Hardness and Fracture Toughness of SiC-Particle-Reinforced MoSi2 Composites

The indentation technique has been used to evaluate the hardness and fracture toughness of SiC-reinforced MoSi₂ composites made by hot-pressing. It is seen that the toughness increases with increasing indentation crack length (under increasing load) and a probable mechanism responsible for this behavior is described. It is also observed that there is an optimum volume fraction of SiC particles for which the maximum fracture toughness of the composite can be achieved.     

基于CSY型传感器的悬臂力学试验确定材料弹性模量的方法

对在CSY型传感器综合实验仪上拓展悬臂梁力学实验进行了研究,研究了在该实验仪上实现材料弹性模量的测定.通过材料力学的理论推导出悬臂梁弹性模量与其受力和挠度比值的关系,通过应变式传感器的实验确定出悬臂梁受力与其挠度的比值关系,进一步可推导出悬臂梁材料的弹性模量,并验证了该方法的可行性及有效性.该方法集合了电阻应变效应、全桥差动电路等传感器电测技术以及材料弹性力学、悬臂梁结构力学的基础知识,具有综合应用性.同时,对高校实验室如何有效利用设备资源、开发拓展型实验有一定的示范作用.     

基于RFID技术的仓库综合管理系统

为保证大型物流企业仓库的安全,提高仓储效率,提出了一种基于RFID技术构建综合仓库管理系统的思路与方法.系统具有报警功能,可对货物自动进行存储统计.介绍了系统的结构、模块的功能、硬件设计以及软件设计的系统流程,阐述了基于动态二进制的系统防碰撞算法.     

光源谱宽通过光纤色散对AOCS输出的影响

基于光纤色散引起的脉冲展宽效应,在理论和实验上研究了有源光学电流传感器（AOCS）中宽带光源对系统输出的影响．理论结果表明：对于长度为500m的光纤,当光源谱宽在40—60nm之间变化时,多模光纤传输下的脉冲展宽范围在0．5～0．8ns,单模光纤传输下的脉冲展宽范围在2×10^-5～4×10^-5,信号衰减量对系统输出影响很小,且随光源谱宽的增加而有微弱的增加,实验与理论相符合．     

On the oxidation kinetics and mechanisms of various SiC-coated carbon-carbon composites

SiC coatings on the surface of C-C were produced by either silicone resin impregnation/ pyrolysis or reaction sintering. Cycles of resin impregnation/pyrolysis produced an SiC coating, on the walls of fine open pores, which was effective in reducing the oxidation rate of C-C and in shifting the transition temperature to a higher value. Unless it is pre-coated with a pyrocarbon layer before sintering, plain reaction sintered SiC has oxidation behaviors similar to those of the above-mentioned SiC. The dense pyrocarbon film deposition on the surface of C-C could form a better SiC film than others. The carbon film homogenized the surface of C-C and a dense SiC film was established. The oxidation of the coated C-C can be modelled by a set of “oxidation resistors” in series and/or in parallel, with each resistor corresponding to an oxidation element. The controlling mechanism can be resolved from the activation energy. A combined resistant layer, consisting of resin impregnation, pyrocarbon film and reaction sintering SiC, showed the best oxidation resistance of any single-layer coated C-C composite.     

A social interaction system based on cloud computing for mobile video telephony

As the use of smartphones become popular,people heavily depend on smartphone applications to deal with their social activities.For this reason,traditional message texting between mobile applications does not fulfill the versatile requirements of social networking.Many mobile applications use multimodality to deliver multimedia messages including sticker,voice and photo message,video call,and snap movie to enhance the communicative capability.However,without face-to-face interaction,people may fail to detect the other side’s non-verbal social behavior such as fine-grain facial expressions,body movements,or hand gesture.During social interaction,non-verbal behavior conveys information about the involved individuals and help the speakers express their social emotion in an implicit way.It is so important for real-world face-to-face interaction but is often blocked on the mobile telephony.To cope with this problem,we propose an afective computing model to assist the representation of social emotion and then help the progress of social interaction on the mobile telephony.In this model,for the purpose of real-time afective analysis,we delegate the computing loading to the cloud side service and enhance the system’s scalability and availability.The result of this experiment approves the feasibility of our system design for the applications of social intelligent.Also,the system provides a research framework of the social intelligent system on the mobile telephony.     

Boronic acid-functionalized nanoparticles: synthesis by microemulsion polymerization and application as a re-usable optical nanosensor for carbohydrates

Translucent boronic acid-carrying nanolatexes are prepared by copolymerisation of vinylbenzyl chloride in microemulsion followed by post functionalisation with 3-aminophenylboronic acid. The diol binding capacity and selectivity of the phenylboronic acid remain unchanged after anchoring to polymer nanoparticles (16 nm diameter, 0.22 mmol/g). The binding of a catechol dye, Alizarin Red S (ARS), to the boronic acid-carrying nanoparticles affords a colored, stable, nanolatex which is used for the selective visual detection of fructose in a competitive assay. The binding of fructose at pH 8.2 is readily evidenced by a color change and monitored by UV/Vis spectroscopy. The nanosensor can be regenerated in acidic medium. The entrapment of the nanolatex in a dialysis cell provides a re-usable support for binding and optical detection.     

基于超声传感技术在污水旋流池测量中的应用

为了能够准确地测量污水旋流池的液面高度,设计了基于超声传感技术的污水旋流池液面测量方法,通过长时间的运行,测量数据完全满足污水旋流池的生产工艺要求。     

Intergranular oxidation of silicon in 20Cr-25Ni niobium-stabilized stainless steel at 1140–1230 K

The kinetics of intergranular oxidation of silicon in a 20Cr-25Ni Nb-stabilized stainless steel are reported, at temperatures in the range 1140–1230 K, in CO₂ at 40 bar pressure. The depth of attack increased parabolically with respect to time, with an activation energy of 335±30 kJ/mol. The mechanism of growth is discussed in terms of classical internal-oxidation theories, and an alternative explanation based on an available-space theory is developed. The internal oxidation rates in a number of different alloys are compared with diffusivities of metals in the base alloy. It is proposed that intergranular oxidation in the 20–25 Nb steel is controlled by the rate of outward diffusion of iron or chromium in the alloy.     

Evolution of insoluble eutectic Si particles in anodic oxidation films during adipic-sulfuric acid anodizing processes of ZL114A aluminum alloys

The effects of insoluble eutectic Si particles on the growth of anodic oxide films on ZL114A aluminum alloy substrates were in-vestigated by optical microscopy (OM) and scanning electron microscopy (SE...