低温SBR系统活性污泥硝化效能的pH调控

为进一步提高低温(15 ℃)SBR系统的硝化效能,通过间歇培养实验探讨pH对系统活性污泥硝化效能的调控与影响．结果表明,将初始pH控制为8.0～9.0,低温SBR系统的活性污泥(以MLSS计)具有最佳的氨氮氧化能力,在NO₂--N积累阶段对NH₄+-N的比去除速率可达25.49 g·kg-1·d-1,NO₂--N的比生成速率达22 g·kg-1·d-1;初始pH为7.5～8.0时,NO₂--N氧化效果最佳,NO₃--N的比生成速率可达35.6 g·kg-1·d-1;将反应系统的pH维持在8.0,可使亚硝酸菌和硝酸菌代谢活性均保持在较高水平,达到良好的硝化效果．     

不同曝气剪切条件下活性污泥絮体特性研究

采用轮流搅拌-曝气SBR系统模拟两种不同曝气方式(分点曝气和分段曝气),研究其形成的污泥絮体特性.结果表明:在相同的运行条件下,分点曝气形成的污泥絮体尺度大、沉降性能好,两者的SVI平均值分别为133mL/g和202mL/g,平均粒径分别为74.26μm和53.46μm,而且分点曝气中拥有更多的大颗粒絮体;分点曝气形成的污泥絮体稳定性优于分段曝气,在连续曝气条件下,两种污泥絮体均受到剪切破碎,不仅初始粒子被剥离,而且絮体也被打碎变小,但分段曝气被破碎的程度更大;分点曝气和分段曝气所形成的污泥絮体的EPS含量分别为31.21mg/gVSS和21.6mg/gVSS,且前者EPS中的多糖、蛋白质和DNA组分均比后者多,两者EPS的主要组分以蛋白质为主.两种污泥经连续曝气3h后,EPS皆增大,且多糖含量增加较多;分点曝气和分段曝气形成的污泥比阻分别为5.21×1012 m/kg和7.94×1012 m/kg,前者污泥的脱水性能较好.经连续曝气3h后,两种污泥的比阻明显增大,脱水性能变差.     

固化淤泥土压缩性试验研究

淤泥由于含水率高强度低,无法直接作为工程用土。对淤泥进行固化处理,可以实现废弃淤泥的资源化利用。选择常州市武进区废弃淤泥作为研究对象,利用42.5普通硅酸盐水泥作为固化添加剂,通过固化淤泥的单向压缩试验,探讨4种水泥参量变化条件下共24个试样的压缩变化机理,描述水泥添加量对压缩模量的影响,分析其影响规律。通过试验对比分析,可知：同一含水率下,淤泥随着水泥参量的增加,试样压缩性减小;各试样在压缩试验过程中,其压缩变形规律基本一致,荷载达到200kPa时,其压缩性趋于稳定;随着固结压力的不断增加,沉降变形量逐渐减缓,最后趋于收敛;随着水泥参量的增加,同一应力条件下,试样稳定需要的时间缩短;淤泥固化效果在水泥参量接近50%时较优,超过此数值,强度虽提高,固化工作经济效益降低。     

超声场强化污泥对流干燥热湿耦合迁移过程的数值模拟

为理论上有效预测超声作用对污泥对流干燥过程的影响,基于非平衡热力学理论,建立了超声场作用下污泥对流干燥热湿耦合迁移过程的数学模型.对不同声能密度作用下污泥内部温度及湿度场分布进行数值模拟.结果表明,超声作用可以有效加速污泥内部的湿迁移过程,但超声强化效果随污泥厚度增大而逐渐减弱.此外,超声热效应使污泥温度有所升高,但污泥内部的温度梯度却略有降低,因此,污泥内部由温度梯度引起的湿分扩散并未因超声波作用而得到强化.     

基于骨架构建污泥固化体收缩与开裂特性的研究

针对传统污泥固化方法中固化污泥体易收缩开裂等问题,基于骨架构造原理,用煤矸石作为骨料,加入水泥、生石灰、粉煤灰等固化材料,按照不同配比对污泥进行一系列的固化实验。考察了在28 d养护龄期污泥固化结实体的开裂与收缩特性。研究表明加入煤矸石作为骨料能有效地抑制固化污泥的收缩与开裂,生石灰能抑制开裂,粉煤灰对污泥固化体的收缩开裂特性影响较小。     

Biosorption behaviors of Cu~(2 ),Zn~(2 ),Cd~(2 ) and mixture by waste activated sludge

1Introduction Waste activated sludge is the by-product of sewage treated by activated sludge process.According to incomplete statistic,in China sewage discharge amount is4.474×107m3/d[1],and there are more than100sewage treatment plants with different sc…     

筛分技术在城市河道疏浚污泥处置中的应用研究

对筛分技术应用于城市河道污泥进行探索研究,在对城市河道污泥的工程特性分析的基础上,对不同的筛分设备用于城市河道污泥进行全面分析,并将筛分技术应用于工程实践中,取得了良好的效果,为城市河道污泥预处置中遇到的难题提供了良好借鉴。     

Predictive control of an activated sludge process: An application to the Viikinmäki wastewater treatment plant

In this work, we discuss the application of multivariable predictive control for the activated sludge process in a full-scale municipal wastewater treatment plant. Emphasis is given to the selection of a control configuration that contributes to minimising the economic costs while improving the removal efficiency of the nitrogen compounds. For this task, a simple dynamic matrix control algorithm is favoured for controlling the nitrogen concentrations at the end of the biological process. The behaviour of the activated sludge process is reproduced in a commercial simulator that acts as a real-time testing platform and that is also used for identifying the multivariable input–output models for the predictive controller. For demonstrating the effectiveness of the proposed approach, different control configurations are considered and compared against the aeration control strategies currently used at the plant. Based on the simulation results, this work shows the potentiality of the dynamic matrix control which is able to decrease the energy consumption costs and, at the same time, reduce the ammonia peaks and nitrate concentration in the effluent.     

A/O系统中活性污泥组成细菌的分离与鉴定

通过菌胶团破碎、混合细菌分离纯化、单一菌种生理生化特性研究等工作，从厌氧／好氧(Anoxic／Oxic，简称A／O)工艺活性污泥系统中分离出8种细菌并分别鉴定出其属别，其中普通细菌3种、亚硝化细菌4种和硝化细菌1种。在A／O工艺进水水质出现波动和需要调节出水质量的情况下，参照各种细菌的固有特性，调节和控制生产工艺参数，可迅速而有效地保证和提高A／O工艺处理化工生产废水的效果。     

Structure of Crack in Thermally Dried Sludge Cake

We examined in this work the drying characteristics of wastewater sludge, considering the weight loss using an electronic balance and the morphology change of drying cake by an X-ray micro-computerized tomography scanner (micro-CT). The drying rates for sludge cake was 50-60% of the pure water test. The corresponding micro-CT images were scanned to explore the change in cake volume and development of internal crack over drying. The Otsu's method was applied to bilevel the scanned images, based on which the three-dimensional model for crack's internal structure was reconstructed. The cake porosity and the geometric factors of cracks, such as the compactness, the boundary fractal dimension, and the Sierpinski carpet fractal dimension, were evaluated. The shrinkage of cake volume and the development of internal crack occurred simultaneously. The skin layer formed by the former mechanism retards further drying. On the other hand, the internal cracks were shown to exhibit zigzagging with a noncircular cross section and fractal-like boundary, which should be able to enhance local drying. A possible role of change in crack structure on the rate of drying was discussed.