基于高速摄像的ESPI全场动态特性测量

采用高速摄像与ESPI技术相结合,将运动中的被测物位移随时间变化的状态以序列图像的形式实时记录,并运用图像处理技术,成功地实现了ESPI动态测量。测量了悬臂梁的自由振动过程,获得了悬臂梁的振动周期、振动频率和阻尼系数等动态特性,实验结果与理论计算值相吻合。     

钢丝绳抽油杆抽油超冲程分析

通过对钢丝绳抽油杆和常规钢杆振动模型固有频率的分析，从理论上分析了钢丝绳抽油杆和常规钢杆振动形成谐振(超冲程)的奈件；同时讨论了振动阻尼系数对共振的影响关系，从理论上得出了钢丝绳抽油杆在抽油时更易形成超冲程，进而从理论上解释了钢丝绳抽油杆在抽油过程中的泵效较高的事实，进一步解释了当前人们对钢丝绳应用和研究中的一些疑点和难点，为钢丝绳抽油系统的设计和应用提供了重要的理论指导。     

Application of boundary element method to 3-D problems of coupled thermoelasticity

This paper deals with a new boundary element method for analysis of the quasistatic problems in coupled thermoelasticity. Through some mathematical manipulation of the Navier equation in elasticity, the heat conduction equation is transformed into a simpler form, similar to the uncoupled-type equation with the modified thermal conductivity which shows the coupling effects. This procedure enables us to treat the coupled thermoelastic problems as an uncoupled one, A few examples are computed by the proposed BEM, and the results obtained are compared with the analytical ones available in the literature, whereby the accuracy and versatility of the proposed method are demonstrated.     

Critical building separation distance in reducing pounding risk under earthquake excitation

A separation distance between adjacent buildings is provided to reduce the risk of pounding of adjacent buildings under seismic excitations. It should be recognized that the evaluation of the critical separation distance is a one-sided barrier crossing problem while the problem of structural design under seismic excitations is a two-sided crossing problem. A procedure for assessing the required separation distance with or without considering possible uncertainty in structural properties was presented based on the reliability methods and random vibration theory. The procedure was used to carry out parametric analyses. It is shown that use of the complete quadratic combination (CQC) rule with the modal responses employed for designing structures may over- or underestimate the critical separation distance, depending on the damping ratios and the closeness of the natural vibration periods of adjacent buildings. This is due to not only one-sided versus two-sided crossing problem but also the approximation in the CQC rule. Further, the effect of the uncertainty in structural properties on the estimated separation is investigated. The results indicate that this uncertainty tends to increase the required critical separation distance.     

半导体元件清洗技术浅谈

随着社会的进步和科学技术的迅猛发展,对洗净技术的要求也越来越高。清洗方式多种多样,但最主要的是突出在喷射清洗和超声波清洗两大方面,应用于全国各行各业,并且也得到了明显进步。     

2#板坯连铸机振动台故障分析及改造

论述了银山型钢有限公司炼钢厂2#板坯连铸机自投产以来其振动台存在的问题，根据实际情况分析论证并进行改造实施，实施后效果明显。     

海洋平台振动控制研究综述

对海洋平台结构振动的控制研究进行了综述。主要介绍了TMD、TLD以及粘弹性阻尼器，并相应地介绍了被动控制、半主动控制和主动控制技术。平台结构的自身减振设计也进行了介绍。最后对海洋平台结构振动控制问题进行了探讨，提出了一些看法。     

樊口大闸加固工程中的爆破振动分析

在考闸墩上爆破开挖出新的闸门槽，在新浇混凝土附近进行底板爆破开挖，爆破振动对闸墩和新浇混凝土的影响值得重视；介绍了在樊口大闸加固工程中的爆破振动观测成果，并对爆破振动特性进行了分析。     

初轧机主传动系统扭转自激振动的稳定性

用变量摄动法对初轧机主传动系统扭转自激振动的稳定性进行了初步研究，讨论了稳定性条件，为初轧机打滑状态的诊断、监测提供了参考依据。     

流体在环形狭缝中流动时园柱体的微振动

本文讨论了在两个园柱体的环形狭缝中不可压缩流体的流动．在一定的假设下，运用流体力学方程和流体对柱体的作用方程，导出了附加质量和转动惯量、振动频率和衰减系数．并对文（１）中的某些结果进行了必要的修正．