配置高压共轨电控喷油系统的锡柴CA6110发动机性能研究

本文采用自行开发的高压共轨电控喷油系统在锡柴CA6110发动机上进行了匹配试验，摸索了电控系统关键参数对发动机性能的影响规律，并给出了详细的结果，通过对发动机进行的负荷特性和外特性对比试验结果表明，高压共轨电控喷油系统在提高发动机经济性和改善排放方面具有巨大潜力。本次试验积极有效的结果为该系统的实用化研究奠定了基础。     

Shock-induced phase transition of oriented pyrolytic graphite to diamond at pressures up to 15 GPa

In studies of shock-induced phase transition of ordered pyrolytic graphite to a diamond-like phase, the lowest transition onset pressure was observed at 19.6 GPa. The phase transition in that case was considered to be martensitic. In the present study ordered pyrolytic graphite with voids between particles was loaded at pressures up to 15 GPa using a planar shock wave propagating along the basal plane of the graphitic crystal structure. As a result, both diamond-like carbon and diamond were observed in the postshock sample. The phase transition of graphite to diamond was assumed to occur by the release of distortional energy stored in the graphite particles, that is, diffusional-controlled reconstructive mechanism, on the basis of the data by high resolution electron microscopy together with electron energy loss spectroscopy.     

Convective drying of wood-waste in air and superheated steam

The convective batch drying of Western Hemlock hog fuel-sized particles in fixed beds under various operating conditions quantiatively established the effect of factors which govern the drying process. A correlation was obtained for the Nusselt number during the heat transfer controlled period. Under specific conditions, the existence of a unified characteristic drying rate curve was confirmed. Drying behaviour as described by the receding plane model provided a mathematical expression for such a curve. The existence of an inversion point temperature was experimentally confirmed.     

20μm高灵敏浸没型碲镉汞红外探测器

报道了一种新型高灵敏浸没型ＨｇＣｄＴｅ红外探测器的研制，获得了Ｄ＾＊＝１．４６×１０＾１１ｃｍＨｚ＾１／２Ｗ＾－１，Ｒ＝６０８Ｖ／Ｗ，λｃ（２０％）－２０μ，灵敏元面积Ａ＝０．１２×０．１２ｍｍ＾２，和有效通光孔径ψ＝６ｍｍ的浸没型器件。     

VXIbus模块仪器在电路印制板故障诊断系统中的应用

本文介绍了一个由VXIbus模块仪器组建的用于电路印制板故障诊断的自动测试系统,具体的讨论了组建中的主控计算机和接口控制器的选择及被测单元与自动测试设备之间通用接口设计等问题。在文章的最后,给出了测试软件设计实例。实际应用表明,VXIbus模块仪器的应用,为电路印制板故障诊断系统提供了优良的测试性能,使系统的实用行、通用性、灵活性及自动化程度得到了明显的提高。     

Hg_（1－x）Cd_xTe的扫描光致发光研究

用傅里叶变换红外扫描光致发光方法研究了Ｈｇ１－ｘＣｄｘＴｅ体单晶样品，该方法可直接得到ＨｇＣｄＴｅ晶片组分的二维平面分布，并可得到辐射复合在复合机制中所占比重的平面分布，以及晶体中非平衡载流子寿命的分布     

应用光度分析法测定铁和渣中的微量镓

用光度分析法测定镓，为适应多种试样的测定，补做了个别条件试验。用该方法测定了铁、渣、浸钒渣等六种不同类型试样中镓的含量，分析其精度精度符合要求。     

施工系统中混凝土拌和工厂位置选择综合评价模型

在大型水利水电工程施工系统中，混凝土拌和工厂位置选择涉及大量不确定性因素，本文用可能性－满意度来描述决策者对不确定性估计的主观性和管观性，论述了可能性与模糊集，满意度与信任度的对应关系，给出了可靠性－满意度的计算方法。以系统分析的层次性原理为基础，建立了厂址选择的综合评价模型，通过一个实例分析，得到几点结论。     

THE ANALYSIS OF THE SEPARATED LAYERS ALGORITHM BY DOMAIN DECOMPOSITION METHOD

From the principle of of the Domain Decomposition Method (DDM), we analyse the 2nd-order linear elliptic partial differential problems and link the Separated-Layers Algorithm (SLA) with DDM. The mathematical properties of SLA and numerical example are presented to obtain satisfactory computation results. For general linear differential ones, also are the structure of SLA and its characteristics discussed.     

铁铝酸盐复合膨胀水泥化学预应力机理及其应用研究

本文阐述铁铝酸盐自应力混凝土的主要物理力学特征.研究了限制膨胀应变与配筋率之间的定量函数关系.通过正交试验和方差分析,确定了复合外加剂对其性能的影响.针对其在自应力管中的应用,提出多层中空圆柱理论计算模型,按弹性理论计算出自应力管初始应力分布规律.对比以前的线性理论计算误差,给出相应的修正系数.本文对类似的自应力混凝土,具有普遍的指导意义.