidized in air over the range of 400–900°C. Internal-oxide bands of MgO formed approximately parallel to the surface, the first band appearing at some finite, but irregular depth below the surface. The region between the surface and the first band appeared to be free of precipitates, but TEM showed that very small clusters, about 50 Å in diameter, formed in the PFZ, causing significant hardness (greater than 300 VHN). The clusters contain more oxygen than that corresponding to stoichiometric MgO. The hardness between oxide bands was also high, but not as high as in the PFZ. The kinetics of thickening of the internal-band region followed the parabolic rate law between 400 and 700° C, with departures from the parabolic law occurring at higher temperatures. The activation energy for the parabolic rate constants was 19.4 Kcal/mol, a value less than the total for oxygen diffusion and oxygen dissolution. The reaction front was planar and parallel to the surface prior to band formation at temperatures of 400–600° C. Nucleation of the first band resulted in nonplanar and nonparallel oxide. Little or no correlation existed between grain boundaries and oxide formation. Nodules of virtually pure silver formed on the surface initially at grain boundaries and subsequently within grains. Nodule formation is attributed to stress-enhanced (resulting from strains associated with precipitation) diffusion of silver to the surface via dislocation pipes. Internal-band formation is discussed in terms of prior data in the literature and various models. It is thought that stress effects (induced by precipitation), nucleation, and clustering of oxygen with Mg play significant roles in causing internal-band formation.     

Modelling of the mist formation in a segmented grinding wheel system

It has been found that using a segmented grinding wheel with a fluid chamber can significantly minimise the quantity of coolant while improving the ground surface integrity. The present investigation aims to explore the fluid flow mechanism in such a wheel system. To this end, the Weber theory for Newtonian jet instability was applied to quantitatively determine the contribution of coolant flow rate to mist and ligament modes. A semi-analytical model was then developed to predict the mist flow rate by taking into account both the grinding parameters and fluid properties. It was shown that the model prediction was in good agreement with experimental measurements. Because of the comprehensive integration of variables in the formulation, the model provides a good fundamental understanding of the mist formation and offers a practical guideline for the selection and use coolant in minimising the mist flow rate.     

模具敏捷制造系统研究

针对模具设计制造过程复杂、条件苛刻和单件或小批量生产的特点 ,论述了模具产业发展敏捷制造技术的必要性。提出了模具敏捷制造系统框架和基于STEP与特征技术实现信息集成与过程集成的运行机制。阐述了基于Internet/Intranet的开放式可视化协同工作平台的模具敏捷制造实施方案。     

Electrochemically deposited polypyrrole films and their characterization

Ionically conductive polypyrrole films have been deposited at 295 K from anhydrous acetonitrile, acetonitrile/H₂O and NaBF₄ aqueous solutions onto platinum, mild steel and stainless steel discs, using cyclic voltammetry, potentiostatic and galvanostatic techniques. Cyclic voltammetry of the polymer films has been studied as a function of water content of the acetonitrile solvent, polypyrrole concentration and potential sweep rate. Potentiostatic growth of thicker (< 30 micron) films on stainless steel allowed free-standing polypyrrole membranes to be produced. Well adherent and conductive films were deposited at constant potential in stirred solutions from acetonitrile electrolytes containing 1% (v/v) of water. The membrane resistivity of the reduced films in 0.5 mol dm^− 3 KCl_(aq) at 295 K was ≈ 1 × 10⁶ Ω cm, while the resistivity of the oxidised membrane was 2700 Ω cm.     

铸钢件准固态区域应力,应变数值模拟及热裂机制

对ＺＧ４５实验热裂试棒的数种工况进行了应力－应变的数值模拟，对热裂形成机制进行了讨论。研究认为：热裂起源于Ｂｉｎｇｈａｍ体，是塑性变形超过Ｂｉｎｇｈａｍ体塑性储备值所致。