2-氯-5-氯甲基吡啶在气升环流反应器中的合成研究

A new process for the direct chlorination of 2-chloro-5-methylpyridine to yield 2-chloro-5-chloro-methylpyridine in an airlift loop reactor (ALR) has been studied.Five main reaction conditions including TR,na/ns,cp,Qg and dD/dR were optimized.The average molar yield and purity of 2-chloro-5-chloromethylpyridine obtained were 79% and 98.5% respectively under the optimum operating conditions.Finally,the efficiency for the preparation of 2-chloro-50chloromethylpyridine with ALR and stirred tank reactor(STR) respectively was compared.     

电纺直写制备聚己内酯支架形貌及精度

作为一种新型的微纳制造技术，熔体直写电纺被广泛用于组织工程支架的可控制备,有序的纤维沉积是该领域应用的前提条件。对于支架成型精度的探究，本文使用生物可降解材料聚己内酯（PCL），采用自行设计的熔体电纺三维可控成型设备进行实验，考察了纤维间距对二维并行纤维沉积形貌及成型精度的影响，以及纺丝电压和网格大小对三维网格结构形貌及精度影响。结果表明，随着并行纤维设定距离的增大，纤维的沉积误差减小，并最终趋于平稳。对于三维网格结构，随电压的增加，最大沉积层数量先增大后减小，当纺丝电压为6kV时达到最大沉积层数15层。成型精度误差先减小后增大，当纺丝电压为7kV时，精度最高误差小于5%。随设定网格边长的增大，沉积层数不断增大。成型精度逐渐提高，当网格边长大于等于1.5mm时，沉积误差趋于稳定，并维持在5%左右。     

Preparation and properties of water‐soluble polyester surfactants. II. Preparation and surface activity of silicone‐modified polyester surfactants

We prepared a novel series of water‐soluble silicone‐modified polyesters [poly(ethylene glycol) (PEG)–silicone polyesters] by reacting organopolysiloxane with a hydroxy‐terminated polyester. The polyesters were obtained by the polymerization of maleic anhydride and PEGs (molecular weights = 2000, 4000, 6000, 8000, and 10000). These water‐soluble PEG–silicone polyesters can be used as auxiliaries in dyeing process because they exhibit good surface activities such as surface tension, low foaming, and wetting power. The presence of these surfactants also retarded the rate of nylon dyeing with acid dyes. The retarding effect and low‐foaming property of these novel PEG–silicone polyesters make it possible for these surfactants to be used as leveling agents for modern nylon dyeing with acid dyes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3005–3012, 2002     

纳米氧化锌的制备与表征

对传统的直接沉淀法进行了改进 ,对反应温度、搅拌速度、投料方式及洗涤条件等多种因素对产物纳米氧化锌的影响进行了研究。结果表明 ,改进的直接沉淀法制备纳米氧化锌具有工艺简单、成本较低 ,能够得到六方晶系、球形 ,粒径约为 15～ 2 5nm的纳米氧化锌     

Production of antimicrobially active silk proteins by use of metal‐containing dyestuffs

The work presented here discusses a new technique for preparing silk fibers and films with persistent antimicrobial activity through use of metallic dyestuffs during the fiber dyeing process. The length of the silk fibers investigated contracted when the fibers were immersed in concentrated neutral salt solutions, such as calcium or potassium nitrate, at elevated temperature levels. The birefringence and molecular orientation of the silk fibroin molecules became less ordered by the action of the neutral salt solutions, resulting in increased dyestuff absorption. Subsequently, contracted silk fibers were dyed with metallic dyestuffs containing Cr or Cu for the purpose of obtaining silk fibers with antimicrobial activity. Silk fibers dyed with metallic dyestuffs showed significant antimicrobial activity against the plant pathogen Cornebacterium and the human pathogen Coli bacillus. Tensile strength of the silk fibers after the salt shrinking and dyeing processes did not show a significant change, whereas the elongation at break was increased slightly. The techniques described here for preparing significantly active antimicrobial silk fibers are effective and economic ways of providing new materials for industrial and biomedical applications. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1181–1188, 2002     

Solar Photocatalytic Degradation of Textile Dyes in TiO2 Suspended Solutions

The degradation and decolourization of direct dye (Everdirect supra turguoise blue, FBL), acidic dye (Isolan orange S-RL) and vat dye (Indanthren red FBB) have been investigated by solar/TiO2 process. The effects of solution pH, dye concentration, dosage of TiO2 and nano-size of TiO2 have been studied. The increase in initial pH (3, 5 and 11) and dye concentration decrease the removal rate. The treatment for FBB and FBL dye solutions is more efficient than that of S-RL.Under optimum conditions, the color removal is found to be almost complete for FBB and FBL while that of S-RL also reaches 95%. Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model (L-H model) have been fitted to the experimental data and found to correlate the adsorption patterns as well as the kinetics of the dyes studied.     

四旋翼直升机姿态系统的直接自修复控制

当四旋翼直升机执行器突发故障或突受干扰时,利用直接自修复控制技术,设计一种基于直接自适应滑模控制的四旋翼直升机姿控系统,使其在故障或干扰信息未知的情况下,仍能保持稳定并且跟踪上理想输出信号.系统的稳定性和跟踪性能是由Lyapunov稳定性定理来确保的,这体现在参数更新律的设计过程中.最后在3DOFhover实验平台上验证了该方法的有效性,同时将该方法与LQR方法作比较,进一步证明了所提算法的优越性.     

苯和乙烯一步法合成苯乙烯反应研究

首次采用苯和乙烯在无氧存在下, 于多种固体酸和金属负载HZSM-5分子筛催化剂上反应直接得到苯乙烯与其它固体酸相比, HZSM-5分子筛催化剂表现出最高的反应活性和较高的对苯乙烯的选择性。HZSM-5分子筛负载不同金属后, 苯乙烯的选择性均有明显提高, 其中以Co/HZSM-5、Fe/HZSM-5和Pd/HZSM-5催化剂显示出较高的反应活性和苯乙烯选择性。反应温度、苯烯比、金属负载量、液空速、催化剂的焙烧及还原温度均会不同程度地影响反应转化率和产物分布。     

直接凝固注模成型Si_3N_4及SiC陶瓷──基本原理及工艺过程

直接凝固注模成型（ｄｉｒｅｃｔｃｏａｇｕｌａｔｉｏｎｃａｓｔｉｎｇ，ＤＣＣ）是一种崭新的（准）净尺寸陶瓷成型方法。本文报道了采用此法成型Ｓｉ_３Ｎ_４及ＳｉＣ陶瓷的基本原理和工艺过程。ＤＣＣ成型工艺过程为把高固相含量低粘度的陶瓷浆料浇注到无孔模具中，事先加入到浆料中的生物酶及化学物质通过改变浆料的ｐＨ或电解质浓度来改变浆料的胶体化学行为，从而使浆料原位凝固，得到有足够脱模强度的陶瓷坯体。ＤＣＣ成型的特点为坯体密度高（理论密度的５５％～７０％），坯体均匀，不用或只需少量的有机添加剂（少于１％），可成型大尺寸、复杂形状、高可靠性的陶瓷部件。     

Reactive dye removal in dye/salt mixtures by nanofiltration membranes containing vinylsulphone dyes: effects of feed concentration and cross flow velocity

In this study, DS5 DK type nanofiltration membranes were tested to recycle the reactive dye bath effluents. Reactive black 5 (RB5), reactive orange 16 (RO16), reactive blue 19 (RB19) and NaCl were used in the experiments to prepare the synthetic dye and salt mixtures. Effects of feed concentration, pressure and cross flow velocity on the permeate flux and color removal were investigated. Permeate flux increased with increasing pressure for all NaCl solutions. Dye concentration had a significant effect on flux values. Under the fixed NaCl concentrations the flux decreased with increasing dye concentrations. Dye rejections greater than 99% were achieved. Permeate was almost colorless. A gel layer formed by the rejected dye on membrane surface operates as a resistance to the permeation of dyes due to complete rejection of high molecule weight dyes, especially for the low salt concentrations. The presence of salt concentration has an interesting effect on color removal. Color removal decreased with increasing salt concentration. Cross flow velocities had also a significant effect on flux values. The dye formed agglomerates at high NaCl concentrations. High cross flow velocities decreased this effect.