基于多目标优化的黔中区水资源配置研究

以黔中水利枢纽一期工程为研究对象,开展水资源优化配置研究。在分析黔中水利枢纽工程概况及水资源优化配置原则的基础上,建立了黔中水利枢纽工程水资源优化配置模型,采用多目标规划对模型进行求解,得出了2007,2015年和2020年水平年黔中灌区、贵阳市区以及安顺市区的水资源优化配置结果;同时,对供需平衡、经济效益和污水排放量3个指标进行了对比分析。该模型分析结果为黔中区水资源的配置提供了科学合理的依据。     

Application of a rice field experimental error distribution function to nitrogen-phosphorus-potassium fertilizer response model analysis

A distribution function of rice yield deviations from the mean was developed from field experiments with 555 plots at 16 sites in Zhejiang province, China, for three years. The deviation distribution in interval of 50kg/ha appeared as a symmetrical distribution with a high peak (Mean=0.279 [kg/ha], SD=240.686 [kg/ha]). Normality test using Kolmogrove-Smirnov test between the observed cumulative distribution and the normal cumulative distribution function indicates that the observed deviation distribution is not normal. An empirical exponential cumulative distribution function was developed. The distribution function was used to remove outliers during the development of a rice yield fertilizer response model, based on data from a non-replicated NPK field experiment.     

降雨量空间分布对山洪临界雨量的影响

山洪临界雨量是山洪灾害预报预警的重要基础,受降雨、土壤含水量以及下垫面的影响,其中降雨量空间分布是重要的影响因素之一。以湖北省崇阳县高堤河流域为例,采用HEC-HMS分布式水文模型计算设计洪水,试算法计算临界雨量,提出了降雨量空间分布系数,分析了降雨量空间分布系数与临界雨量的关系,探讨了降雨空间分布对临界雨量的影响。结果表明:当降雨从上游到下游逐渐减少时,达到相同成灾流量对应的临界雨量最大,暴雨中心在下游时临界雨量最小,说明降雨量空间分布对临界雨量影响显著。由分析可知,在山洪灾害预警实践中应根据实际的降雨空间分布对预警指标适当修正,对山洪进行动态雨量预警。     

海河流域典型河流沉积物粒度特征及分布规律

为了解海河流域典型河流沉积物粒度参数空间分布规律,对海河典型河流的表层沉积物进行采集并利用Mstersize2000激光粒度仪进行粒度分析。结果表明,海河典型河流沉积物平均粒径差异显著,分选状况总体较差;山区水系与平原水系相比,沉积物平均粒径减小,呈集中分布,水动力减弱;山区自北向南变化明显,水系沉积物平均粒径减小,分布集中化,分选状况变差,由极正偏-正偏,向对称方向变化,峰度向平坦方向趋近,水动力减弱,符合粒径自然变化规律;平原区水系沉积物粒径参数表明南北变化不明显,因受较多支流、河流-湖泊-洼淀湿地等复杂系统和人为干扰强烈的影响,南北无显著变化规律。总的来说,海河流域河流受人为干扰强度较大,河流沉积物源较为复杂,栖息地物理完整性差。     

Ultrasound as a Tool to Synthesize Nano-Sized Silica–Alumina Catalysts with Controlled Mesoporous Distribution by a Novel Sol–Gel Process

A novel sol–gel process is used to synthesize mesoporous silica–alumina catalysts with controlled pore size distribution without using templates or pore-regulating agents. The nitrogen sorption analysis shows that the synthesized materials have high specific surface area in the range 587–692 m²/g and similar mesoporous distribution within 2–11 nm. Ultrasound is applied to prepare precursor silica–alumina sol with narrow particle diameter distribution. By calculation, it is found that ultrasonic treatment is able to provide 22.94 kJ/mol energy, which is just in accordance with the weak bond's bonding energy. Based on the calculation result, it is proposed that the role of ultrasonic treatment followed by acid peptization is to provide energy to break down the weak bonds. After gelation, the regular and close packing of similar-sized sol particles is capable of formation of controlled-sized interstices which are the precursors of mesopores. Solid-state ²⁷Al MAS NMR and TEM are used to characterize the samples' structure and particle morphology. They show that most of the aluminum is located in the tetrahedral position in the present materials. According to TEM results, it is shown that the synthesized materials have spherical particles with size of about 15 nm.     

Designing multilayered wire‐grid polarizers using a monochromatic recursive convolution finite‐difference time‐domain algorithm

Multilayered wire‐grid polarizers (WGP) find application as low‐reflection polarizers in projection‐type liquid crystal display devices. A multilayered WGP is formed by adding thin layers on top of the metal ridges of an ordinary WGP. The ordinary WGP consists of a periodic array of parallel metal ridges, where the period of the array and the width of any individual metal ridge are typically less than the wavelength of the incident light. Such WGPs are often used as efficient polarizers. However, in certain applications, it is important to reduce the reflection from the WGP while preserving the polarization efficiency. One of the ways to achieve this goal is to add thin layers on top of the metal ridges of the ordinary WGP. The reduction in reflection from the multilayered WGP depends on the number and material of these additional layers. In this paper, we describe a design method for multilayered WGPs based on an effective medium theory, thin‐film computation method and a monochromatic recursive convolution finite‐difference time‐domain algorithm. The goal of design process is to identify suitable materials and thicknesses for the additional thin layers needed to lower the reflection appreciably. The design method is explained with the help of bilayered WGPs.     

一种改进的动态核主元分析故障检测方法

针对复杂工业系统动态非线性故障检测过程精度低和计算量大的问题,提出了一种改进的动态核主元分析故障检测方法，该方法首先利用不可区分度剔除相关程度较小或者不相关变量,减少数据量，然后通过观测值扩展对筛选后的新数据构建增广矩阵，并对矩阵使用核主元分析提取变量数据的非线性空间相关特征，最后通过监测T ²和SPE 两种统计量诊断出系统发生故障及识别故障变量。仿真实验证明，该方法能对风力发电机故障进行有效监测和诊断，与KPCA方法相比，改进的动态核主元分析方法对微小故障更为敏感。     

Pattern synthesis of time‐modulated conformal arrays by an improved differential evolution algorithm

In this article, an improved differential evolution algorithm (IDE) based on two different colonies is proposed and applied to time‐modulated conformal arrays syntheses. The whole population of IDE is divided into two parts. The one part searches the solution globally while the other searches the neighborhood of the solution provided by the previous one. Benchmark functions are provided to testify IDE. Furthermore, IDE is applied to synthetize sum‐difference patterns with a 1 × 16 elements time‐modulated circular array and low sidelobe level (SLL) patterns with an 8 × 12 elements time‐modulated cone array. After optimization, the sideband level (SBL) of the circular array at the first sideband frequency is ?1.00 dB. The SLL and SBL at the first sideband frequency of the cone array are lower than ?30.00 and ?20.00 dB, respectively. Experiment results verify the superior performance of IDE. Moreover, to accelerate the computation speed, graphics processing unit parallel computing technique is introduced into pattern synthesis and the acceleration ratios of more than 23 times can be achieved. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:697–705, 2014.     

MORM: A Multi-objective Optimized Replication Management strategy for cloud storage cluster

Effective data management is an important issue for a large-scale distributed environment such as data cloud. This can be achieved by using file replication, which efficiently reduces file service time and access latency, increases file availability and improves system load balancing. However, replication entails various costs such as storage and energy consumption for holding replicas. This article proposes a multi-objective offline optimization approach for replica management, in which we view the various factors influencing replication decisions such as mean file unavailability, mean service time, load variance, energy consumption and mean access latency as five objectives. It makes decisions of replication factor and replication layout with an improved artificial immune algorithm that evolves a set of solution candidates through clone, mutation and selection processes. The proposed algorithm named Multi-objective Optimized Replication Management (MORM) seeks the near optimal solutions by balancing the trade-offs among the five optimization objectives. The article reports a series of experiments that show the effectiveness of the MORM. Experimental results conclusively demonstrate that our MORM is energy effective and outperforms default replication management of HDFS (Hadoop Distributed File System) and MOE (Multi-objective Evolutionary) algorithm in terms of performance and load balancing for large-scale cloud storage cluster.     

Generating Web Traffic Based on User Behavioral Model

Generating web traffic is of great importance to analyze performance of new designed network, test new equipment, and verify new protocols, etc.. However, most existing traffic generation systems tend to simulate the overall characteristics of network traffic, while neglecting of the behavior of the individual users. Nevertheless, in principle, the emerged characteristics of overall traffic originate from the aggregation of individual users＇ access behavior. In this paper, we propose an innovative web traffic generating method based on user browsing behavior. Our method simulates the real users＇ accessing behavior, and visits the real web servers. Then, we design and develop a web traffic generating system. Because our system accesses the real websites, it can produce almost the real network traffic. The test results show that the traffic generated by our system has characteristics of burstiness and self-similarity, which are widely found and characterized in many real networks. In addition, our system can better reflect real user＇s web browsing behavior.