开采沉陷中采深偏移系数的性质分析

在处理倾斜煤层的开采沉陷数据时,往往采用平均采深代替走向主断面实际开采深度,此时存在着采深偏移系数的情况,不可避免地造成了开采沉陷预测的不准确性.为了提高开采沉陷预测精度,通过理论推导,给出了采深偏移系数计算公式,分析了上覆岩层岩性、煤层倾角、松散层厚度等地质采矿条件对采深偏移系数的影响.同时,结合11个矿区的开采工作面资料,求取了以平均采深代替走向主断面实际采深时各地表移动变形值的偏差.结果表明,采深偏移系数随着覆岩强度和煤层倾角的增加而增加,随基深比的减小而减小.当煤层倾角达到20°以上时,应该考虑采深偏移系数对各移动变形值造成的影响,为矿山开采沉陷准确预测提供参考.     

自我强化的基于身份的广播加密方案

为了有效解决广播加密系统中的密钥泄漏和密钥管理的问题,提出了一个新的实用的基于身份的广播加密方案。利用超椭圆曲线上的双线性对构造广播加密和解密算法,节省了广播通信传输带宽。引入了密钥自我强化保护机制,在分配用户密钥时通过用户的机密信息计算其解密密钥,降低了用户为保护自己的利益而泄漏其密钥的可能性。证明了方案在扩展的k元BDHI假设下对抗k用户合谋攻击的安全性     

聚合物微球在油田深部调驱技术中的研究进展

深部调驱技术作为目前提高低渗非均质油藏采收率的有效办法之一,聚合物微球因具有良好的封堵性能和深入性能得到了广泛研究。本文详细介绍了聚合物微球在地层中的深部调驱机理,介绍了聚合物微球的制备方法,综述了聚合物微球的研究内容和研究现状,并指出引入纳米材料合成功能性聚合物微球能有效解决聚合物微球的稳定性,对低渗油藏后期开发具有重要意义。     

Investigation of Creep Feed Grinding Parameters and Heat treatment Effects on the Nickel-base Superalloys

The Nickel base Superalloys are the most famous complicated and useable of Superalloys to make hot zone components of the gas turbines. The complicated dimensional tolerances, specially at the root of the blade show importance of grinding processes at the production of blades root. The prediction of the effect of machining parameters on the soundness of component surface strengthening for reaching to a suitable surface finishing and avoiding from crack formation at the work part during machining operation often is not easy and feasible so needs to more industrial investigation.This research is about frame 5 blade designed by GE and made from Superalloy IN738LC has been investigated. The formation of a plastically deformed and heat affected zone during grinding of Superalloy IN738LC with a high depth of cut but slow work speed (creep feed grinding) was investigated. Parameters such as work speed, depth of cut and radial dressing speed have been considered as variables and their effects have been studied. During experimental performed, the voltage and current of motor measured and power and special energy calculated.Some samples heat-treated (of the 1176℃ for 1 hr under neutral argon gas and cooling rate of 15℃/min up to 537℃ and then air cooling) to study grains recrystallization. Other samples have been created from the roots of blades and then coated by Nickel to measure boundary layer micro-hardness. The results show that increasing work speed leads to increasing the use power. Increasing the depth of cut, by increasing material removal rate, and the radial dressing speed, by decreasing power, lead to decreasing special energy. The temperature created by grinding lead to decreasing plastic deformation and boundary layer formation. When the radial dressing speed changes from 1 to 0.6μm/rev and other parameters are kept unchanged the roughness of surface increases and the special energy decreases. Sufficient dressing is very essential in limiting the width of the molten zone to few micrometers. As a result, it was found that local melting at contact spots to be a rather common mechanism during grinding of superalloys, lead to so-called white layers which can easily be observed on metallographic cross sections.     

TIG焊和PAW焊中活性剂对焊缝熔深的影响

针对常规TIG焊生产效率低、熔深小等问题，研究了TIG焊和PAW焊中应用活性剂对焊缝熔深的影响。结果表明，应用活性剂后，在同样的参数下，同传统TIG相比，活性剂能够大幅度提高不锈钢、铝合金和钛合金的焊缝熔深。对于PAW焊，熔深也有增加，但是增加的幅度不如TIG效果明显，但对焊缝成形有很好的改善。同时，活性剂对铝合金焊接背面能够起到保护作用。对于钛合金，活性剂除了增加焊缝的熔深外，还能够大幅度地消减焊缝产生的气孔。     

Processing map for hot working of as extruded AZ31B magnesium alloy

The deformation behavior of AZ31B magnesium alloy as extruded under hot compression conditions was characterized in the temperature range of 200 - 400 ℃ and strain rate range of 0. 001 - 1 s^-1. The processing maps were obtained at different strains. The results show that the map exhibits flow instabilities as two domains. The domain at beyond 300 ℃ and strain rate of 1 s^-1 appears with a peak efficiency of power dissipation about 56% occurring. This domain is expected to happen in a hot process, such as hot rolling, hot extrusion and hot forging. There is high efficiency of power dissipation at temperature beyond 350 ℃ and strain rate 0. 001 s^-1. Such domains suggest the occurrence of superplastic deformation.     

Oxidation behavior of 2.25Cr-1Mo steel with prior tempering at different temperatures

The oxidation behavior of a normalized 2.25Cr-1Mo steel tempered previously for 10 hr at different temperatures between 873 and 1023 K has been studied up to a maximum duration of 1000 hr in air at 773–973 K. The oxidation resistance of the steel was found to decrease significantly with the temperature of tempering. Tempering of this steel is reported to cause microstructural changes involving precipitation of Cr as carbides and a decrease in the effective (free) Cr contents, that could influence the oxidation resistance of the Cr-containing alloys. Relative compositions across the thickness of the oxide scales, as analyzed by SEM/EDX and SIMS, suggest that a less Cr-rich (and less protective) and thicker scale on the steel formed because previous tempering caused extensive depletion of free Cr.     

Thin-skin analysis technique for interaction of arbitrary-shape inducer field with long cracks in ferromagnetic metals

In using the AC field measurement (ACFM) technique for non-destructive evaluation (NDE) of metals, a current-carrying wire structure is used to induce eddy current within a thin layer of the metal and a magnetic field sensor to measure the field perturbations in the vicinity of the metal. The sensitivity of ACFM crack detection and sizing relies on an appropriate design of the wire structure geometry together with a dully placement of the sensor. This paper presents an analytical modeling technique for evaluating the electromagnetic field interaction of an ACFM probe with a long uniform crack in a ferromagnetic metallic slab. The probe in the proposed model can have an arbitrary-shape wire inducer with no restrictions on its relative sensor position. The technique is accurate and very efficient computationally. It first uses the two-dimensional Fourier transform to obtain the field distribution at the metal surface. The Laplacian field distribution above the metal is then determined by satisfying the so-obtained boundary condition at air–metal interface. To demonstrate the accuracy of the model, we consider the special case of a rhombic wire inducer. The comparison of our results with those obtained using the conventional algorithm in the literature validates the accuracy of the model introduced in this paper. To show the generality of the model, we also present theoretical and experimental results associated with a solenoid inducer with a three-dimensional geometry for which no analytical solution is available in the literature. The theoretical prediction of crack signal supported by experimental results is used to develop a model-based method for inverting crack signal into crack depth.     

硬质合金磨削温度的实验研究

采用半人工和人工热电偶法，对硬质合金YG6和YT30平面磨削的磨削温度进行了实验研究。并对磨削参数与磨削温度的关系，进行了理论分析及实验验证。结果表明：磨削深度和工作台速度增加，磨削温度升高，但工作台速度的改变，对磨削温度的影响较小．     

影响冷硬铸铁轧辊白口层深度主要因素的回归分析

探讨了影响冷硬铸铁轧辊白口层深度的主要因素。运用数理统计回归分析方法对大量原始生产数据进行处理 ,求得生产条件下冷硬铸铁轧辊白口层深度与主要工艺参数之间的线性关系 ,并进行了理论分析