非饱和土的抗剪强度理论研究

从孔隙水的存在状态出发 ,围绕Bishop抗剪强度公式中存在的几个疑点展开讨论 .认为非饱和土中支配强度和变形的应力之所以不同 ,是因为非饱和土中存在一种性质与有效应力不同的应力———内部应力 ,它不传递 ,仅影响土的塑性变形 .同时还对Bishop ,Fredlund和卢肇钧提出的抗剪强度公式中的参数测试方法进行分析 ,指出 :各种抗剪强度理论在概念上都是相同的 ,其区别仅在于确定由吸力产生的那部分有效应力时采用的参数和测试方法不同     

矿业可持续发展理论及应用

在简要回顾我国矿业发展现状及其在环境破坏污染和资源浪费损失的基础上，提出矿业可持纽发展的概念与内涵，论述矿业可持续发展的动态２特征，并就如何实施矿业可持结发展战略进行了思考。     

用超声波技术测量螺栓轴向紧固应力

超声波速度会因材料中加载应力而产生微小的变化，这一现象特别适用于测量螺栓的轴向应力。根据螺栓的轴向应力与超声波传播时间变化率的关系，作者研究了一种可直接测量螺栓轴同应力的仪器。实验结果显示，本项技术十分适合现场的实际应用。     

COMPRESSION FATIGUE CRACK GROWTH BEHAVIOUR OF AN ALUMINIUM ALLOY: EFFECT OF OVERLOADING

Abstract— The behaviour of fatigue cracks in an Al-alloy under cyclic compression, either with or without overloads, was studied. For constant-amplitude compressive cycling, a non-catastrophic (saturation) character of the fatigue crack behaviour was confirmed, with the final depth of a crack depending on the applied load level. Single (tensile or compressive) intermittent overloads were shown to re-activate a previously arrested crack while reversed (tensile—compressive or compressive—tensile) ones were also shown to maintain continual fatigue crack extension under otherwise fully compressive cycling.     

氧化铝陶瓷缺口件循环疲劳及断裂机理

用实验方法研究了Ａｌ＿２Ｏ＿３陶瓷缺口试件在循环载荷作用下的疲劳寿命。结果表明，缺口导致的应力集中效应显著降低了循环疲劳寿命；若用缺口根部最大应力为应力水平，则不同缺口半径陶瓷试件具有相同疲劳断裂规律，说明陶瓷材料的疲劳集中系数和理论应力集中系数相同。本文还分析讨论了陶瓷材料的循环疲劳寿命表达式和循环疲劳断裂机理。     

冲击能传感器的研究与分析

本文分析并推导了应力波在弹性体中传播时,质点的运动速度、压力、位移及应力载波的聚流的形成与表达式.利用得到的公式描述了冲击能传感器的工作机理.给出了某风动工具的测试结果.     

用强度系列成象法获取或显示高动态范围图象

提出一种适合于高动态范围图象的获取和显示的强度系列成象法。改变输入图象的强度，微机控制的图象采集系统进行记录得到一组磁盘文件，形成强度图象系列。基于记录的系列图象，可以进行信息提取、变换和显示等操作。基于获得的图象系列，提出一种剪贴操作进行快速的非线性图象变换。给出对光学功率谱处理的一个实例，它相当于进行锯齿形的非线性变换。     

Control strategies for reactive batch distillation

A batch reactor may be combined directly with a distillation column by distilling off the light component product in order to increase the reactor temperature or to improve the product yield of an equilibrium reaction. The same amount of the light product should be removed as the amount being formed by the reaction at any time. A linearized model has been developed which describes the process behaviour satisfactorily for control analysis purposes. The controllability of a combined batch reactor/batch distillation column is found to depend strongly on the operating conditions and on the time during the run. In general, controlling only the reactor temperature (one-point bottom control) is difficult since the set-point has to be specified below a maximum value in order to avoid break-through of an intermediate component in the ditillate. This maximum value may be difficult to know a priori. For the example considered in this study, control of both reactor temperature and distillate composition (two-point control) is also found to be difficult due to large interactions in the column. As with one-point bottom control, the reactor temperature has to be specified below a maximum value. However, energy can be saved since the heat duty can be decreased with time. Controlling the temperature on a tray in the column (one-point column control) is found to give good performance for the given process with no loss of reactant and a high reactor temperature, although no direct control of the reactor temperature is obtained.     

板式塔中无伸缩型受液槽的改进

对板式塔中的受液槽进行了改进，将无伸缩型改性伸缩型，避免了漏液，提高了常压塔的分离效果。     

湿硫化氢环境下的球罐腐蚀状况分析

在湿硫化氢环境下 ,尤其储存介质中的硫化氢含量超标时 ,很容易对储存容器壳体 (含焊缝和母材 )造成硫化氢应力腐蚀或氢鼓包。作者较仔细分析了 1 0 0 0m3 丙烯球罐产生硫化氢应力腐蚀开裂和40 0m3 LPG球罐产生氢鼓包的原因。提出了此类设备在设计选材、设备制造、施工安装和使用维护等环节应注意的问题。