晋北吕梁群石榴石的特征及指示意义

石榴石是山西岚县袁家村一带-娄烦县出露的吕梁群地层中主要的特征变质矿物，其次为黑云母、十字石等，对这些特征变质矿物进行电子探针的成分分析及其相关计算，并利用不同采样点的矿物对估算该点变质温度和压力，最后得到石榴石的成分变化与变质程度之间的关系，进而阐明了石榴石中成分变化对变质温度与压力的指示意义。     

SiGe／Si多量子阱中垂直方向红外吸收及共振色散效应

用垂直入射的中红外光束调制非掺杂SiGe/Si量子阱中光致子带间吸收，氩离子激光器作为子带间跃迁的光泵浦源在阱中产生载流子，红外调制光谱用步进式傅立叶变换光谱仪记录，实验中观察到明显的层间干涉效应与子带间跃迁有关的色散效应，理论和实验分析认为样品折射率变化造成的位相调制可以补偿吸收所造成的幅度调制。     

瞬态瑞雷面波法在软岩地层勘探中的应用

结合工程实例，介绍了在物性条件和地质条件复杂地区利用面波勘探技术解决软岩地区第四系覆盖层及其岩埋深的勘探方法。     

Influence of nano-scaled dispersed second phase on substructure of deformed dispersion strengthened copper alloy

The deformation behavior of dispersion strengthened copper alloy Cu-Al2O3 was studied by TEM. The results show that nano-scaled dispersed second phase not only increases dislocation density in matrix, but also has an important influence on the dislocation substructure. The presence of fine dispersed Al2 O3 particles results in a uniform and random dislocation distribution in matrix copper and causes the difficulty in formation of dislocation cell structure and the decrease in the amount of cell structure during deformation. Deformation gives rise to much more dislocations and dislocation cells form more difficultly and the decrease in the cell size with the increase of dispersion degree.     

Effect of ionic content,solid content,degree of neutralization,and chain extension on aqueous polyurethane dispersions prepared by prepolymer method

There are many variables in the preparation of aqueous polyurethane (PU) dispersions. Carboxylic acid content, solid content, degree of pre/postneutralization of the carboxylic acids, and chain extension all impact dispersion particle size, viscosity, pH, molecular weights, and glass transition temperature. This study evaluated the impact of these variables on a given PU dispersion formulation prepared from isophorone diisocyanate, an aliphatic polyester polyol, dimethylol propionic acid, and hexamethylene diamine with triethyl amine as the neutralizing base and N‐methyl pyrrolidone as the cosolvent. Changes in carboxylic acid content, degree of preneutralization, and chain extension were found to have the expected impacts on dispersions properties. Increased ionic content in the dispersion step led to lower particle size and higher viscosity, increased chain extension with its concurrent increase in molecular improved subsequent film properties. Surprising results were obtained by varying the amount of postneutralization and from increased solids content at the time of dispersion. Unexpectedly, both of these variations led to much higher dispersion viscosities and particle size in solution. To have these changes take place, it is theorized that there is a major change in solution morphology caused by these modifications. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2514–2520, 2005     

箍筋末端135度弯钩二次就位法讨论

随着人们对建筑安全的日益重视 ,对建筑抗震要求的提高 ,国内外有关规范都对箍筋末端的设置作了明确规定 ,要求做成 135度弯钩。而在工程实践中 ,由于施工上的技术困难 ,很多工程都只设置成 90度弯钩。笔者提出的箍筋末端 135度弯钩二次就位法在基本不增加 90度弯钩施工难度与费用的基础上实现了 135度弯钩的施工 ,其法是可行的     

Formation of composites fabricated by exothermic dispersion reaction in A1-TiO2-B2O3 system

The formation of aluminum matrix composites fabricated by exothermic dispersion reaction in A1-TiO2-B2O3 system was investigated. The thermal analysis results show that the reactions are spontaneous and exothermic. The Gibbs free energy of α-Al2O3 is the lowest among all the combustion products, followed by TiB2 and Al3Ti. It is noted that when the B2O3/TiO2 mole ratio is below 1, the reaction products are composed of particle-like α-Al2O3, TiB2 and rod-like Al3Ti. The α-Al2O3 crystallites, resulting from the reaction between A1 and TiO2 or B2O3, are segregated at the grain boundaries due to a lower wettability with the matrix. SEM micrographs show that rod-like Al3Ti phase distributes uniformly in the matrix. When the BEO3/TiO2 mole ratio is around 1, the Al3Ti phase almost disappears in the composites, and the distribution of α-Al2O3 particulates is improved evidently.     

从关联分析法看如何改善沥青抗老化性能

用灰色关联分析法研究了沥青抗老化性能与沥青化学组成之间的关联程度，结果表明，影响再生沥青性质的主要因素是沥青中的芳烃和胶质的含量。通过添加芳香组分能改善沥青四组分之间的配伍性，从而可以改善再生沥青的抗老化性能。并通过对再生剂进行富芳处理，验证了上述结论。     

Preparation of clean coal by flotation following ultra fine liberation

This paper reports the results of current fundamental research at the Department of Process Engineering, University of Miskolc on the processing of clean coal from Mecsek bituminous coal, Southern Hungary. The theoretical possibility of the separation of different petrographic components was proven experimentally and their liberation degree was determined based on the petrographic composition, flotation kinetic study of isolated components (groups of components), scanning electron microscopy and microprobe analyses. The mill with stirred ball media was chosen for the ultra-fine liberation of the coal components. It was revealed that along with the liberation of coal components, their surface oxidation and spontaneous agglomeration, entrapping the mineral impurities take place in ultra-fine grinding. This paper discusses the interfacial phenomena occurring in the ultra-fine grinding process and their influence on the flotation. The concept for the advanced preparation of clean coal was developed, tested and proved. The main steps of this concept are the ultra-fine liberation in the stirred-media mill, the de-agglomeration of flocs spontaneously formed during the ultra-fine grinding and the induced (hydrophobic) flocculation with the following two-step flotation in a flotation column.     

连铸钢坯质量的原位统计分布分析研究

采用原位统计分布分析技术得到与样品原位置相对应的数以万计原始信号并对其进行系统解析，实现不同质量连铸钢坯试样的疏松度、均匀度以及夹杂物含量的定量表征。准确计算了连铸钢坯试样疏松度、碳元素的最大偏析度。提出铸坯各原位置成分含量的权重比率方法用以表征材料的均匀度，并提供了统计分布允许差范围内（C0±R）所占权重比率以及权重比率为95%置信度时，中位值置信扩展率（K）等2种判断模式。该方法以测量信息的原始性、原位性及统计性为特征，反映了连铸钢坯较大尺度范围内各化学组成及其形态的定量统计分布规律。采用上述方法可以