复杂曲面覆盖件模具CAM技术研究

本文基于UG软件提出了一种复杂曲面覆盖件模具的分区加工方法，并以汽车前盖内板的凸模加工为例，详细介绍了基于该法的模具CAM过程。     

磁力研磨在模具型腔精加工的应用

提出一种新的模具型腔精加工方法———磁力研磨法 ,并对该方法在模具型腔精加工中的应用给予了充分的论证 ,同时对影响磁力研磨的一些因素进行了讨论 ,提出了该技术在模具精加工中的应用前景     

大型精密机械设备的验收与管理

对学院使用的大型精密机械设备——五轴加工中心和数控铣床等设备的安装条件、验收指标、技术管理和日常维护进行了阐述,确保设备到位后及时安装和有效使用。     

自由曲面数控加工走刀方向的优化研究

走刀方向对数控加工的效率有重要影响，尤其对于多曲面拼接自由曲面不规则轮廓区域的数控加工。针对现有自由曲面数控加工过程走刀方向优化研究存在的问题，提出了基于曲面数控加工区域划分的走刀方向优化策略，建立了简化的刀具轨迹计算模型和加工时间模型，并用实例加以验证，取得了满意的效果。     

纳米技术与特种加工

对纳米技术与特种加工进行了简要的分析和讨论，内容包括：微细刻蚀、LIGA、微细特种加工、纳米切削、基于扫描探针技术的纳米加工等。     

Probability of precision micro-machining of insulating Si3N4 ceramics by EDM

Electrical discharge machining (EDM) is used as a precision machining method for the electrically conductive hard materials with a soft electrode material. But recently we succeeded to machine on insulating material by EDM. The technology is named as an assisting electrode method. The EDMed surface is covered with the electrical conductive layer during discharge. The layer holds the electrical conductivity during discharge. For micro-EDM, the wear of tool electrode becomes lager ratio than the normal machining. So the micro-machining is extremely difficult to get the precision sample.

In this paper to obtain a fine and precise ceramics sample, some trials were carried out considering the EDM conditions, tool electrodes material and assisting electrode materials. Insulating Si₃N₄ ceramics were used for workpiece. The machining properties were estimated by the removal rate and tool wear ratio. To confirm the change of micro-machining process, the discharge waveforms were observed. The micro-machining of the Ø0.05 mm hole could be machined with the commercial sinking electrical discharge machine.     

X3016圆台铣床夹具液压系统改造

通过实例，简要分析了液压干涉现象对薄壁件加工质量的影响，整改措施涉及液压系统工作可靠性，压力稳定性以及液压节能技术等。     

100 MN双动铝挤压机主柱塞的机械加工工艺

介绍了国内首台万吨铝挤压机关键零部件主柱塞的加工工艺 ,以及在大型卧式车床上加工大直径、高光洁度阶梯深孔、盲孔的加工方法及工艺流程和所需工装设计等。     

Microstructures of worn surface and wear debris of as-cast Al-17Si-xLa alloys under unlubricated conditions

1　INTRODUCTIONAl Sialloyshavebeenwidelyusedasthetribo logicalcomponentsininternalcombustionenginesfortheirhighresistancetowearandseizure ,andhighspecificstrength .Therefore ,thewearbehaviorsofAl Sialloysagainstvariouscounterfaces (typicallyacastironcounterface)havebeeninvestigatedexten sively[16 ] .Themutualtransferofmaterialbetweentwoslidingcounterfacesisinvariablyinvolvedinawearprocess ,especiallyunderdryorunlubricatedconditions ,leadingtotheformationofamechanicallymixedlayerattheworn…     

钨钴硬质合金电化学蚀刻加工研究

对YG6硬质合金电化学蚀刻工艺进行了研究,提出了采用光致抗蚀剂作保护膜,在生成一定钝化膜的情况下进行电化学蚀刻的方法.在一定的蚀刻深度范围内,该工艺的可控性好、腐蚀区表面质量较好.