The effect of ionic interaction on the miscibility and crystallization behaviors of poly(ethylene glycol)/poly(L‐lactic acid) blends

The effect of end groups (2NH₂) of poly(ethylene glycol) (PEG) on the miscibility and crystallization behaviors of binary crystalline blends of PEG/poly(L ‐lactic acid) (PLLA) were investigated. The results of conductivity meter and dielectric analyzer (DEA) implied the existence of ions, which could be explained by the amine groups of PEG gaining the protons from the carboxylic acid groups of PLLA. The miscibility of PEG(2NH₂)/PLLA blends was the best because of the ionic interaction as compared with PEG(2OH, 1OH‐1CH₃, and 2CH₃)/PLLA blends. Since the ionic interaction formed only at the chain ends of PEG(2NH₂) and PLLA, unlike hydrogen bonds forming at various sites along the chains in the other PEG/PLLA blend systems, the folding of PLLA blended with PEG(2NH₂) was affected in a different manner. Thus the fold surface free energy played an important role on the crystallization rate of PLLA for the PEG(2NH₂)/PLLA blend system. PLLA had the least fold surface free energy and the fast crystallization rate in the PEG(2NH₂)/PLLA blend system, among all the PEG/PLLA systems studied. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

对硝基氯苯结晶工艺的改进

分析了对硝基氯苯结晶的规律，总结出了测准进料凝固点及进料凝固点配水降温的操作经验，取得了较好效果。     

用参数泵分步结晶制取精萘的新工艺及放大

采用参数泵分步结晶工艺，开发了直立弹状流气泡管结晶器，由工业萘提纯制取精萘。实验室研究和放大试验的研究表明，产品纯度大于９９％，收率大于９２．５％。弹状气泡强化了传热和传质过程，流体的均布是放大过程的关键。     

New strategies for separations through reactions

Separations through reactions can provide reliable and economically viable alternatives to established methods of separation, particularly for close boiling substances. New strategies in ‘Dissociation Extraction’ and ‘Dissociation Extractive Crystallization’ for separation of close boiling acidic/basic mixtures have been highlighted. Separations with aqueous solutions of hydrotrope and aqueous micellar solutions have been brought out. Separations by membranes with facilitated transport is potentially attractive. This paper is dedicated to Dr L K Doraiswamy on his sixtieth birthday.     

K_2O－B_2O_3－SiO_2玻璃成分对析晶性能的影响

本文利用ＤＴＡ、ＸＲＤ、ＴＥＭ、ＳＥＭ等技术研究了三种Ｋ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２玻璃的析晶性能。结果表明，Ｋ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２玻璃的析晶由分相引起，分相和析晶能力受成分影响较大。随Ｂ２Ｏ３和Ｋ２Ｏ含量增多及Ｋ２Ｏ／Ｂ２Ｏ３比值的降低，析晶加强。析晶中主晶相类别尚未查清，次晶相确定为α－方石英。     

诱导结晶条件下硅酸盐水泥熟料形成动力学的研究

根据诱导结晶的原理，我们提出了用已烧好的同类优质熟料作为晶种，诱导水泥烧成过程中的矿物形成。用掺与不掺对比的方法，利用现代物理、化学手段进行了研究。结果表明：明显提高了生料的易烧性；使ｆ－ＣａＯ明显下降；水泥熟料形成的活化能降低；刚分解的ＣａＯ在晶种表面富集；加快了各个阶段的固相反应；加快了熟料矿物形民；熟料矿物质量有所提高；并使ｆ－ＣａＯ的结构特征上发生了易于消解的变化。     

机械合金化Fe─B非晶合金及纳米合金的形成

在适当条件下机械合金化可以形成急冷法难以得到的单一Ｆｅ６０Ｂ４０非晶合金，而在其他成分内形成亚稳纳米合金。在众多的球磨条件中，球磨机的转速是控制合金化的重要因素，空气中的氧对小颗粒界面产生了强烈的污染作用，从而抑制了原子的相互扩散，难以形成单一的非晶产物。不同球磨条件下的产物含有的非晶相的晶化温度比单一非晶相合金的晶化温度稍高，并且与球磨条件以及成分的关系不大。     

高强度低密度大模量菲晶态Ai—Li合金

利用单辊快速凝固装置制备出高强度、低密度、大楼量的非晶态Ａｌ６１Ｌｉ２．５Ｙ２５Ｎｉ１１．５（ｗｔ－％）合金，其最大拉伸断裂强度、显微硬度和弹性模量分别为１０３９ＭＰａ、４８８ＤＰＮ和９８．７ＧＰａ．与同成分的晶态合金相比，具有较高的电极电位、较宽的电压钝化区，其腐蚀抗力为晶态合金的７倍．在恒加热速率的晶化过程中出现４个晶化峰，晶化激活能的计算表明，Ａｌ６１Ｌｉ２．５Ｙ２５Ｎｉ１１．５非晶合金的晶化过程为一级反应．     

纳米晶镁铝尖晶石透明微晶玻璃的晶化行为研究

利用DTA、XRD和TEM研究了制备工艺对微晶玻璃晶化行为的影响，并制备出具有纳米镁铝尖晶石为晶相的微晶玻璃。