电化学方法研究碳钢高温水体系中的氢扩散和渗透

本文应用Devanathan渗透装置的原理,设计了一套能用于测量碳钢-高温水体系中氢在碳钢中的扩散和渗透的实验装置,找出了该装置用于测量的最佳工作参数,并用该装置测量了373—473K下氢在碳钢中的扩散系数和扩散速率,讨论了氢在碳钢上还原的机理。     

池窑拉丝DCS控制系统中mV信号的干扰与抗干扰

本文是对玻纤工业池窑拉丝DCS过程控制中，mV信号的干扰形成与抗干扰方法的总结。     

Direct ethoxylation of fatty methyl ester over Al-Mg composite oxide catalyst

For the purpose of estimating the reaction mechanism of the direct ethoxylation of a fatty ester in the presence of an Al-Mg composite oxide catalyst, a labeled fatty methyl ester C₁₁H₂₃CO¹⁸OCH₃ containing ¹⁸O isotope was synthesized and directly ethoxylated. The product was evaluated by gas chromatography-mass spectrometry (GC-MS). The GC-MS spectra showed that the ¹⁸O isotope label was present only in the methoxy group at the molecular end of the ethoxylated fatty methyl ester. This supports the reaction mechanism of coordination anionic polymerization where the bond between the acyl and methoxy groups of the fatty methyl ester molecule was broken, caused by the bifunctional effect of the acid-base active sites; an intermediate chemisorption species was formed; and then ethylene oxide was addition-polymerized sequentially, in parallel.     

熔体直纺工艺中粘度波动对长丝质量的影响

讨论了熔体粘度波动时熔体的可纺性、POY的物性指标及后加工性能、DTY的质量指标及其染色等情况。结果表明;熔体粘度偏低时,前纺飘丝断头增多,后纺伸头困难,POY和DTY的强度降低、伸长度增大,DTY有较多的点状僵丝,袜带吸色较深且有较多的色斑点;熔体粘度偏高时,熔体泵前压力偏低,后加工张力高,纸筒管易于破裂。POY和DTY纤度偏小,强度增大,伸长度减小,各种不匀增大,袜带吸色较浅且较为均匀。初步确定熔体粘度的波动范围应控制在1.615—1.650.     

甲乙酮工艺水处理装置的改造与应用

根据引进的甲乙酮生产装置仲丁醇反应工艺水处理中出现的问题，对所得实验数据进行分析，最终确定工艺水处理改造方案，并取得了良好的效果，使工艺水处理应用技术得到进一步提高。     

环氧丙烷-苯乙酮二元体系的恒温汽液平衡研究

采用改进的“p x法”汽液平衡测定装置测定二物质沸点差达 167.7℃的环氧丙烷 苯乙酮二元体系在3 0 0K、 3 0 5K下的p x数据 ;并用直接法计算确定平衡汽相组成y。     

煤液化技术研究现状及其发展趋势

能源安全和环境保护是我国21世纪应引起高度重视的问题,煤炭既是能源的主要提供者,也是大气污染的主要污染源,其高效洁净利用不容忽视,煤炭液化技术是解决此矛盾的有效途径之一。对煤液化的发展历程、开发和应用现状以及发展趋势和产业化前景进行了概括,详细介绍了煤直接液化、间接液化和煤与废塑料共液化技术的特性、影响因素及其关键问题,并提出了煤液化技术在我国今后发展的一些看法和建议。     

没食子酸异戊酯的合成研究

以壳聚糖硫酸盐为催化剂，用没食子酸与异戊酸直接酯化合成了没食子酸异戊酯，用正交试验确定了酸酸物质的量比、催化剂用量、反应时间对没食子酸异戊酯收率的影响。得到了最佳工艺条件：醇酸物质的量比为10：1，催化剂用量为1．0g，反应时间为4h，没食子酸异戊酯的收率可达96．2％。实验表明，该催化剂用于合成没食子酸异戊酯具有极好的催化活性和重复使用性。     

Characterization of conducting poly(3‐methylthiophene) films prepared under sono‐electrochemical conditions

Poly(3‐methlthiophene) films were prepared under “silent” and “sono‐electrochemical” potentiostatic (SEP) conditions. A three‐electrode one‐compartment sono‐cell was used with a working platinum disc electrode. The sono‐electrochemically formed polymer films were deposited with different working electrode‐to‐horn distances. The composition, electrochemical, spectroscopic, and morphological characteristics of the resulting polymer films were determined. Elemental analysis, FTIR‐spectra, and X‐ray photoelectron spectroscopy (XPS) data proved that the polymer films prepared under SEP conditions have predominant α‐α′‐couplings between the 3MT units, and the aromatic ring integrity is maintained in the film. Scanning electron microscopy showed that those films are more compact and less porous compared to the films prepared under silent conditions. The use of sono‐irradiation during electropolymerization enhanced the diffusion of the monomer units towards the electrode surface and resulted in relatively less doped polymers with less conductivity. Electrochemical impedance spectroscopy (EIS) data for films prepared under silent and SEP conditions were collected in a monomer‐free solution. The results show that the impedance of SEP films is relatively higher than those prepared under silent conditions, and a combination of charge transfer kinetics with diffusion‐controlled conduction mechanism within the films. The diffusion was found to be a function of the porosity of the film. Conductivity measurements are in good agreement with EIS, elemental analysis, and XPS data. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2416–2425, 2006     

Stabilization of Rössler chaotic dynamical system using fuzzy logic control algorithm

This paper proposes a fuzzy logic control algorithm (FLCA) to stabilize the Rössler chaotic dynamical system. The fuzzy logic control system is based on a Takagi-Sugeno-Kang inference engine and the stability analysis in the sense of Lyapunov is carried out using Lyapunov’s direct method. The new FLCA is formulated to offer sufficient inequality stability conditions. The asymptotic complexity of our algorithm is analyzed and proved to be lower in comparison with that of linear matrix inequality-based FLCAs. A set of simulation results illustrates the effectiveness of the proposed FLCA.