Metrological Support and Standards in the Design,Production, and Use of High-Load Weighing Machines in Russia

An analysis is presented on development, production, and use of high-capacity weighing machines in Russia in the last ten years. Aspects arising in type approval testing are considered for high-capacity weighing machines working over wide temperature ranges.     

纯铜双层辉光离子渗钛组织形成机理及性能分析

采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。用配有能谱仪(EDS)的扫描电子显微镜(SEM)、X射线衍射仪和透射电子显微镜对合金层的显微组织形貌、钛含量分布、相组成及相结构类型进行了观察与测定，对合金层的形成机理进行了探讨，并对其性能进行了对比测定。结果表明：渗钛层由合金层和扩散层组成，合金层主要由TiCu (Cu)固溶体 TiCu4构成，TiCu4为Dla型有序相，TiCu为B2型有序相，扩散层为(Cu)固溶体。渗钛处理后纯铜的表面得到显著强化。     

Thermally stimulated discharge current studies in pure and fe-doped polystyrene films

Studies were made on the thermally stimulated discharge currents (TSDCs) in pure (undoped) and Fe-doped polystyrene films as a function of polarizing field, polarizing temperature and dopant concentration. While undoped films exhibited a single peak, doped films showed two peaks one at low temperatures and another at high temperatures. The low temperature peak, which exhibits a shift towards lower temperatures with increasing dopant concentration, is attributed to the relaxation of the main chain, while the high temperature peak, which shows a tendency to shift towards higher temperatures with dopant concentration, is due to space charge polarization. The TSDCs were higher for low dopant concentrations than their undoped counterparts, while for high concentrations of the dopant, the TSDCs decreased. Formation of charge transfer complexes at low dopant concentrations and molecular aggregates at higher dopant concentrations are suggested as the possible reasons for this behaviour.     

高精度节能型电力稳压器

分析了现有交流稳压器的特点和不足,提出了新一代数控稳压器的理论和实际无均差系统的方法,给出了超高精度无均差稳压系统的实现方法.经全乐科技公司模拟试验,获得了很好的结果.市电220.4 V和220.5 V,试验样机采用3 V、9 V和27 V这3个变压器,已达到优于±1%的精度,符合大部分负载的实际需要,经用户单位试用半年,效果非常满意.     

Important features of Iris OSQL

OSQL is the object-oriented database language developed for the Iris object-oriented database management system at Hewlett-Packard Laboratories. Its three fundamental constructs are objects, types, and functions. This paper provides an overview of the underlying concepts and some important features of OSQL.     

氧气放电辅助激光淀积原位制备高T_c超导薄膜

采用低压氧气放电辅助的激光淀积方法,原位外延生长出零电阻温度91K,临界电流密度10~5A/cm~2的Y-Ba-Cu-O高温超导薄膜。扫描电镜和X光衍射分析结果表明,薄膜中超导相晶粒的生长具有c轴垂直于表面的择优取向。     

三维PDP放电过程数值模拟软件

介绍了三维PDP放电过程模拟软件，该软件可较真实地反映放电单元的实际情况，对放电性能进行优化设计，且具有通用性强、界面友好、使用方便、功能完善等特点。可对不同结构、不同气体成份、不同驱动电压及波形等情况进行计算。     

Microstructural changes in concretes with sulfate exposure

In prior papers the responses of concretes to 50,000 ppm MgSO₄ exposure depending on cement type, w/cm and the presence of slag were described. The present paper completes this analysis by examining the effects of immersion of concretes produced using slag blended cements, in solutions containing 50,000 ppm of sodium sulfate. The spatial evolution of microstructure associated with carbonation and sulfate attack show differences which can be related to the nature of the cation associated with the sulfate, the cement type, and the w/cm ratio.     

用热失重法确定水合粘土水分含量及存在形式

文章以蒙脱土为例，采用热失重法定性定量确定了水合粘土中结合水类型、界限及其相对含量，并与等温吸附法结果进行了对比。结果表明，用该方法得到的水合蒙脱土中各种水分的相对含量及总含水量与等温吸附实验结果相一致。热失重（25~250 ℃）分析结果表明，水合蒙脱土中水分子主要存在自由水、松散吸附结合水、紧密吸附水（强吸附结合水）3种状态，分别对应于25~75 ℃、75~120 ℃、120~230 ℃区间里的失水。从热失重（25~250 ℃）规律来看，仍存在两个明显的转折点p/ps=0.9、0.98，它们为粘土-水体系的两个特征湿度，前者为粘土表面强结合水与松散结合水（渗透结合水）之间的界限，后者为松散结合水与自由水之间的界限，这验证了等温吸附法确定的两个特征湿度及对粘土表面结合水界限划分的正确性。     

HYDRAULIC CHARACTERISTICS OF WATER-WINGS FOR THE MIDDLE-PIER OF A DISCHARGE TUNNEL

1. INTRODUCTION In the design of a discharge tunnel with high water head and large flow, it is important to study the cavitation and the energy dissipation, such as the prevention of cavitation for slots of various gates [1-4], the effects of entrained ai…