浆砌石衬砌在渠道防渗中的应用及对策

总结了浆砌石应用的历史,介绍了浆砌石的结构特性和施工工艺,从造价方面、防渗效果及施工三方面分析了浆砌石衬砌主要存在的问题,并提出了相应的解决对策,指出浆砌石衬砌在渠道防渗应用中应控制施工质量,从而更好地提高防渗效果。     

混凝土外加剂在防渗工程中的应用

根据江东灌区的工程实际，总结了在渠道防渗工程中混凝土外加剂应用情况，提出了应用中的注意事项。     

钢筋混凝土非正常裂缝的产生原因及应对措施

根据钢筋混凝土结构中非正常裂缝的种类，分析了各种裂缝的产生原因，并有针对性地提出了应对措施，以保证建筑物和构件安全和稳定地工作。     

Creep Crack Growth in Polypropylene Film with Various Crack Lengths at Diverse Stresses and Temperatures

Creep crack growth rates were measured using centrally cracked tension specimens of thin polypropylene film with different crack lengths at various stresses and temperatures. The creep crack growth rates were correlated with the stress intensity factor. There was the region of the minimum constant crack growth rate which occupied more than 70% of the total creep failure life. This constant creep crack growth rate characteristics were analyzed on the basis of the stress-dependent Arrhenius type thermally activated process.     

铸造镍基K3合金的激光熔覆开裂及工艺研究

研究了铸造镍基Ｋ３合金的激光熔覆过程，分析了原始组织及激光熔覆工艺参数对熔覆裂纹形成的及作用；探讨了使用激光熔覆技术对损伤的Ｋ３合金叶片进行修复的可能性。研究结果表明，Ｋ３合金中沿界分布的低熔点共晶及碳化物是引起激光熔覆开裂的主要因素，采用较高的功率密度和较快的扫描速度进行激光熔覆，可减少热影响区范围，明显地抑制熔覆裂纹的产生。     

超高强度钢CF裂纹扩展的超载效应 Ⅰ．定量模型及预测

将Ｗｉｌｌｅｎｂｏｒｇ的超载残余应力场模型与裂尖形变动力学、裂尖表面析氢反应电化学动力学以及裂尖材料内部氢的扩散动力学和热力学相结合，建立了氢脆腐蚀疲劳裂纹扩展（ＣＦＣＧ）超载效应的定量描述模型，给出了超载对裂尖表面析氢电化学反应及裂尖氢扩展影响的一系列判据和表达式．用上述模型进行的预测表明，对于超高强度钢，当两次超载周次之间裂纹扩展长度ａｄ远小于超载塑性区尺寸ｒｐＯＬ与恒载塑性区尺寸ｒｐＣＬＡ之差，即ａｄ＜＜ｒｐＯＬ－ｒｐＣＬＡ时，ＣＦＣＧ会发生比空气疲劳还强烈的超载迟滞效应．而当ａｄ＞ｒｐＯＬ－ｒｐＣＬＡ时，可能会发生超载加速效应．这种预测在后文中由试验的宏观规律与断口特征得到充分验证．     

格栅式水泥搅拌桩支护在西涌泵站的应用

简介水泥搅拌桩的支护机理,以西涌泵站为例介绍采用格栅式水泥搅拌桩作支护结构的设计及计算方法,指出该技术能较好地解决软湿粘性土地区枢纽深基础开挖问题.     

考虑渗流力的基坑涌砂分析

本文根据基坑防渗帷幕周围的地下水渗流特征，分析了渗流力对基坑流砂的影响，提出了按涌砂安全系数进行防渗帷幕埋入深度计算的方法。     

Low-cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu, and Sn-Ag-Cu-Bi lead-free solders

Low-cycle fatigue (LCF) tests on as-cast Sn-3.5Ag, Sn-3Ag-0.5Cu, Sn-3Ag-0.5Cu-1Bi, and Sn-3Ag-0.5Cu-3Bi solders was carried out using a noncontact strain-controlled system at 20°C with a constant frequency of 0.1 Hz. The addition of Cu does not significantly affect the fatigue life of eutectic Sn-Ag solder. However, the fatigue life was significantly reduced with the addition of Bi. The LCF behavior of all solders followed the Coffin-Manson relationship. The fatigue life of the present solders is dominated by the fracture ductility and can be described by the ductility-modified Coffin-Manson’s relationship. Steps at the boundaries of dendrite phases were the initiation sites for microcracks for Sn-3.5Ag, Sn-3Ag-0.5Cu, and Sn-3Ag-0.5Cu-1Bi solders, while for Sn-3Ag-0.5Cu-3Bi solder, cracks initiated along both the dendrite boundaries and subgrain boundaries in the dendrite phases. The linking of these cracks and the propagation of cracks inside the specimen occurred both transgranularly through eutectic phases and intergranularly along dendrite boundaries or subgrain boundaries.     

上马水库地裂缝成因及工程处理措施探讨

文中着重阐述了上马水库库坝区的地裂缝产生的原因及发育规律,分析了地裂缝对水库的直接危害,为水库除险加固设计提供了指导,并提出了切实可行的工程处理措施建议。