Occurrence and diversity of Listeria spp. in seafood processing plant environments

Listeria contamination in processing plant environments is a major issue for the seafood industry worldwide; faster and more reliable results are therefore desired for early detection and monitoring of environmental Listeria spp. This study aimed to gain a better understanding of the prevalence and diversity of Listeria spp., and to evaluate a rapid detection method, the 3M Molecular Detection Assay (MDA) Listeria, for its ability to detect Listeria spp. in environmental samples from seafood processing plants. Duplicate environmental sponge samples (n = 444) were collected from 152 different sites within three seafood processing plants, and analyzed for Listeria spp. by the MDA method (after 26 and 48 h of enrichment) and the U.S. Food and Drug Administration Bacteriological Analytical Manual method. Overall, detection of Listeria spp. by the two methods did not differ significantly (p > 0.05); 11 (4.9%) and 13 (5.9%) samples were positive for Listeria spp. by the MDA and FDA-BAM method, respectively. The sensitivity of the MDS was 87.0% (95% CI: 77.4–96.6%), specificity was 97.6% (95% CI: 95.5–99.7%), accuracy was 95.3%, and the positive predictive value was 89.4% (95% CI: 80.5–98.2%). Classification of 19 Listeria isolates by partial SigB sequencing analysis identified three allelic types. Twelve of these isolates were ATs 58 and 60 which were classified as Listeria monocytogenes lineage I and serotypes 1/2b, 3b, 4b, 4d, 4e, by multiplex-PCR serotyping. Six Listeria isolates were classified as Listeria innocua (AT31). Our data show that the 3M Molecular Detection Assay Listeria provides rapid and reliable results for detection and monitoring of Listeria spp., which are important for seafood processing plants. Effective Listeria monitoring programs will allow for improved development of Listeria control measures in order to minimize cross-contamination in finished products.     

Ballistic behavior of plain and reinforced concrete slabs under high velocity impact

This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete slabs. In this paper, we focus on the comparison of the performance of the plain and reinforced concrete slabs of unconfined compressive strength 41 MPa under ballistic impact. The concrete slab has dimensions of 675 mm × 675 mm × 200 mm, and is meshed with 8-node hexahedron solid elements in the impact and outer zones. The ogive-nosed projectile is considered as rigid element that has a mass of 0.386 kg and a length of 152 mm. The applied velocities vary between 540 and 731 m/s. 6 mm of steel reinforcement bars were used in the reinforced concrete slabs. The constitutive material modeling of the concrete and steel reinforcement bars was performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. The analysis was conducted using the commercial finite element package Abaqus/Explicit. Damage diameters and residual velocities obtained by the numerical model were compared with the experimental results and effect of steel reinforcement and projectile diameter were studies. The validation showed good agreement between the numerical and experimental results. The added steel reinforcements to the concrete samples were found efficient in terms of ballistic resistance comparing to the plain concrete sample.     

Preparation of molecularly imprinted fluorescence sensor based on carbon quantum dots via precipitation polymerization for fluorescence detection of tetracycline

A facile and effective method was proposed to prepare the molecularly imprinted fluorescence sensor with carbon quantum dots, which were modified vinyl groups by acrylic acid on the surface. The obtained fluorescence composite material was investigated by transmission electron microscope and Fourier transform infrared spectra. After the experimental conditions were optimized, a linear range of 1.0–60 μmol L⁻¹ was obtained and the detection limit was 0.17 μmol L⁻¹. The novel fluorescence sensor can be successfully used to detect tetracycline in real samples. This study provides a convenient strategy for selective recognition and rapid detection of tetracycline in the complex environment.     

Proton-Detected Solid-State NMR of the Cell-Free Synthesized α-Helical Transmembrane Protein NS4B from Hepatitis C Virus

Proton-detected 100 kHz magic-angle-spinning (MAS) solid-state NMR is an emerging analysis method for proteins with only hundreds of microgram quantities, and thus allows structural investigation of eukaryotic membrane proteins. This is the case for the cell-free synthesized hepatitis C virus (HCV) nonstructural membrane protein 4B (NS4B). We demonstrate NS4B sample optimization using fast reconstitution schemes that enable lipid-environment screening directly by NMR. 2D spectra and relaxation properties guide the choice of the best sample preparation to record 2D ¹H-detected ¹H,¹⁵N and 3D ¹H,¹³C,¹⁵N correlation experiments with linewidths and sensitivity suitable to initiate sequential assignments. Amino-acid-selectively labeled NS4B can be readily obtained using cell-free synthesis, opening the door to combinatorial labeling approaches which should enable structural studies.     

Process monitoring method based on correlation variable classification and vine copula

Chemical processes are becoming increasingly complicated, leading to an increase in process variables and more complex relationships among them. The vine copula has a significant advantage in portraying the dependence of high-dimensional variables. However, as the dimensions increase, the vine copula model incurs a high computational load; such pressure greatly reduces model efficiency. Relationships among variables in the industrial process are complex. Different variables may be strongly or weakly associated or even independent. This paper proposes a process monitoring method based on correlation variable classification and vine copula. The weighted correlation measure is first used to divide variables into a correlated subspace and weakly correlated subspace. Then, two vine structures, C-vine and D-vine, are applied to the correlated and weakly correlated subspaces, respectively. This method takes advantage of C-vine for correlated variables and the flexibility of D-vine for weakly correlated variables. Finally, comprehensive statistics are established based on different subspaces. Monitoring results of the numerical system and the Tennessee Eastman process demonstrate the effectiveness and validity of the proposed method.     

环境中污染源废气检测方法及影响因素分析

对污染源废气监测原理进行了简单分析,阐述了当前我国常用的环境中污染源废气检测方法,并对废气检测影响因素及质量控制进行了深入探究。     

氧气底吹熔炼氧枪浅析

系统地论述了氧气底吹熔炼氧枪的结构、工作原理、设计计算方法、材质及蚀损机理．指出了延长氧枪使用寿命的措施。     

AT89C2051芯片在车载产品中的应用

本文论述了采用单片机技术研制成功的泊车用超声波测距仪的基本原理,用AT89C2051作为控制器的实现方案,以及采用软件校正的方法,提高了测量精度和整机的可靠性.     

IDS告警融合与关联模型的研究

入侵检测是保障网络安全的重要手段,针对现有入侵检测系统中告警数量多、协调性差等问题,论文提出了一种具有告警融合与关联功能的告警处理系统模型,该模型冗余告警量少、整体检测能力强,并能进行攻击企图的预测,能有效提高入侵检测的效率,有助于进一步增强网络的健壮性。     

双河油田注入水适应性及注水井酸化解堵研究

考察了双河油田双河联、江河联注入水堵塞地层的因素;膨胀性黏土，悬浮固体颗粒。细菌及悬浮污油。含膨胀性黏土的双河南、双河北及不含膨胀性黏土的双江岩心粉，在注入水中相对于地层水中的体积膨胀度分别为14．5％、11．1％及0．02％；注入100PV不含悬浮颗粒的等体积比地层水、注入水混合水使双河、双江岩心渗透率分别下降7％和4％、9％和7％。注入水中悬浮颗粒引起岩心渗透率下降，粒径越大、颗粒浓度越大、注入量越大，则渗透率越低。在粒径2．1μm或颗粒浓度3mg／L前后下降幅度变化较大。注入水中硫酸盐还原菌引起岩心渗透率下降，含菌量越大则渗透率开始下降时的注水量越小，注入含菌50个／L的水100PV使岩心渗透率下降7％。岩心对注水合油量敏感，注入含油量20mg／L的水50PV使岩心渗透率下降20％。在岩心注水实验中渗透率下降最严重的是双河南岩心，其次是双河北岩心．江河岩心较轻，注入精细过滤水的双河北岩心渗透率下降大大减少．说明悬浮固体是造成注水堵塞的主要因素。为了解除双河油田注水井的堵塞，研制了含黏土稳定剂、缓蚀剂、铁离子稳定剂、互溶剂的土酸液，与南阳油田使用的低伤害酸液一起，用于1口注水井的解堵，效果良好。图7表4参5。