Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

我国炼油技术开发的若干思考与建议

分析了我国炼油工业面临的挑战，世界炼油工业的发展趋势，提出了我国炼油技术开发要围绕符合国情的清洁燃料生产技术，炼油与化工结合的炼油技术，适合现有炼油装置技术改造、提高技术水平，降低加工成本的技术，渣油转化技术，煤制油，天然气制油技术，炼油厂智能化的技术，减少炼油厂烟尘排放的技术等7个方面开展工作的具体建议。     

DFMC在水利机械产品开发中的应用研究

分析了DFMC(大规模定制设计)关键技术及相关技术,提出了运用该项技术开发产品企业应作好的前期准备,研究了水利机械产品"大型移动启闭机"的定制开发。     

从76届SEG年会看综合物化探技术的发展方向

文中在介绍76届SEG年会的展商、展台及会场专题报告与论文发布情况的基础上，阐述了参加本届SEG年会的体会，指出了重磁电技术发展的四个趋势：向海洋勘探技术方向发展、向复杂区综合勘探技术方向发展、向三维联合处理和三维可视化解释技术发展、向直接圈定和检测油气方向发展。     

新城金矿采场落矿控制爆破技术

新城金矿为蚀变岩型金矿床,由于受地质构造影响,顶板稳定性较差,局部和较大面积的顶板冒落现象时有发生,为了解决采场顶板安全问题和提高落矿主要技术经济指标而进行了“上向水平分层尾砂胶结充填法采场控制爆破技术”的试验研究工作,试验达到了预期效果。     

Development and implementation of a NURBS curve motion interpolator

This paper deals with the issues of development and implementation of a real-time NURBS interpolator for a six-axis robot. Using an open-architecture controller system as a testbed, a real-time NURBS curve interpolator was developed, implemented and tested. Sample runs were conducted with the resulting trajectories measured in real-time during robot motion. The resulting trajectories are analyzed, discussed and compared with those from a commonly used point-to-point approximation technique. The real-time NURBS curve interpolator's feasibility, advantages and related issues are also discussed.     

Monitoring water quality in reservoirs with IRS-1A-LISS-I

An attempt has been made to quantify the relationship between the variation in IRS-IA-LISS-I (Indian Remote Sensing Satellite-1A Linear Imaging Self-Scanning System) radiance data and field measured change in secchi disc depth. Secchi disc depth was measured for 47 predetermined sampling locations on reservoir surface water. At extinction depth (secchi depth), water samples were collected from all the sampling locations. Suspended sediments of eight locations representing various reaches of the reservoir were selected for mineralogical, particle size and optical properties analysis. The LISS-I radiance value in band 1 (0.45–0.52µm) band 2 (0-52–0.59 µm) and band 3 (0.62–0.68 µm) were used in a regression analysis. The absorption infrared band 4 (0.77–0.86 µm) was not included in the analysis. In these, the dependable variable was secchi depth (SD) and the LISS-I-radiance data was the estimator variable. Forty-seven data sets of 20 October 1988 from Tawa reservoir surface water were used to obtain an estimator equation for SD. The verification of the estimator equation was tested by applying it to a data set of 21 measurements of 28 September 1988 for this reservoir. The coefficient of correlation between observed and estimated values for the 28 September 1988 data set wasr=0.92 for SD, indicating that the equation could accurately predict the water clarity (SD) for this reservoir on new occasions from IRS-IA-LISS-I spectral data. It is shown that mineral composition and optical properties of suspended sediments influence the reflected radiance of water quality. It is concluded that IRS-IA-LISS-I data provide a useful means of mapping water quality in reservoir.     

国外柴油机用粉末冶金气门阀座概述

概述了国外粉末冶金气门阀座的制造工艺特点,简要介绍了国外柴油机用粉末冶金气门阀座材料的性能水平。     

Improved wetland remote sensing in Yellowstone National Park using classification trees to combine TM imagery and ancillary environmental data

The U.S. Fish and Wildlife Service uses the term palustrine wetland to describe vegetated wetlands traditionally identified as marsh, bog, fen, swamp, or wet meadow. Landsat TM imagery was combined with image texture and ancillary environmental data to model probabilities of palustrine wetland occurrence in Yellowstone National Park using classification trees. Model training and test locations were identified from National Wetlands Inventory maps, and classification trees were built for seven years spanning a range of annual precipitation. At a coarse level, palustrine wetland was separated from upland. At a finer level, five palustrine wetland types were discriminated: aquatic bed (PAB), emergent (PEM), forested (PFO), scrub-shrub (PSS), and unconsolidated shore (PUS). TM-derived variables alone were relatively accurate at separating wetland from upland, but model error rates dropped incrementally as image texture, DEM-derived terrain variables, and other ancillary GIS layers were added. For classification trees making use of all available predictors, average overall test error rates were 7.8% for palustrine wetland/upland models and 17.0% for palustrine wetland type models, with consistent accuracies across years. However, models were prone to wetland over-prediction. While the predominant PEM class was classified with omission and commission error rates less than 14%, we had difficulty identifying the PAB and PSS classes. Ancillary vegetation information greatly improved PSS classification and moderately improved PFO discrimination. Association with geothermal areas distinguished PUS wetlands. Wetland over-prediction was exacerbated by class imbalance in likely combination with spatial and spectral limitations of the TM sensor. Wetland probability surfaces may be more informative than hard classification, and appear to respond to climate-driven wetland variability. The developed method is portable, relatively easy to implement, and should be applicable in other settings and over larger extents.