Mechanical properties of a cryogenically mechanically alloyed polycarbonate–poly(aryl ether ether ketone) system

The processing–property relationship of a model cryogenically mechanically alloyed polymer–polymer system [polycarbonate (PC) and poly(aryl ether ether ketone) (PEEK)] was investigated. PC and PEEK powders were cryogenically mechanically alloyed for 10 h, and the resulting two‐phase powder particles were processed into testable coupons with a miniature ram‐injection molder. The bulk mechanical properties of the coupons made from the mechanically alloyed powders and nonmechanically alloyed powders were investigated as a function of mechanical alloying and injection‐molding parameters. The injection‐molded coupons were mechanically tested in the three‐point‐bending mode. The results demonstrated that no measurable improvement was achieved in the energy to break, strain at failure, or failure strength in the coupons made from the mechanically alloyed materials in comparison with those of the coupons made from the nonmechanically alloyed powders. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1196–1202, 2003     

模拟培训器的应用

简要介绍模拟培训器的应用及其优越性，重点介绍渭河化肥厂模拟培训器的结构，功能，特点及应用情况，并且对培训器中存在问题进行了分析。     

Reactive surfactants in heterophase polymerization. XVII. Influence of the surfactant on the mechanical properties and hydration of the films

In the context of a European union‐supported network on “Reactive Surfactants for Heterophase Polymerization,” different polymerizable surfactants (surfmers) have been synthesized and engaged in the emulsion polymerization of styrene, butyl acrylate, and acrylic acid. The thermomechanical properties of films cast from these different latices are reported in this article. The evolution of the mechanical properties with temperature and the effect of water molecules on these properties are studied. We observed that the studied surfactants do not influence the properties of the dry films. However, some differences due to grafting of reactive surfactants appeared when the films were wet. The amount of water uptake is drastically decreased when only reactive surfactants are present in the film. Concerning the mechanical behavior of the wet films, a decrease of the plastic flow stress is observed for all the samples whatever the nature of the surfactant (reactive or conventional). Hence, calorimetric measurements and dynamic mechanical analysis are used to identify the possible mechanisms that induce the change in the mechanical behavior of the latex films. In the case of reactive surfactant grafted to the polymer, the very low value of water uptake is accompanied by a plasticization of the polymer. In contrast, no plasticizing effect is observed in the case of nonreactive surfactant, even if the amount of water is very large. Finally, the tensile behavior of the styrene–butyl acrylate copolymer versus temperature is analyzed in the frame of the quasi point defects (qpd) model. Both rubber elasticity and chain orientation effects are taken into account to describe the behavior laws at large extensions (i.e., ? ≈ 1.2). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1686–1700, 2002; DOI 10.1002/app.10548     

BPO和AIBN作引发剂对阳离子交换膜性能的影响

改进传统制备聚偏氟乙烯(PVDF)均相阳离子交换膜的方法,利用引发剂和浓硫酸磺化直接制备PVDF均相阳离子交换膜。通过溶剂蒸发法制备了含引发剂过氧化苯甲酰(BPO)和/或偶氮二异丁腈(AIBN)的PVDF阳离子交换膜,研究不同引发剂及其含量对膜结构和膜性能的影响。利用FE-SEM和FTIR分析了膜的形貌结构。结果表明:含有BPO的阳离子交换膜中PVDF与苯乙烯形成了半互穿网络结构,而含有AIBN的阳离子交换膜中苯乙烯接枝在线性PVDF链上并形成相分离结构。PVDF阳离子交换膜的结构和性能受膜制备时AIBN和BPO的添加量影响。当AIBN占PVDF5%(质量分数)、BPO占PVDF2%(质量分数)时,离子交换膜的膜电阻达最低值4.2Ω×cm~2,离子交换容量最高为1.59 meq/g;当AIBN占PVDF 3%(质量分数)、BPO占PVDF2%(质量分数)时,离子交换膜的迁移数为95.15%。最后通过循环伏安法和计时电位法进一步验证了引发剂对膜电阻和迁移数影响的实验结论。     

CO2混合物热物性在CCS研究中的作用:实验数据、理论模型和典型应用

二氧化碳捕集与封存（CCS）各工艺过程的设计、运行都依赖于对CO₂及其混合物热物理性质的深入理解。同时，CCS的规模化发展和商业化进程，对CO₂混合物及其热物性的准确性提出了更高的要求。本文从实验数据、理论模型和典型应用3个方面综述了CO₂及其混合物热物性的发展现状，并尝试对发展趋势进行归纳。在实验研究方面，CO₂混合体系的研究进展视组分不同，差异较大，其中CO₂-N₂、CO₂-CH₄、CO₂-H₂O和CO₂-H₂二元体系已形成较完善的物性数据库，而CO₂-NH₃、CO₂-NO _x 和CO₂-CO体系的物性数据还比较欠缺；在物性估算方面，面向CCS的物性估算模型研究自2008年开始活跃，基于不同理论构架，目前已逐步形成面向CCS的多元化的物性估算体系。物性研究在CCS中的应用主要体现在物性是支撑CCS过程研究的基础，其不准确性在过程模拟或计算中会被“放大”，从而影响过程评估的准确性，本文从物性在循环构建和能效分析中的作用以及CO₂水合物的形成3个方面入手做了说明。文章最后对面向CCS的物性研究趋势进行了梳理，对分子模拟技术、通用性强的物性估算模型和物性在过程设计和循环分析中的角色进行了展望。     

基于动态朴素贝叶斯分类器的明渠水华风险评估模型

水华风险不仅是水利工程规划时需要考虑的环境问题,也是水利设施运营时不能忽视的监测项目。为了提高明渠水化风险等级预测的准确率,针对水华成因的不确定性和发展的时序性,基于动态朴素贝叶斯网络分类器提出一种应用于明渠的水华风险评估模型。模型用水华风险等级结点对应藻叶绿素a(Chla)的浓度,并考虑了9项影响水藻生长的因素。采用主成分分析法,处理专家咨询结果,进行参数的设计。在苏州河道北门桥2011年6月初至9月初观测的53例连续监测数据上,与基于朴素贝叶斯网络分类器的评估模型进行比较实验。混淆矩阵显示对中等风险情况的预测识别率提高了15.625%,单尾配对t检验表明在显著性水平0.05时,两模型预测识别率差异显著。考虑了时序特征的基于动态贝叶斯网络分类器的评估模型对明渠中等水化风险的预测识别率提高显著。     

快速闸门断流的轴流泵起动过程三维数值模拟

针对轴流泵机组起动过程的研究是泵站安全稳定运行研究的重要环节。为了准确捕捉轴流泵机组在起动过渡过程中的动态特性,建立轴流泵机组的全流道三维模型,采用三维CFD计算软件Fluent,利用基于有限体积法的动网格技术,配合VOF多相流模型对快速闸门断流的轴流泵机组起动过程进行了三维瞬态数值模拟,获得了轴流泵机组起动过渡过程中的流态变化及外特性参数的变化规律。闸门开启时间为60s时,机组起动扬程在12s时达到最大值2.76m,为运行扬程的1.28倍。减小快速闸门开启时间能够降低机组最大起动扬程,但同时会加剧回流及闸门处的水流撞击。计算结果表明:动网格技术结合VOF多相流模型可以较好的应用于快速闸门断流的轴流泵机组起动过渡过程数值模拟中,其结果可为泵站水力设计及轴流泵机组的过渡过程研究提供参考。     

Carbon membranes from cellulose and metal loaded cellulose

The focus of this work was to find a low-cost precursor for carbon molecular sieve (CMS) membranes, and a simple way of producing them. In addition, several ways of modifying a carbon material are described. The modification method used in this study was metal doping of carbon. CMS membranes were formed by vacuum carbonization of cellulose and metal loaded cellulose. Metal additives include oxides of Ca, Mg, Fe(III) and Si, and nitrates of Ag, Cu and Fe(III).The carbon membrane containing Fe-nitrate has promising separation performance for the gas pairs O₂/N₂ and CO₂/CH₄. Carbon containing nitrates of Cu or Ag show high selectivity, but reduced O₂ and CO₂ permeability compared to carbon with Fe-nitrate. Element analysis indicates that Cu migrates to the carbon surface, creating an extra layer resistance to gas transport. A silver mirror is also seen on the surface of Ag-nitrate-containing carbon. However, the Ag- and Cu-containing membranes show a high H₂ permeability. Adding metal oxides makes the carbon membranes retard the transport of easily condensable gases (e.g. CO₂). This can be exploited for enhanced H₂/CO₂ separation efficiency.     

界面改性剂对PP/滑石粉形态结构和性能影响

用在50L固相接枝反应器中合成的等规聚丙烯接枝马来酸酐(PP-g—MAH)作界面改性剂，制备了PP—g—MAH／PP／滑石粉复合材料。研究了PP—g—MAH／PP／滑石粉复合材料的形态结构和力学性能。结果表明，PP—g—MAH对PP／滑石粉复合物的缺口冲击强度、弯曲强度和拉伸强度均有增强作用；PP—g—MAH对PP／滑石粉复合物表观粘度几乎没有影响。SEM观察发现PP—g—MAH对PP／滑石粉复合物相界面有明显的改善。     

发色团含有乙撑基或乙烯撑桥基的碳菁合成及其光谱和增感性能

本文研究发色团α,α′ 位上具有乙撑基和乙烯撑桥基的碳菁合成通法 ,染料的立体结构、质子化倾向和萤光特性。探讨了多甲川发色团的α,α′ 位桥基和中位取代基对硫碳菁在长波区域的电子吸收光谱的影响。研究结果指出 :多甲川链上含有乙撑桥的硫碳菁有可能使照相卤化银乳剂在远红区和近红外光谱区产生高效的光谱增感作用。