Soemmerring’s Rings Developed around IOLs,in Human Donor Eyes,Can Present Internal Transparent Areas

Soemmerring’s rings consist of a ring of lens epithelial derived cells that grow along the periphery of an aphakic lens capsule, or around an intraocular lens. These rings when visualized frontally, appear opaque, however, in some cases the cells that compose these rings are organized in the same fashion as those in normal transparent adult lenses. Thus, our purpose was to test whether any part of the adult Soemmerring’s ring could be transparent and how this related to morphological factors. To study this, 16 Soemmerring’s rings were extracted from donor eye globes. After imaging, they were thickly sectioned sagittally in order to analyze the degrees of transparency of different areas. All samples were also histologically analyzed using alpha smooth muscle actin, Vimentin, wheat germ agglutinin and DAPI. Our results showed that many samples had some transparent areas, mostly towards the center of their cross-section. Of the factors that we analyzed, only lens fiber organization at the bow region and an increased area of mature lens fiber cells had a significant relation to the degree of transparency at the center. Thus, we can conclude that as Soemmerring’s rings mature, they can develop organized and transparent areas of lens cells.     

激光靶散射光观测镜杂散光抑制研究

分析了系统杂散光的来源,得出非成像光束对系统影响较大、平板玻璃窗产生的鬼像不容忽视的结论.针对传统作图法设计遮光罩的针对性不强,且追迹不同入射角的光线繁琐、容易遗漏的问题,本文提出一种逆向追迹法,依据光的可逆性,在像面处设置点阵面光源,每一点都发出充满系统孔径的光束,在物面设置足够大的探测面,使之有充足的余量记录所有到达物方的光线,利用该方法可以在探测面上直观她区分出非成像杂散光.有针对性地设计了具有特殊要求的内外遮光罩,并对遮光效果进行了软件模拟.     

低耦合损耗的光电混合光纤旋转连接器

设计了一种光电混合光纤旋转连接器,能实现相对旋转的光信号在较大对准误差范围内低损耗连接.旋转状态下的自聚焦透镜准直光纤输出的光信号,并由PIN光电探测器将其转换为电信号,冉由激光器根据电信号再生出原始光信号继续在光纤通讯系统中传输.该光电混合光纤旋转连接器在离轴偏移量至520μm或对准倾斜角至0.5°时的附加耦合损耗为0.3 dB,而采用双自聚焦透镜的光纤旋转连接器要获得小于3 dB的插入损耗,其离轴偏移或倾斜角度必须小于100 μm和0.10°相比之下,本文设计的光纤旋转连接器能降低系统对机械加上及装配精度的要求,具有较高的实用价值.     

远心镜头在回转体测量系统中的应用

介绍了一种接触测量和非接触测量相结合的回转体测量系统,分析了远心镜头在非接触测量部分的应用。阐述了回转体测量系统的结构和测量方案;讨论了待测回转体的特性参数,指出为了提高测量速度需尽可能采用非接触测量方法;使用远心镜头和平行光源进行了相关实验。结果表明:远心镜头的平行投影能有效地解决回转体工件平面特征成像轮廓线的干扰问题。     

LD抽运复合YAG晶体温度场及热透镜效应研究

为了研究复合Nd:YAG激光晶体棒在端面抽运下的温度分布及热透镜效应,采用数值分析法得到了端面抽运激光晶体棒内温度场的数值解,当抽运光功率为18W、光斑半径0.2mm时,吸收系数为3.5/cm的复合晶体内最大温度为73.8℃;同时还得到了径向梯度折射率引起的轴向传播光相位延迟分布ΔΦt(r),并与相同条件下的普通晶体作了比较.结果表明,采用复合晶体可以大幅度降低激光晶体内的温升,并减小端面变形导致的透镜效应;复合晶体内的相位延迟分布ΔΦt(r)与普通晶体的相似,且不满足对半径r的二次方关系;热透镜和参考球面镜透镜的相位延迟分布之间存在畸变Δφ,在r较小(rp)时,相位延迟分布ΔΦt(r)可近似等效于一球面透镜,其等效焦距fGRIN值与普通晶体的接近,在r较大(r>wp)时,畸变Δφ随r增大而急剧增大.     

基于P89C668单片机的航空数码相机控制系统

以 P89C668 单片机为核心,介绍了一种自主开发的航空数码相机的控制系统,合理利用单片机的固有资源,相互配合完成了相机镜头控制:光圈控制,快门控制;数据异步通讯:开关命令的采集和拍摄状态信息的回传;PC 方式对 CCD 驱动单元配置等多项功能,并编写了相应的控制软件.控制系统模块设计清晰,工作稳定可靠,成功的以单片微型计算机实现了航空相机多项控制功能的要求,为系统功能的进一步开发提供了充足的硬件资源和软件平台,是一个实用的航空数码相机控制系统.     

基于ROC曲线的镜片舒适度眼动指标研究

基于眼动仪检测到的受试者眼动数据,提出一项新的眼动指标——眼睑间距变动百分比,并对比传统的眼跳次数、瞳孔直径等眼动指标,经过显著性和相关性分析后,最后利用受试者特征曲线（Receiver operating characteristic,ROC）曲线评价每个眼动指标对镜片舒适度的判别性能。实验结果表明,本文提出的眼睑间距变动百分比反映镜片舒适度的性能最好,瞳孔直径次之,眼跳次数和平均注视时长相仿。本实验结果证明可以通过检测患者的眼睑间距变动百分比,来准确快速地判断镜片的舒适程度。这项研究成果能帮助相关从业者从更加客观的角度评价镜片的舒适程度,也为中国当前日益严峻的近视防控形势提供了一定的技术理论帮助。     

3D‐printed cylindrical Luneburg lens antenna for millimeter‐wave applications

A 3D‐printed cylindrical Luneburg lens antenna working at 26 GHz is proposed in this article. The antenna consists of a feeding waveguide, a 3D‐printed cylinder, and a pair of printed metal grids which are stuck on the side faces of the cylinder. 3D‐printed structure ensures the convenience for processing and structural integrity of the Luneburg lens. Hole drilling technology is utilized for the design of the cylindrical lens. In the E‐plane, conversion of spherical waves into planar waves is achieved based on the gradient refractive index which is realized by the gradient equivalent relative dielectric constant. The main part of the lens contains a hole drilling region to realize the desired equivalent permittivity from 1.23 to 2, while another gradual‐thickness region realize the permittivity ranges from 1.23 to 1. H‐probe method is utilized for the optimization of the gradual‐thickness region in this article. And for the H‐plane, with the grids, H‐field distribution is optimized compared with the Luneburg lens antenna without the loading grids. Thus, the side lobe level (SLL) in H‐plane could be reduced. Meanwhile, a narrower half power beamwidth (HPBW) in H‐plane will be obtained due to the metal grids. Experiment results illustrate the feasibility and validity of the proposed 3D‐printed cylindrical Luneburg lens antenna.     

路基非饱和土抗剪强度的吸力效应

从宏观的吸力控制型直剪试验和微观的土体颗粒结构2方面入手,对路基非饱和土抗剪强度的吸力效应进行了研究。在不同吸力和不同法向应力条件下完成4组剪切试验,并选取2种不同含水量的同类型土样进行结构扫描。研究结果表明,与粘性土不同的是,当粉质砂土含水量逐渐降低时,土体基质吸力对土体抗剪强度的贡献效果并不是一直增加的,而是存在一个峰值。这种现象主要是由于土体微观结构以及所含水分的存在形式所造成的。另外,土体所处的应力环境也会对土体强度的吸力贡献情况造成影响。     

1300万像素手机镜头设计

为满足高像素手机的要求,本文根据光学成像理论,利用code V软件设计出一种1300万像素手机镜头。为了增加自由度,减小像差,得到更好的像质,本文采用非球面表面进行光学设计。该镜头由五片非球面镜片、一片滤光镜组成。设计得到光圈值2.2,半视场角35°,有效焦距3.6 mm,镜头总长3.6 mm的轻薄型手机镜头。最终中心视场在中间频率处(即223 lp/mm)的MTF值大于0.6,在高频处大于0.2,在0.8视场中频MTF值大于0.4,可见优化完毕后成像效果可满足使用要求。