含损伤软化材料层合板承压时的分叉分析

本文讨论了由纤维和树脂-损伤应变软化材料组成的层合板在面内受压时的压缩分叉。用有限变开理论和半解析有限元法建立了相应的分叉方程,并进行数值模拟。计算结果表明,分叉将在损伤材料的应变软化阶段发生,为剪切带形分叉,损伤材料骨有剪应变集中,而且在纤维和树脂的界面附近有较大的剪应变突变等现象。     

“Technically Unavoidable” in Terms of Genetically Modified Organisms – an Approach for Food Control

In case of findings of authorized genetically modified (gm) plant ingredients below the 0.9 per cent threshold, exceptions from labelling requirements according to regulation (EC) No. 1829/2003 can only be made, “provided that this presence is adventitious or technically unavoidable”. The authors describe factors that should be considered regarding contaminations by gm plant ingredients as technically unavoidable or not. A practical approach for interpretation, taking into account quality control measures and documentation as well as present findings in comparable products is proposed. Received: February 23, 2007     

高含酸性气碳酸盐岩气藏流体敏感性实验研究

对川东北雷口坡组、嘉陵江组、飞仙关组、长兴组高含H，S及032的碳酸盐岩储层流体敏感性进行了实验研究，结果表明岩样速敏损害弱～强，水敏和盐敏损害中偏弱～极强，碱敏损害严重。岩石学分析揭示，川东北高含酸性气碳酸盐岩储层发育伊利石、微晶石英、白云石、方解石、硫化钙等潜在损害物质。钻井完井液侵入会破坏储层各物质间的原始动态平衡，诱发储层损害。主要损害机理为：①储层流体pH增加引起黏土矿物以及微晶石英失稳；②碱液与微晶石英、长石、白云石反应生成硅酸盐、高岭石、水镁石等新矿相；③流体矿化度改变可降低伊利石微粒间的连接力；④硫化钙水解产生OH^-，过量的OH-与Ca^2＋结合形成氢氧化钙沉淀；⑤储层含水饱和度和流体离子浓度改变，致使焦沥青脱附并在储层深部沉积；⑥硬石膏水化膨胀、分散运移。针对该气藏损害机理，可采用屏蔽暂堵技术以形成优质滤饼，有效降低储层流体敏感性损害。图5表2参10。     

龙开口水电站溢流坝段动力模型破坏试验研究

采用仿真混凝土材料研究了龙开口水电站溢流坝段在不同因素影响下的动力破坏特征,并通过对6个模型试验结果的分析探讨了溢流坝段的动力破坏机理。试验中考虑了坝体-库水的动力相互作用以及横河向地震动对大坝破坏的影响,采用规范谱波和场地谱波两种地震动激励进行模型超载破坏分析。试验结果为工程设计和评价溢流坝段的抗震性能提供依据。     

中山包水电站钢岔管设计

中山包水电站钢岔管在天生桥二级水电站 6号压力钢管下平段分岔 ,岔管HD值达 15 40m2 ,结构体形复杂 ,采用NK HITEN780A Z35和NK HITEN6 90B高强度钢材制造安装 ,在国内水电工程中实际应用较少。文章着重介绍岔管的布置、结构分析和焊缝的无损检验要求。中山包水电站的正常发电运行 ,为 80kg/mm2 级高强钢在国内水电行业的应用提供了第 3个成功实例     

Large-scale cooling towers as part of an efficient and cleaner energy generating technology

The present paper will outline the main aspects of the design and construction of cooling towers in Germany in the last decade. As part of electricity generating power plants, cooling towers play a significant role for the availability of reliable energy supplies, in a manner compatible with environmental requirements. They definitely belong to the largest and thinnest concrete structures at present. Because of the combined action of wind, thermal and moisture effects, special care has to be taken with regard to fatigue, cracking and corrosion to ensure an adequate level of safety and durability. Such a design strategy has been employed for the world’s tallest cooling tower at the Niederaussem power plant in Germany, with an overall height of 200 m and thickness values of 22–24 cm. Special considerations included the realistic non-axisymmetric distribution of soil characteristics, wind action due to interference effects (as determined by wind-tunnel tests), optimisation of the shell shape to improve structural and dynamic behaviour, injection of the cleaned flue-gas into the cooling tower, and the use of high-performance concrete (85 MPa) to improve shell resistance against acid attack by the cleaned flue-gas. The paper will present some results of an actual research project on this problem, which was conducted at the University of Wuppertal, to explore the use of high-performance concrete on design, stability and durability of cooling tower shells.     

推进波作用下的底泥起动

在介绍推进波作用下底泥起动特点的基础上，将上层水体作为粘性流体，底泥作为粘弹性体，推导了推进波作用下泥床面剪应力的表达式，并根据试验结果，给出了推进波作用下底泥起动时的床面剪应力与底泥流变参数的关系。     

BCC金属Nb的重离子辐射损伤研究

采用81 MeV碳离子辐照,模拟中子注量为10~(23)/cm~2的堆中子在Nb中产生的辐射损伤,用时间微分扰动角关联和正电子湮没二种方法研究辐射损伤及其高温退火效应。实验发现经注量2.5×10~(16)/cm~2的碳离子辐照后,在BCC金属Nb中产生单空位和双空位二种缺陷。随退火温度升高,双空位分解,单空位的总浓度逐步减小,经过1058K退火后,在Nb中由辐射损伤造成的缺陷消失。     

G104-5P42分支水平井钻井液工艺技术

G104-5P42井是在高尚堡G104-5区块构造较高部位部署的一口重点开发井，也是冀东油田第一口鱼骨型水平分支井，钻探目的是开发高浅北区Ng12油层，挖掘高浅北区井间剩余油潜力。该井主井眼斜深为2388m，水平位移为736．42m，水平段长243m，第一分支斜深为2342m，水平段长120．25m，水平位移为682．14m，第二分支斜深为2421m，水平段长117m，水平位移为761．73m。三开选用无固相甲酸盐聚合醇钻井液，在钻进油气层前加入GN-YBJ-I保护剂。应用结果表明，无固相甲酸盐聚合醇钻井液具有好的防塌能力和润滑减阻效果，性能稳定、黏度、切力较低，有利于减少环空压力损耗；在油气层段密度控制在1．08g／cm^3以内，为近年来同区块密度使用最低井，减小了有害固相及滤液对储层的伤害密度，经测试该井获高产油流；该井全井平均机械钻速为15．09m／h，钻井周期比原设计提前15d。该体系的配制及维护成本较高，适宜在目的层井段使用，但可回收再利用。     

全双极WTA模型的改进及其实现

提出了一种相似度的新定义，使双极ＷＡＴ模型的实现更加简洁明了。增加一个阈值使系统能判别非存储模式或因其信息量过低而无法鉴定的输入模式，阈值的大小与要求的容错能力有关。双极相似度及阈值通过光学方法实现。阈值的光学实现使系统仍具有照明不变性。通过电路实现取及ＷＴＡ网络的迭代运算。