掏槽法在黄麦岭磷矿掘双壁沟爆破中的应用

在黄麦岭磷矿露天开采的掘沟爆破中，根据掏槽法的机理，使用大孔径深孔掏槽，采用多排微差挤压爆破，一次形成开采所需的双壁沟，提高了掘沟效率，扩大了掏槽法的应用范围。     

Dis-Bond Detection and the Possibility of Interfacial Stiffness Measurement with Real-Time Impulsive Stimulated Thermal Scattering

We describe a new, real-time, noninvasive method for dis-bond (delamination) detection which is based on a technique known as impulsive stimulated thermal scattering (ISTS). We first explain the ISTS technique and compare data from polyimide films tightly bound to silicon substrates with data from unsupported polyimide films. The observed differences in the data from these two cases are readily understandable and offer an unmistakable signature for delaminations. We demonstrate ISTS dis-bond detection by locating and mapping out randomly-distributed and spatially-fine regions of delamination in a polyimide film-silicon substrate system. Finally, we present two simple physical models of the interfacial region which comprehensively describe acoustic data from the tightly-bound and the unsupported samples. With insight from simulations using these models, we suggest how ISTS might be used to determine interfacial adhesion quality and we show how ISTS sensitivity to interfacial effects can be adjusted.     

On Modulus and Fracture Toughness of Rigid Particulate Filled High Density Polyethylene

A Kaolin-filled, high-density polyethylene (HDPE) system was used to illustrate the influence of particulates on modulus and toughness of the bulk material. A variation of filler content, particulate size and coupling quality for two HDPE-matrix systems with different viscosity led to a strong dependency of elastic modulus and fracture toughness under various testing conditions, e.g. static loading, fatigue and impact.

A stiffness improvement with increasing filler content was achieved by all coupling qualities. The developed Kaolin reinforcement of HDPE with optimised coupling offers an improvement of the stiffness and toughness under all investigated loading conditions. The degree of improvement depends on the particulate size and matrix viscosity. The energy dissipation mechanisms were investigated by fractographic analysis.     

循环荷载作用下重塑饱和粉黏土的刚度弱化特性研究

以东海大桥海上风电场项目为课题背景,通过动三轴系统对重塑饱和粉质黏土开展一系列长期不排水循环加载三轴试验,分别考虑围压、动应力比和频率3种因素,特别是对高频(f5 Hz)下土体的动力弱化特性进行了研究。试验结果表明:累积塑性应变与累积孔压随着循环次数的增加而增大并且趋于稳定,呈现出应变软化和孔压软化现象。割线动变形刚度模量和割线动弹性刚度模量则随着循环次数的增加,先急剧降低然后趋于稳定,从而表现出刚度弱化现象。进一步研究了割线动弹性刚度模量与循环应变幅值的关系,割线动弹性刚度模量的衰减趋势受动应力比和频率的影响不大,与围压有关,围压越大,割线动弹性刚度模量衰减趋势越慢,衰减稳定幅值越低。     

基于概念设计阶段的解耦模式车门截面形状优化方法

为了提高车门静态刚度, 采用基于HDMR理论的多参数解耦优化方法与Morph技术结合, 对一款处于概念设计阶段车门的主截面形状进行优化。这种建模方法的特点在于通过少量的样本点识别形状变量之间的耦合关系, 进而将高维问题进行分解, 在保证精度的前提下提高计算效率。采用Kriging插值方法对Cut-HDMR的各项进行构造, 得到车门各刚度下的考察点位移和质量的近似模型, 进而利用非支配排序多目标遗传算法（NSGA-Ⅱ）对近似模型进行优化, 在车门静态刚度均达到设计要求的前提下合理进行减重, 使垂直刚度和扭转刚度得到了很大的提高。     

心内膜三维几何模型交互式网格切割算法研究

针对心内膜三维标测系统中心内膜模型网格切割模块,提出一种新的交互式网格切割算法。系统在载入心内膜三维几何模型后初始化切割平板模型,由用户交互移动切割平板和旋转切割平板的法线。借助矩阵变换,针对心内膜三维几何模型实现能反映用户切割意图和保持网格细节特征的网格切割,而且切割平板可以消除锯齿效应。实验对比结果证明,该算法对于心内膜三维几何模型可以实现令用户满意的实时无锯齿交互式网格切割。     

冲压式舵机动态特性测试系统的研制

为了在实验室条件下模拟冲压式舵机的舵面在空中所受的气动载荷,实现舵机系统动态性能指标的综合检测,设计了基于PXI总线的舵机动态测试系统,工作过程中对舵偏角信号、工作电流信号、扭矩信号进行实时采集、显示,并配合测试流程完成对舵机动态性能的测试。设计中重点考虑了定刚度加载系统的小扭矩加载精度、小转动惯量以及同轴度问题。实验结果表明,该测试系统测试精度高、使用维护方便,满足要求。     

新型陶瓷刀具材料的研究与开发

工业用钢材的质量提高使材料加工难度增加,耐高温的高硬度高强度陶瓷材料被用做切削刀具并逐渐推广应用。本文对陶瓷刀具的材质、种类、性能特点作了比较和评价,并重点介绍了新型的晶须增韧陶瓷刀具。最后,对陶瓷刀具的市场前景进行了预测,并指出了陶瓷刀具研制方面应该深入研究的课题。     

Tensile modulus modeling of carbon‐filled nylon 6,6 and polycarbonate‐based resins

Electrically and thermally conductive resins can be produced by adding conductive fillers to insulating polymers. Mechanical properties, such as tensile modulus, are also important. This research focused on performing compounding runs followed by injection molding and tensile testing of carbon‐filled nylon 6,6 and polycarbonate‐based resins. The three carbon fillers investigated included an electrically conductive carbon black, synthetic graphite particles, and a milled pitch–based carbon fiber. For each polymer, resins were produced and tested that contained varying amounts of these single‐carbon fillers. In addition, combinations of fillers were investigated by conducting a full 2³ factorial design and a complete replicate in each polymer. These tensile modulus experimental results were then compared to results predicted by several different models. For the composites containing only one filler type, the Nielsen model with the modified Ψ term provided the best prediction of the actual experimental values. For the composites containing more than one filler type, a new parameter, which includes the vibrated bulk density (VBD) of the fillers, was incorporated into the Nielsen model with the modified Ψ term. This model with the new VBD parameter provided the best estimate of experimental tensile modulus for composites containing multiple‐filler types. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1716–1728, 2003     

基于有限元方法的3-PPSR大长径比柔性并联机器人刚度模型分析

为实现较大工作空间的运动,设计了一种大长径比的3-PPSR结构的微操作柔性并联机器人.该机器人由压电马达驱动,采用大长径比柔性铰链连接,柔性铰链的变形范围在毫米级,适用于要求大变形的场合,同时具有结构简单、无奇异、无间隙、运动精度高等特点.由于系统的刚度直接影响系统的运动精度、承载负荷等性能,针对大长径比柔性铰链特点,运用有限元方法,建立了柔性铰链的数学模型,并采用整体刚度的方法,结合机构协调方程和力平衡方程,得到系统的柔性刚度模型.最后,采用ANSYS比较了所建理论刚度模型结果与有限元模型分析的结果.分析结果表明,理论刚度模型合理,符合机构的运动特征.