高氯酸化三邻菲啰啉合铜(Ⅱ)的合成及晶体结构

合成了过渡金属元素Cu与1,10-邻菲啉的配合物并进行了元素分析、红外光谱等表征,测定了配合物的晶体结构。配合物组成为[Cu(phen)3](ClO4)2,属于单斜晶系,P2(1)/n空间群。配合物中金属离子Cu2+处于N6的配位环境,配位构型为六配位的拉长八面体。     

Active sites in methanol oxidation on Cu(110) determined by STM and molecular beam measurements

STM has been combined with molecular beam rate measurements to gain an understanding of the oxidative dehydrogenation of methanol to produce formaldehyde, both at the macroscopic and microscopic level. From this a model of the reaction is developed where the methanol initial reacts at very few active oxygen sites located at the short sides of oxygen islands on the Cu(110) surface. Such sites are very much rarer on a surface which is saturated with 0.5 monolayers of oxygen and the reaction rate is initially very low, but shows autocatalytic behaviour, rising in time as vacancies are created in the oxygen layer.     

Homogeneous versus heterogeneous catalytic reactions to eliminate organics from waste water using H2O2

Homogeneous (Cu²⁺ ions) and heterogeneous (Cu²⁺-pillared clay) Fenton-like catalysts have been compared in the conversion of p-coumaric acid. The performances of the two classes of catalysts are similar for an analogous amount of copper, but there are some relevant differences in terms of (i) the presence of an induction time, (ii) the turnover frequency, (iii) the efficiency in the use of H₂O₂, (iv) the initial attack of p-coumaric acid (hydroxylation on the aromatic ring or oxidative attack on the double bond of the lateral chain), and (v) the effect of dissolved oxygen on the removal of total organic carbon (TOC). These differences were interpreted in terms of reaction network of generation of radical oxygen species and of organics conversion. The possible formation of a surface peroxo adduct coordinated to a copper binulcear site was also evidenced for the solid heterogeneous catalyst.     

Soy protein combined with copper and boron compounds for providing effective wood preservation

Chromated copper arsenate (CCA), an arsenicbased wood preservative, is toxic to human health and the environment. Although CCA is stable in seasoned wood, there are potential dangers during CCA manufacture, lumber treatment, and waste disposal. This research was conducted to study the effectiveness of soy products to replace toxic chromium and arsenic compounds in wood preservative formulations. Three soy product (Arpro 2100, HM 90, and Supro 760) were used as fixative agents in preservative solutions containing anhydrous CuSO₄ and Na₂B₄O₇·10H₂O. The decay resistance of treated wood blocks was measured by a soil-block culture method. Despite the large molecular sizes of copper-protein and copper-boron-protein complexes, southern pine sapwood was treatable with these preservative formulations. Wood samples treated with >6 kg°m⁻³ CuSO₄ and 7.5 kg·m⁻³ soy product, and subsequently leached for 3 d and exposed to the decay fungus Gloeophyllum trabeum (Fr.) Mur., sustained only 0.5% weight loss over 12 wk. Wood samples needed 40 kg·m⁻³ CuSO₄ and 50 kg·m⁻³ soy protein to resist the copper-tolerant decay fungus Postia placenta (Fr.) M. Lars. & Lomb. These results suggest that soy-based wood preservatives can prevent wood products from fungal attack and can replace CCA.     

壳聚糖固定化脲酶生物传感器选择性测定铜离子

基于重金属对脲酶的抑制作用,研制了用于测定铜离子的生物传感器。该生物传感器的制备以壳聚糖为载体,将脲酶固定于pH电极表面。由于壳聚糖对Cu2+的富集,该生物传感器展现出高灵敏度。在样品溶液中加入5 mmol/L NaI,可以消除Hg2+和Ag+的干扰,从而实现Cu2+的选择性检测。在0.005～0.5μg/mL的浓度范围内,脲酶活性的抑制率与Cu2+浓度的对数呈良好的线性响应关系,其检出限为0.002μg/mL。将使用后的生物传感器浸泡于0.5 mmol/L的EDTA溶液再生5 min,被Cu2+抑制的脲酶的活性可以得到恢复。     

铜工业萃取剂及其应用

本文详述了国内外用于湿法冶金的铜萃取剂的研制进展，介绍了萃取剂的性能及其在铜的浸出－溶剂萃取－电积法提取工艺中的应用情况；指出浸出－溶剂萃取－电积（Ｌ－ＳＸ－ＥＷ）技术在我国铜工业领域中的前景十分广阔。     

掺铜TiO^2光催化剂光催化氧化还原性能的研究

利用浸渍法制备了掺铜二氧化钛光催化剂，分别以乙酸降解和二氧化碳还原反应为探针，研究了催化剂的光催化氧化光催化还原性能．结果表明，铜掺杂能显著提高催化剂的光催化性能；结合光电子能谱、X光衍射分析等物理表征结果，对铜掺杂改性机制进行了讨论．     

Synergistic Catalysis of Carbon Dioxide Hydrogenation into Methanol by Yttria-Doped Ceria/γ-Alumina-Supported Copper Oxide Catalysts: Effect of Support and Dopant

Methanol synthesis from carbon dioxide hydrogenation was studied over ceria/-alumina- and yttria-doped ceria (YDC)/-alumina-supported copper oxide catalysts to seek insight into the catalysis at metal–support interfaces. It was found that, in comparison with Cu/-Al₂O₃, the Cu/CeO₂/-Al₂O₃ and Cu/YDC/-Al₂O₃ catalysts exhibited substantial enhancement in activity and selectivity toward methanol formation. The extent of enhancement was augmented by increased ceria loading on -alumina and with increased yttria doping into ceria. The enhancement is inferred to result from the synergistic effect between copper oxide and surface oxygen vacancies of ceria.     

铜及其合金电解仿金着色工艺

详细介绍了一种铜及铜合金阴极还原着仿金色工艺及其配方。探讨了该工艺的着色原理、电流密度的影响及所得着色膜层的性能。结果表明，该工艺所得的膜层呈金黄色，结晶致密，耐蚀性好。     

非金属电镀用导电漆的研制

介绍了导电漆、作为导电填料的片状镀银铜粉的制备工艺流程。分别研究了漆膜表面单位电阻与镀银铜粉的含量及其粒径以及钛酸酯偶联剂的含量之间的关系。结果表明,当镀银铜粉的粒径为400目、质量分数在57%~65%之间,钛酸酯偶联剂的质量分数为10%时,所得涂膜的导电性能最佳。加入含C-18的油酸可以使导电漆长期贮存而电阻值不变。经检测,所得涂膜具有良好的性能:附着力1级,硬度1 H,柔韧性1 mm,冲击强度50 kg/cm2,膜厚10~15μm,漆膜表面每厘米电阻0.15Ω,每分米电阻0.47Ω。指出了导电漆应用过程中的注意事项。