动态规划模型在生产存贮中的应用

利用动态规划模型研究了生产管理中生产存贮问题的数学模型，给出了动态规划的最优性原理和动态规划基本方程，并给出了该数学模型求解的一个实例。     

Lipase‐catalyzed dynamic kinetic resolution of (R,S)‐fenoprofen thioester in isooctane

A lipase‐catalyzed enantioselective hydrolysis process under in situ racemization of the remaining (R)‐thioetser substrate with trioctylamine as the catalyst was developed for the production of (S)‐fenoprofen from (R,S)‐fenoprofen 2,2,2‐trifluoroethyl thioester in isooctane. Detailed investigations of trioctylamine concentration on the enzyme activation and the kinetic behavior of the thioester in racemization and enzymatic reactions were conducted, in which good agreement between the experimental data and theoretical results was observed. © 2002 Society of Chemical Industry     

现场双面动平衡在离心式多级叶轮风机上的应用

对离心式多级叶轮风机进行振动频谱分析，认为叶轮存在动不平衡，造成风机振动超标，采用现场双面动平奢技术消除了风机转轴动不平衡。     

DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

P／MCs新型复合材料制备、结构及阻尼性能

采用特殊的渗流法所制备的新型Ｐ／ＭＣｓ复合材料，由高分子聚合物与蜂窝状铝架组成，它具有优异的阻尼性能，并简述了结构对阻尼的影响     

动态不确定多输入多输出系统的变结构鲁棒控制

本文仅利用输入输出数据给出了一种动态不确定多输入多输出系统的变结构控制器设计机制，控制系统的设计中引入了一个严格正实的模型．应用适当逻辑切换的状态变量滤波器实现变结构控制．证明了所提方案能保证全局输出有界稳定并能实现滑模控制和渐近跟踪参考模型的输出．该设计方案对结构不确定性具有一定的鲁棒性．仿真结果表明了所提方案的有效性．     

Convergence of iterated boolean sums of simultaneous approximants

Explicit error estimates are given for the iterated Boolean sum of a sequence of simultaneous approximants; the rate of convergence is shown to be improved for smooth functions. The general results are applied in the case of the Bernstein, Durrmeyer and Stancu operators.     

Hierarchical production control for a flow shop with dynamic setup changes and random machine breakdowns

In this paper, we study a manufacturing system consisting of two machines separated by two intermediate buffers, and capable of producing two different products. Each product requires a constant processing time on each of the machines. Each machine requires a constant non-negligible setup change time from one product to the other. The demand rate for each product is considered to be piecewise constant. Each machine undergoes failure and repair. The time-to-failure and time-to-repair are exponentially distributed random variables. The setup change and processing operations are resumable. We model our system as a continuous time, continuous flow process. An optimal control problem is formulated for the system to minimize the total expected discounted cost over an infinite horizon. To determine the optimal control policy structure, a discrete version of the problem is solved numerically using a dynamic programming formulation with a piecewise linear penalty function. A real-time control algorithm is then developed with the objective of maintaining low work-in-process inventory and keeping the production close to the demand. The algorithm uses a hierarchical control structure to generate the loading times for each product on each machine in real time and to respond to random disruptions in the system. The system is simulated using this algorithm to study its performance. The performance of the algorithm is also compared to alternative policies.     

Dynamic elastic-plastic buckling phenomena in a rod due to axial impact

Dynamic elastic-plastic buckling phenomena which might develop in a rod from an axial impact loading are studied in order to identify the conditions for quasi-static behaviour. A discrete model for dynamic elastic-plastic buckling, which retains the axial and the lateral inertia forces, is proposed, and the relationship between the model parameters and the characteristics of an actual structure is given. Examples of different external loadings and boundary conditions are considered in order to clarify the influence of elastic-plastic axial wave propagation on the buckling process. The critical time for the initiation of buckling is obtained and the post-buckling behaviour of the model is analysed. Particular attention is paid to the role of the striking mass on the characteristics of the buckling process and on the development of the buckling shape. The numerical study reveals that the inertia of the striking mass affects considerably the development of the buckling shape causing different patterns of axial strain distributions at the initiation of buckling. The comparisons which are made between the model predictions and some previously published experimental data show that the buckling process is governed by the impact velocity as well as by the external loading history provided by the experimental technique.