台北凹陷小草湖次凹油气成藏特点及有利区带

吐哈盆地小草湖次凹发育多套烃源岩，油源条件好，油气资源丰富，油气勘探潜力巨大，中侏罗统发育三套储盖组合，凹陷内油气藏类型主要为侏罗系三间房组，七克台组的构造－岩性复合型和侏罗系西山窑组的深盆气藏，燕山运动末期是小草湖次凹一次重要的成藏期，古构造，古构造背景和构造－岩性复合型圈闭发育是小草湖次凹成藏主控因素，根据小草湖次凹成藏主控因素评价和优选有利区带，勘探工作取得了良好效果。     

固井声幅-变密度测井的影响因素分析

利用声幅－变密度测井进行固井质量的评价受到诸多因素的影响，各种影响因素对声幅－变密度测井资料的影响作用有较大的差异，根据大量测井资料分析和实验研究，对仪器偏心、测井时间，套管尺寸与重量，地层岩性，气侵、水泥环微间隔等因素的影响作用进行了较为深入的分析，为各种影响因素的识别与校正提出了相应的方法和依据。     

基于相关性的人机系统可靠性模型

本文在剖析人机系统中操作者行为特征的基础上,考虑到操作者行为的自适应性、自学习能力及其行为形成主因子,着重结合操作者行为的相关性-感知作用于判断决策后影响到动作,建立了人机系统中操作者行为模式,并推导出计算操作者可靠度的公式,求出了相应参数.最后进行了实例量度,同时定量辨识了行为相关性对人可靠性的制约程度,以期从人机系统可靠性角度为人机系统的优化设计提供新的依据.     

无功补偿对远距离供电节能降耗的分析

本文从理论上分析了在不同功率因数下不同供电距离的能耗对比及近年来进行无功补偿的情况,从而说明了无功补偿对远距离供电节能降耗的重要意义。     

濮城油田濮67块低渗凝析难动用气藏挖潜技术研究

濮67块具有埋藏深、物性条件差、储量难动用程度低等特点，目前气藏采出程度很低，开发效果差。通过对濮67块天然气储量再认识，落实了该块储量；通过对濮67块各砂组剩余天然气分布规律的研究，明确了剩余气的下步挖潜方向；并开展了配套的剩余天然气挖潜技术研究，通过在生产中应用，取得了较好的增产效果，提高了气藏的采收率。     

合成氨扩能改造中锅炉存在的问题及采取的措施

针对天脊集团年产30万t合成氨扩能改造,给2台225t/h高压锅炉带来的除氧器热量过剩、锅炉给水温度升高、主蒸汽温度降低等一系列问题,分析了产生问题的原因,从节约能源、提高锅炉效率考虑,提出了相应的解决问题的办法:利用热量分流、改造省煤器管、增加二级过热器受热面积。经过3年多的生产实践证明,取得了良好的效果。     

基于双因子认证技术的网络身份识别

本文提出了一种基于动态双因子认证技术的网络身份识别方法,用户每次登录的口令是利用系统时间和用户ID通过MD5加密算法计算得到,其通过MD5加密后生成的登录口令是随机的,这将进一步提高开放网络环境下身份识别的可靠性和安全性。同时,本文还提出网络身份识别技术可以应用到各类网站的服务器上,用来完成对用户身份的识别,以提高网络系统的安全性。     

压密注浆及其在地基加固中的应用

在简单介绍了压密注浆工法的加固机理、影响被加固土体强度的因素的基础上，结合工程实例介绍了压缩注浆工法的工程应用情况。     

A new iterative order reduction (IOR) method for eigensolutions of large structures

Order reduction is a computationally efficient method to estimate some lowest eigenvalues and the corresponding eigenvectors of large structural systems by reducing the order of the original model to a smaller one. But its accuracy is limited to a small range of frequencies that depends on the selection of the retained degrees of freedom. This paper proposes a new iterative order reduction (IOR) technique to obtain accurately the eigensolutions of large structural systems. The technique retains all the inertia terms associated with the removed degrees of freedom. This hence leads to the reduced mass matrix being in an iterated form and the reduced stiffness matrix constant. From these mass and stiffness matrices, the eigensolutions of the reduced system can be obtained iteratively. On convergence the reduced system reproduces the eigensolutions of the original structure. A proof of the convergence property is also presented. Applications of the method to a practical GARTEUR structure as well as a plate have demonstrated that the proposed method is comparable to the commonly used Subspace Iteration method in terms of numerical accuracy. Moreover, it has been found that the proposed method is computationally more efficient than the Subspace Iteration method. Copyright © 2003 John Wiley & Sons, Ltd.     

Terminal velocity of non-spherical particles falling through a Carreau model liquid

A procedure has been proposed for the estimation of the terminal falling velocity of non-spherical particles moving in a Carreau model fluid in the transition flow region. The procedure is based on a modification of the relationship formerly developed for the fall of spherical particles including the particle dynamic shape factor. The suitability of the proposed procedure has been confirmed by good agreement between experimental and calculated terminal falling velocity data. In the experiments, the terminal falling velocity of short cylinders and rectangular prisms in polymer solutions of different measure of shear thinning and elasticity has been measured.