齿轮精锻的数值模拟与实验研究

本文对空心直齿圆柱齿轮的精锻成形过程进行三维刚塑性有限元模拟和实验研究。通过有限元数值模拟和实验研究 ,得出了直齿圆柱齿轮精锻过程的金属流动规律和变形力学特征 ,揭示了直齿圆柱齿轮精锻过程的变形机理 ,数值模拟结果与实验结果吻合较好     

EPS模陶瓷型精密铸造失模工艺研究

针对EPS陶瓷壳型精铸失模时容易裂壳的现象,对EPS消失模精密铸造工艺进行了研究。利用自制的膨胀率检测设备对不同密度的EPS模试样在不同加热温度下的最大膨胀率进行了测试,研究了壳型膨胀与失模温度之间的关系;对陶瓷壳型中EPS模失模时的温度场分布进行测量,发现EPS模试样的密度大小对失模时温度场有着很重要的影响。在试验和分析的基础上,对EPS模失模机制进行了探讨,提出了高温失模机制。高温失模有利于降低失模时对壳型的膨胀作用力,为获得洁净而健全的陶瓷型壳提供了可靠保证。     

高速切削机床中的磁轴承

高效化是机械制造的永恒主题之一。本文简介了高速切削的理论依据及其优点，分析了磁悬浮轴承的原理、特点以及磁浮轴承在高速切削机床上的应用情况，从而说明了磁浮轴是高速切削机床最理想的轴承之一。     

滚切剪剪切力的实验研究

对直导向滚切剪的剪切力进行了实验研究，得到了计算最大剪切力的经验公式。     

304不锈钢精铸件点缺陷的形成与控制

针对典型304不锈钢精密铸件内出现的黑色点缺陷,对其表面形貌、成分进行了分析,并在此基础上总结了缺陷的形成机制,确定了相应的防止措施。研究结果表明,铸件内的点缺陷可以划分为两类:一类具有不规则截面,为脱蜡过程中剩余腊料的燃烧残留物;另一类为熔炼过程中,由于脱氧剂和除渣剂的去除不彻底而引入的夹杂。通过优化脱蜡和熔炼工艺,使得铸件内的点缺陷得到了很好的控制。     

Ti-23Al-17Nb合金激光切割工艺研究

对一种金属间化合物Ti-23Al-17Nb合金的激光切割性进行了初探。试验结果表明只要工艺参数适当，可获得较好质量的切口。切缝质量可以满足随后激光拼焊的要求。     

高速精密定位X-Y工件台动态精度分析

根据高速精密X-Y工件台的工艺参数的特点,对高速精密定位X-Y工件台的动态精度进行分析,包括阶跃输入时间响应、频率响应、系统的动刚度kD的分析.并从结构及材料方面提出了使高速精密定位X-Y工件台达到良好技术性能指标的方法.     

On the evaluation of the global heat transfer coefficient in cutting

The use of numerical simulations for investigating machining processes is remarkably increasing because of the simulation cost is lower than the experiments and the possibility to analyze local variables such as pressures, strains, and temperatures is allowable. Process simulation is very hard from a computational point of view, since it frequently requires remeshing phases and very small time steps. As a consequence, the simulated cutting time is usually of the order of few milliseconds and no steady cutting conditions are generally achieved, at least as far as thermal conditions are concerned. Therefore, nowadays numerical prediction of cutting temperatures cannot be considered fully reliable. In the paper this issue was taken into account: a mixed Lagrangian-Eulerian numerical approach was utilized and the global heat transfer (film) coefficient at the tool-chip interface was derived through an inverse approach. Finally, the dependence of the film coefficient on pressure and temperature on the rake face was investigated.     

A critical analysis on the friction modelling in orthogonal machining

Despite the development of high performance finite element-based codes, the simulation of machining still represents a very hard task due to the geometric complexity of the real chip-tool systems and the high cutting speed that requires very long simulation times. For these reasons, many aspects related to machining are not very clear and so easy to simulate. In this paper a rigorous investigation on the role played by the implemented friction model within a 2D simulation of orthogonal cutting was carried out, taking into account different models proposed by the researchers in the last years. The main simulation results were compared with experimental measurements in order to verify if it is possible to identify the best model. Once the comparison with mechanical variables was completed, a subsequent study on temperature predictions utilizing the above friction models was executed as well. The results of this integrated numerical and experimental work are carefully reported in the paper.     

金刚石颗粒在锯切石材过程中磨损形态的研究

本文分析和归纳了锯切花岗石过程中金刚石颗粒的五种磨损形态和三个磨损阶段，探讨了金铡石颗粒磨损形态对金刚石锯片锯切性能的影响。