基于G1-CRITIC-云物元法的风电集群有功控制策略综合评价

为全面衡量风电集群有功控制效果、合理筛选控制方法使其综合性能最优,提出基于G1-CRITIC-云物元法的风电集群有功控制策略综合评价方法。首先,从安全稳定性、经济性、利用水平3个方面构建评价指标体系;其次,基于G1-CRITIC法对指标进行权重分配;最后,引入云物元理论实现评价等级边界的模糊化并计算控制策略的综合等级隶属度,有效提升评价结果的合理性与准确性。案例分析验证了所提方法的有效性。     

Energy coupled to matter for magnetic alignment of rare earth–doped alumina

Energy coupled to matter (ECM) concepts such as magnetic field–assisted processing were used to align rare earth–doped alumina ceramics in the presence of applied fields. The addition of gadolinium and ytterbium dopants to alumina increased the magnetic susceptibility anisotropies, and induced magnetic torques that led to significant alignment of ceramic particles under the application of magnetic fields as low as 1.8?T. In comparison, undoped alumina materials showed minimal alignment under applied field strengths as high as 9?T. Density function theory modeling indicated that the specific dopant type dictated changes in the magnetic properties of different rare earth–doped alumina systems by directly affecting the magnetic moment localization and magnetocrystalline anisotropy.     

High‐Temperature Particulate Matter Filtration with Resilient Yttria‐Stabilized ZrO2 Nanofiber Sponge

Particulate matter (PM) is a major air pollutant in many regions, jeopardizing ecosystems and public health. Filtration at pollutant source is one of the most important ways to protect the environment, however, considering the high‐temperature exhaust gas emissions, effective removal of PM and related pollutants from their sources remains a major challenge. In this study, a resilient, heat‐resisting, and high‐efficiency PM filter based on yttria‐stabilized ZrO₂ (YSZ) nanofiber sponge produced with a scalable solution blow spinning process is reported. The porous 3D sponge composed of YSZ nanofibers is lightweight (density of 20 mg cm^?3) and resilient at both room temperature and high temperatures. At room‐temperature conditions, the YSZ nanofiber sponge exhibits 99.4% filtration efficiency for aerosol particles with size in the range of 20–600 nm, associated with a low pressure drop of only 57 Pa under an airflow velocity of 4.8 cm s^?1. At a high temperature of 750 °C, the ceramic sponge maintains a high filtration efficiency of 99.97% for PM_0.3–2.5 under a high airflow velocity of 10 cm s^?1. A practical vehicle exhaust filter to capture particles with filtration efficiency of >98.3% is also assembled. Hence, the YSZ nanofiber sponge has enormous potential to be applied in industry.     

Light‐Activated,Multi‐Semiconductor Hybrid Microswimmers

Using a dynamic fabrication process, hybrid, photoactivated microswimmers made from two different semiconductors, titanium dioxide (TiO₂) and cuprous oxide (Cu₂O) are developed, where each material occupies a distinct portion of the multiconstituent particles. Structured light‐activated microswimmers made from only TiO₂ or Cu₂O are observed to be driven in hydrogen peroxide and water most vigorously under UV or blue light, respectively, whereas hybrid structures made from both of these materials exhibit wavelength‐dependent modes of motion due to the disparate responses of each photocatalyst. It is also found that the hybrid particles are activated in water alone, a behavior which is not observed in those made from a single semiconductor, and thus, the system may open up a new class of fuel‐free photoactive colloids that take advantage of semiconductor heterojunctions. The TiO₂/Cu₂O hybrid microswimmer presented here is but an example of a broader method for inducing different modes of motion in a single light‐activated particle, which is not limited to the specific geometries and materials presented in this study.     

车用柴油机电控喷油系统齿条位移反馈控制研究

介绍了齿条位移反馈控制器的设计,包括开环系统性能分析、系统建模和控制参数整定。设计的直接数字式ＰＩ控制器使得闭环控制系统的静、动态特性满足柴油机喷油电控的要求。     

大功率柴油机机体隔板三维有限元强度分析

横隔板是大功率Ｖ型柴油机机体的承力系统．本文运用有限元法对其强度进行了三维数值分析,模型中考虑了工作载荷和装配力的共同作用,以及结构的接触问题,得出了结构的应力和变形参数,为机体的设计提供了依据．     

利用光闪烁现象进行粉尘排放的监测

粉尘排放监测系统正在各国推广应用,新的方法也不断出现．本文提出一种基于光闪烁现象的粉尘排放监测方法．同光透射法相比,这种新方法具有测量精度高、不怕污染、成本低的特点．实验结果表明,测量系统的输出与粉尘排放的浓度呈线性关系．     

直喷式柴油机缸内燃空混合过程的计算机模型

本文推出了一个直喷式柴油机缸内燃空混合过程的新模型,该模型提出了燃空混合过程“两个时期、三个阶段”进行计算的新设想,将该模型用于直喷式柴油机缸内污染物生成历程的模拟计算并与实验结果比较表明,该模型是合理的。     

PM10 remote sensing from geostationary SEVIRI and polar-orbiting MODIS sensors over the complex terrain of the European Alpine region

The subject of this study is to investigate the capability of spaceborne remote sensing data to predict ground concentrations of PM₁₀ over the European Alpine region using satellite derived Aerosol Optical Depth (AOD) from the geostationary Spinning Enhanced Visible and InfraRed Imager (SEVIRI) and the polar-orbiting MODerate resolution Imaging Spectroradiometer (MODIS). The spatial and temporal resolutions of these aerosol products (10 km and 2 measurements per day for MODIS, ∼ 25 km and observation intervals of 15 min for SEVIRI) permit an evaluation of PM estimation from space at different spatial and temporal scales. Different empirical linear relationships between coincident AOD and PM₁₀ observations are evaluated at 13 ground-based PM measurement sites, with the assumption that aerosols are vertically homogeneously distributed below the planetary Boundary Layer Height (BLH). The BLH and Relative Humidity (RH) variability are assessed, as well as their impact on the parameterization. The BLH has a strong influence on the correlation of daily and hourly time series, whilst RH effects are less clear and smaller in magnitude. Despite its lower spatial resolution and AOD accuracy, SEVIRI shows higher correlations than MODIS (r_SEV∼ 0.7, r_MOD∼ 0.6) with regard to daily averaged PM₁₀. Advantages from MODIS arise only at hourly time scales in mountainous locations but lower correlations were found for both sensors at this time scale (r∼ 0.45). Moreover, the fraction of days in 2008 with at least one satellite observation was 27% for SEVIRI and 17% for MODIS. These results suggest that the frequency of observations plays an important role in PM monitoring, while higher spatial resolution does not generally improve the PM estimation. Ground-based Sun Photometer (SP) measurements are used to validate the satellite-based AOD in the study region and to discuss the impact of aerosols' micro-physical properties in the empirical models. A lower error limit of 30 to 60% in the PM₁₀ assessment from space is estimated in the study area as a result of AOD uncertainties, variability of aerosols properties and the heterogeneity of ground measurement sites. It is concluded that SEVIRI has a similar capacity to map PM as sensors on board polar-orbiting platforms, with the advantage of a higher number of observations. However, the accuracy represents a serious limitation to the applicability of satellites for ground PM mapping, especially in mountainous areas.