Error Analysis for High-precision 7m Laser Measuring Machine

This paper introduces a high precision 7m laser measuring instrument developedby the anthors and its operating principle,and systematically analyses the errors havinginfluence on the performance of the measuring instrument.Error analysis and actualverification indicate that all the characteristics reached or exceeded the original designspecifications.     

添加晶种对硅酸盐水泥生料易烧性影响的研究

采用实验室制备不同种类单矿物，纯熟料及白水泥熟料为晶种，利用ＤＴＡ，ＸＲＤ及测定游离石灰等方法，研究了其对硅酸盐水泥生料易烧性的影响。结果表明；铁相的作用在四种单矿物中最为明显，其它三种主要矿物也均有不同程度地促进煅烧过程的熟料矿物形成的作用。     

剪切场下聚合物结晶形态学研究进展

聚合物熔体被引入剪切场后，会发生与静态下不同的结晶现象。微观上可以得到伸直链晶体、片晶及串晶；宏观上除了静态下典型的球晶外，还能观察到球晶的变形和柱晶等。另外，剪切还可以使晶体发生晶型转变。本文对聚合物熔体在剪切场下结晶形态学的研究进展进行了介绍。     

电磁搅拌技术的发展及其在武钢的应用

电磁搅拌技术能够有效地改善铸坯的质量，成为金属凝固过程控制的重要手段之一。论述了电磁搅拌技术的发展、作用及其在武钢的应用。随着技术的进步和发展，电磁搅拌技术不断更新和发展，必将迎来一个辉煌的应用前案。     

氟化钡晶体质子辐照损伤分布的计算

根据经典辐射理论，描述质子辐照BaF2晶体的能量损失，讨论受照晶体的辐照损伤分布，用Monte Carlo方法模拟碰撞过程，具体用TRIM程序分别计算出能量为1．5Mev和2．0Mev质子辐照BaF2晶体所产生的辐照损伤，对计算结果进行讨论，将这两种能量情况下的BaF2晶体辐照损伤分布进行比较。得到的结论与实验结果基本相符。     

Pulsed Laser Precision Length Measurements

The paper discusses mode locking use in pulsed lasers for precision measurement of large lengths.     

Hydrothermal Synthesis and Crystal Structure of a New Dimeric Lanthanum(Ⅲ) Complex

A new dimeric lanthanum(Ⅲ) complex [La2(phen)2(C7H3N2O6)6](phen=1,10-phenanthroline) was synthesized by the hydrothermal method and determined by single crystal X-ray diffraction analysis. The La(Ⅲ) ion is coordinated to seven oxygen atoms from five carboxylate groups and two nitrogen atoms from a phen ligand,forming a monocapped square antiprismatic geometry. Six carboxylate groups coordinate to two La(Ⅲ) ions in three modes which are chelating bidentate,bridging bidentate and bridging tridentate. The crystal is triclinic with space group P-1,a=1.2030(4) nm,b=1.2962(5) nm,c=1.3330(5) nm,α=104.410(5)°,β=114.048(4)°,γ＝100.054(4)°,V=1.7467(10) nm3,Mr=952.46,Z=2,Dc=1.811 g·cm-3,F(000)=944,S=1.017,μ=1.320 mm-1,with R1=0.0298 and wR2=0.0625.     

Investigation of Structure and Hydriding Properties of La0.6 Nd0.4 Ni4.8 Mn0.2 Cux Alloys

The structure and hydriding performance of La0.6Nd0.4Ni4.8Mn0.2Cux (x = 0 ～ 0.4) alloys were investigated in order to develop suitable materials for metal hydride air conditioner. The effect of Cu addition on the crystal structure,equilibrium pressure, hydrogen capacity and hysteresis as well as hydrogen absorption/desorption kinetics were systematically studied by using the measurement of P-C isotherms, X-ray diffraction and scanning electron microscopy. As the amount of Cu increases, the plateau pressure increases and hydrogen absorption/desorption kinetics is improved, but the effective hydrogen storage capacity decreases. It is shown that variations in the basal plane parameter a can be used as an indication for the plateau pressure changes. With the increase of parameter a, the plateau pressure decreases. For La0.6 Nd0.4Ni4.8Mn0.2Cux(x = 0 ～ 0.4) alloys there is a relationship between the effective hydrogen storage capacities and the ratios of their unit cell parameters c and a. The effective hydrogen storage capacity decreases with increase of a/c.     

X-band deflecting cavity design for ultra-short bunch length measurement of SXFEL at SINAP

For developing the X-ray Free Electron Lasers test facility(SXFEL) at Shanghai Institute of Applied Physics,Chinese Academy of Sciences(SINAP), ultra-short bunch is the crucial requirement for excellent lasing performance. It is a big challenge for deflecting cavity to measure the length of ultra-short bunch, and higher deflecting gradient is required for higher measurement resolution. X-band travelling wave deflecting structure has features of higher deflecting voltage and compact structure, which has good performance at ultra-short bunch length measurement. In this paper, a new X-band deflecting structure is designed to operate in HEM11-2π/3 mode.For suppressing the polarization of deflecting plane of the HEM11 mode, two symmetrical caves are added on the cavity wall to separate two polarized modes.     

有一个紧固件的半无限板孔周应力有限元分析

用有限元法计算了有一个紧固件孔的半无限平板在紧固件力作用下的孔周应力．在紧固件与孔之间的接触区域的结点间加无长刚杆元．用反复计算的方法确定接触范围；计算出孔周应力等，并与文献［１］的实验结果进行了比较．